630 lines
13 KiB
Text
630 lines
13 KiB
Text
|
/*
|
||
|
|
* Copyright 2017 Gateworks Corporation
|
||
|
|
*
|
||
|
|
* The code contained herein is licensed under the GNU General Public
|
||
|
|
* License. You may obtain a copy of the GNU General Public License
|
||
|
|
* Version 2 or later at the following locations:
|
||
|
|
*
|
||
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
||
|
|
* http://www.gnu.org/copyleft/gpl.html
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
/* these are used by bootloader for disabling nodes */
|
||
|
|
aliases {
|
||
|
|
led0 = &led0;
|
||
|
|
led1 = &led1;
|
||
|
|
led2 = &led2;
|
||
|
|
usb0 = &usbh1;
|
||
|
|
usb1 = &usbotg;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
bootargs = "console=ttymxc1,115200";
|
||
|
|
};
|
||
|
|
|
||
|
|
backlight {
|
||
|
|
compatible = "pwm-backlight";
|
||
|
|
pwms = <&pwm4 0 5000000>;
|
||
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||
|
|
default-brightness-level = <7>;
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||
|
|
|
||
|
|
led0: user1 {
|
||
|
|
label = "user1";
|
||
|
|
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
|
||
|
|
default-state = "on";
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
};
|
||
|
|
|
||
|
|
led1: user2 {
|
||
|
|
label = "user2";
|
||
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led2: user3 {
|
||
|
|
label = "user3";
|
||
|
|
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
user_pb {
|
||
|
|
label = "user_pb";
|
||
|
|
|
||
|
|
gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
|
||
|
|
linux,code = <256>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory {
|
||
|
|
reg = <0x10000000 0x40000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pps {
|
||
|
|
compatible = "pps-gpio";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pps>;
|
||
|
|
gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_1p0v: regulator-1p0v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "1P0V";
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1000000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_3p3v: regulator-3p3v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "3P3V";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "usb_h1_vbus";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "usb_otg_vbus";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
||
|
|
enable-active-high;
|
||
|
|
};
|
||
|
|
|
||
|
|
dsa {
|
||
|
|
compatible = "marvell,dsa";
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
dsa,ethernet = <&fec>;
|
||
|
|
dsa,mii-bus = <&mdio>;
|
||
|
|
|
||
|
|
switch@0 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
reg = <0 0>; /* MDIO address 0, switch 0 in tree */
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
label = "lan4";
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
label = "lan3";
|
||
|
|
};
|
||
|
|
|
||
|
|
port@2 {
|
||
|
|
reg = <2>;
|
||
|
|
label = "lan2";
|
||
|
|
};
|
||
|
|
|
||
|
|
port@3 {
|
||
|
|
reg = <3>;
|
||
|
|
label = "lan1";
|
||
|
|
};
|
||
|
|
|
||
|
|
port@5 {
|
||
|
|
reg = <5>;
|
||
|
|
label = "cpu";
|
||
|
|
fixed-link {
|
||
|
|
speed = <1000>;
|
||
|
|
full-duplex;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&clks {
|
||
|
|
assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
|
||
|
|
<&clks IMX6QDL_CLK_LDB_DI1_SEL>;
|
||
|
|
assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
|
||
|
|
<&clks IMX6QDL_CLK_PLL3_USB_OTG>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&fec {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_enet>;
|
||
|
|
phy-mode = "rgmii-id";
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mdio: mdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
eeprom1: eeprom@50 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x50>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom2: eeprom@51 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x51>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom3: eeprom@52 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x52>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom4: eeprom@53 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x53>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gsc: gsc@20 {
|
||
|
|
compatible = "gw,gsc";
|
||
|
|
reg = <0x20>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <4 1>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
|
||
|
|
/* GSC watchdog */
|
||
|
|
watchdog {
|
||
|
|
compatible = "gw,gsc_wdt";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Linux input events from GSC interrupt events */
|
||
|
|
input {
|
||
|
|
compatible = "gw,gsc_input";
|
||
|
|
interrupt-parent = <&gsc>;
|
||
|
|
interrupts = <0 1 2 5 7>;
|
||
|
|
interrupt-names = "button", "key-erased", "eeprom-wp", "tamper", "button-held";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gsc_gpio: pca9555@23 {
|
||
|
|
compatible = "nxp,pca9555";
|
||
|
|
reg = <0x23>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
interrupt-parent = <&gsc>;
|
||
|
|
interrupts = <4>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gsc_hwmon: hwmon@29 {
|
||
|
|
compatible = "gw,gsc_hwmon";
|
||
|
|
reg = <0x29>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gsc_rtc: ds1672@68 {
|
||
|
|
compatible = "dallas,ds1672";
|
||
|
|
reg = <0x68>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
/* LSM9DS1 magnetic sensor */
|
||
|
|
lsm9ds1-m@0x1c {
|
||
|
|
compatible = "st,lsm9ds1-mag";
|
||
|
|
reg = <0x1C>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_imu_mag>;
|
||
|
|
gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; /* IRQ */
|
||
|
|
rot-matrix = /bits/ 16 <(1) (0) (0)
|
||
|
|
(0) (1) (0)
|
||
|
|
(0) (0) (1)>;
|
||
|
|
poll-interval = <100>;
|
||
|
|
min-interval = <13>;
|
||
|
|
fs-range = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* LSM9DS1 accelerometer/gyroscope sensor */
|
||
|
|
lsm9ds1-ag@0x6a {
|
||
|
|
compatible = "st,lsm9ds1-acc-gyr";
|
||
|
|
reg = <0x6A>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_imu_acc>;
|
||
|
|
gpios = <&gpio4 18 GPIO_ACTIVE_LOW>, /* INT1 */
|
||
|
|
<&gpio4 19 GPIO_ACTIVE_LOW>; /* INT2 */
|
||
|
|
rot-matrix = /bits/ 16 <(1) (0) (0)
|
||
|
|
(0) (1) (0)
|
||
|
|
(0) (0) (1)>;
|
||
|
|
g-poll-interval = <100>;
|
||
|
|
g-min-interval = <2>;
|
||
|
|
g-fs-range = <0>;
|
||
|
|
x-poll-interval = <100>;
|
||
|
|
x-min-interval = <1>;
|
||
|
|
x-fs-range = <0>;
|
||
|
|
aa-filter-bw = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
touchscreen: egalax_ts@04 {
|
||
|
|
compatible = "eeti,egalax_ts";
|
||
|
|
reg = <0x04>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&ldb {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
lvds-channel@0 {
|
||
|
|
fsl,data-mapping = "spwg";
|
||
|
|
fsl,data-width = <18>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
display-timings {
|
||
|
|
native-mode = <&timing0>;
|
||
|
|
timing0: hsd100pxn1 {
|
||
|
|
clock-frequency = <65000000>;
|
||
|
|
hactive = <1024>;
|
||
|
|
vactive = <768>;
|
||
|
|
hback-porch = <220>;
|
||
|
|
hfront-porch = <40>;
|
||
|
|
vback-porch = <21>;
|
||
|
|
vfront-porch = <7>;
|
||
|
|
hsync-len = <60>;
|
||
|
|
vsync-len = <10>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
||
|
|
reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm4>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
||
|
|
fsl,uart-has-rtscts;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart4 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
||
|
|
fsl,uart-has-rtscts;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart5 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg {
|
||
|
|
vbus-supply = <®_usb_otg_vbus>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
||
|
|
disable-over-current;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbh1 {
|
||
|
|
vbus-supply = <®_usb_h1_vbus>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usdhc3 {
|
||
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
||
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
||
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
||
|
|
non-removable;
|
||
|
|
vmmc-supply = <®_3p3v>;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wdog1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
|
fsl,ext-reset-output;
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
imx6qdl-gw5904 {
|
||
|
|
pinctrl_enet: enetgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
|
||
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
|
||
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
||
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
||
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
||
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
||
|
|
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
|
||
|
|
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
|
||
|
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1: i2c1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c2: i2c2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c3: i2c3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_imu_acc: gpioimxaccgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* INT1 */
|
||
|
|
MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1b0b0 /* INT2 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_imu_mag: gpioimxmaggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 /* IRQ */
|
||
|
|
MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* data ready */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pcie: pciegrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pmic: pmicgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pps: ppsgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm2: pwm2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm3: pwm3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm4: pwm4grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart1: uart1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart2: uart2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart3: uart3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart4: uart4grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
|
||
|
|
MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart5: uart5grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usbotg: usbotggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */
|
||
|
|
MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3: usdhc3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
||
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
||
|
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059
|
||
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
|
||
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
|
||
|
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9
|
||
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9
|
||
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
|
||
|
|
MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9
|
||
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9
|
||
|
|
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wdog: wdoggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|