2015-12-04 12:32:44 +00:00
|
|
|
#!/bin/sh
|
|
|
|
|
#
|
|
|
|
|
# Copyright (C) 2011-2015 OpenWrt.org
|
|
|
|
|
#
|
|
|
|
|
|
2015-12-11 15:26:06 +00:00
|
|
|
. /lib/functions/uci-defaults.sh
|
2015-12-04 12:32:44 +00:00
|
|
|
. /lib/functions/system.sh
|
|
|
|
|
. /lib/functions/lantiq.sh
|
|
|
|
|
|
|
|
|
|
board_config_update
|
|
|
|
|
|
|
|
|
|
vpi=1
|
|
|
|
|
vci=32
|
|
|
|
|
annex="a"
|
|
|
|
|
encaps="llc"
|
|
|
|
|
payload="bridged"
|
|
|
|
|
lan_mac=""
|
|
|
|
|
wan_mac=""
|
2016-01-01 21:19:32 +00:00
|
|
|
interface_wan=""
|
2015-12-04 12:32:44 +00:00
|
|
|
|
2017-03-17 15:21:30 +00:00
|
|
|
board=$(board_name)
|
2015-12-04 12:32:44 +00:00
|
|
|
|
|
|
|
|
case "$board" in
|
2016-08-25 20:19:00 +00:00
|
|
|
ACMP252|GIGASX76X)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
|
|
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
|
|
|
|
;;
|
|
|
|
|
|
lantiq: add Allnet ALL0333CJ support
This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ.
Specifications:
- SoC: Amazon-SE
- RAM: 16MB
- Storage: 4MB NOR FLash
- LEDs: Power, Ethernet, DSL (Sync)
- Buttons: 1x Reset Button (not currently supported, will be done)
- 1x Ethernet-Port: 1x RJ45 10/100BaseTX
- 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+)
Installation:
- can be done via telnet+tftp or serial console
- default passwords:
- via telnet (root:admin)
- via webinterface http://172.16.1.254:8235/ (admin:coolwhite)
Installation via telnet / tftp:
host: # your own host must have an tftpd daemon, then do this:
host: ifconfig eth0:172 172.16.1.1 up
host: # telnet to allnet modem, root:admin
host: telnet 172.16.1.254
modem: # kill this daemon, it spams your console
modem: killall dsl_cpe_control
modem: # change to some place in ram:
modem: cd /ramdisk/tftp_upload
modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage
modem: tftp -g -r uImage 172.16.1.1
modem: # load these extra tools from your tftpd via:
modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz
modem: tftp -g -r flashwrite 172.16.1.1
modem: tftp -g -r fw_setenv 172.16.1.1
modem: tftp -g -r fw.conf 172.16.1.1
modem: ln -s fw_setenv fw_printenv
modem: chmod +x *
modem: ./fw_setenv disable_recovery y
modem: ./fw_setenv kernel_addr 0xb0010000
modem: ./flashwrite /dev/mtd/1 uImage 0
Installation via serial line at uboot:
uboot: # erase everything exept bootloader
uboot: protect on b0000000 +10000; protect on b03f0000 +10000
uboot: erase all
uboot: # get new firmware via tftp:
uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000
uboot: # copy to flash:
uboot: cp.b 0x80100000 $(kernel_addr) $(filesize)
uboot: # disable proprietary image checking:
uboot: setenv disable_recovery=y; saveenv
uboot: # reboot with LEDE ;)
uboot: reset
Ethernet works as expected, DSL syncronization does not work properly
currently, I am working on this issue.
Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
2017-02-26 20:29:37 +00:00
|
|
|
ALL0333CJ)
|
|
|
|
|
annex="b"
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_set_interface_lan 'eth0'
|
|
|
|
|
;;
|
|
|
|
|
|
2015-12-04 12:32:44 +00:00
|
|
|
ARV4510PW)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-08-25 20:19:00 +00:00
|
|
|
ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-25 20:19:00 +00:00
|
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-08-25 20:19:00 +00:00
|
|
|
ARV4520PW)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-25 20:19:00 +00:00
|
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-06-20 16:47:38 +00:00
|
|
|
ARV7506PW11)
|
2016-08-02 20:27:16 +00:00
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
2016-06-20 16:47:38 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
2016-06-20 16:47:38 +00:00
|
|
|
;;
|
|
|
|
|
|
2015-12-04 12:32:44 +00:00
|
|
|
ARV7519PW)
|
2016-08-02 20:27:16 +00:00
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-08-25 20:19:00 +00:00
|
|
|
ARV7519RW22)
|
|
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2017-02-02 23:59:16 +00:00
|
|
|
"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
|
2016-08-25 20:19:00 +00:00
|
|
|
;;
|
|
|
|
|
|
lantiq: add support for the Alpha ASL56026
The ASL56026 is a VDSL2 router with dual 100mbit ethernet,
also known as the ECI B-FOCuS V-2FUb/I.
CPU: Lantiq XRX268 v1.1 at 333MHz
Modem: Lantiq VRX208
RAM: 32MiB DDR2 at 167MHz
Flash: 8MiB NOR, Spansion S29GL064N90TF04
UART is at JP1:
Pin 1 TX
Pin 2 GND
Pin 3 +3.3V
Pin 4 NC
Pin 5 RX
Boot selection pins are exposed via several resistor jumpers:
boot_sel0 is at J15, on the rear of the board. Default is high.
boot_sel1 is at J3, next to the flash - it is also the flash CE# pin. Default is low.
boot_sel2 is at J12, directly below the SoC. Default is low.
boot_sel3 is at J16, on the rear of the board. Default is low.
The boot_sel pins should never be shorted, the jumper must be moved or
a lower value resistor used to change the pull (existing resistors are 4k7, 1k should work)
To install with the stock bootloader you must break the built in image selection process
which uses at least the following vars: f_upgrade_addr, f_upgrade2_addr, loadaddr, kernel_addr, activeregion, committedregion
This is done by setting loadaddr and both f_upgrade_addr vars to the same address:
VR9 # setenv loadaddr 0xB0040000
VR9 # setenv f_upgrade_addr 0xB0040000
VR9 # setenv f_upgrade2_addr 0xB0040000
VR9 # saveenv
Then flash the firmware image:
VR9 # tftpboot 0x81000000 lede-lantiq-xrx200-ASL56026-squashfs-sysupgrade.bin
VR9 # erase B0040000 +${filesize}
VR9 # cp.b 0x81000000 0xB0040000 ${filesize}
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2017-03-06 23:25:37 +00:00
|
|
|
ASL56026)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
|
|
|
wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
|
|
|
|
|
ucidef_add_switch "switch0"\
|
|
|
|
|
"2:lan" "3:lan" "6t@eth0"
|
|
|
|
|
;;
|
|
|
|
|
|
2016-08-25 20:19:00 +00:00
|
|
|
BTHOMEHUBV2B)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
|
|
|
|
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
|
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
BTHOMEHUBV3A)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_set_interface_lan 'eth0'
|
|
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
BTHOMEHUBV5A)
|
2015-10-03 11:57:54 +00:00
|
|
|
lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
2016-08-25 20:19:00 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-09-10 09:05:56 +00:00
|
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
DGN3500*)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-08-25 20:19:00 +00:00
|
|
|
EASY80920NAND|EASY80920NOR)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
|
|
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
|
|
|
|
;;
|
|
|
|
|
|
2017-03-26 08:53:35 +00:00
|
|
|
FRITZ3370)
|
|
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
|
|
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
FRITZ7320)
|
|
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
|
|
|
|
;;
|
|
|
|
|
|
2016-06-11 13:05:52 +00:00
|
|
|
FRITZ7360SL)
|
2017-03-26 08:53:35 +00:00
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
|
2016-06-11 13:05:52 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
|
2016-06-11 13:05:52 +00:00
|
|
|
;;
|
|
|
|
|
|
2015-12-04 12:32:44 +00:00
|
|
|
H201L)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
P2601HNFX)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
P2812HNUF*)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
2017-03-11 12:23:01 +00:00
|
|
|
"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
TDW8970|TDW8980)
|
2016-08-02 20:27:16 +00:00
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-10-02 09:10:02 +00:00
|
|
|
VG3503J)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
|
|
|
|
wan_mac=$(macaddr_add "$lan_mac" 1)
|
|
|
|
|
ucidef_add_switch "switch0" \
|
|
|
|
|
"2:lan:1" "4:lan:2" "6t@eth0"
|
|
|
|
|
;;
|
|
|
|
|
|
2016-01-18 20:40:03 +00:00
|
|
|
VR200v)
|
2016-08-02 20:27:16 +00:00
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
|
2016-01-18 20:40:03 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-23 05:36:00 +00:00
|
|
|
"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
|
2016-01-18 20:40:03 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-12-01 06:29:49 +00:00
|
|
|
VGV7510KW22*)
|
2016-07-14 16:15:48 +00:00
|
|
|
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-09-10 09:05:56 +00:00
|
|
|
"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-12-01 06:29:49 +00:00
|
|
|
VGV7519*)
|
2016-07-14 16:15:48 +00:00
|
|
|
wan_mac=$(mtd_get_mac_binary board_config 22)
|
2016-05-26 21:08:22 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-09-10 09:05:56 +00:00
|
|
|
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-08-25 20:19:00 +00:00
|
|
|
WBMR)
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_switch "switch0" \
|
2016-08-25 20:19:00 +00:00
|
|
|
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
2015-12-04 12:32:44 +00:00
|
|
|
;;
|
|
|
|
|
|
2016-06-09 14:51:39 +00:00
|
|
|
WBMR300)
|
|
|
|
|
lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
|
|
|
|
|
wan_mac="$lan_mac"
|
|
|
|
|
ucidef_add_switch "switch0" \
|
2016-11-14 19:02:37 +00:00
|
|
|
"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
|
2016-07-28 18:52:55 +00:00
|
|
|
;;
|
|
|
|
|
|
|
|
|
|
*)
|
|
|
|
|
ucidef_set_interface_lan 'eth0'
|
2016-06-09 14:51:39 +00:00
|
|
|
;;
|
|
|
|
|
|
2015-12-04 12:32:44 +00:00
|
|
|
esac
|
|
|
|
|
|
2017-02-17 22:29:46 +00:00
|
|
|
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
|
|
|
|
|
|
2017-02-17 21:04:12 +00:00
|
|
|
if lantiq_is_vdsl_system; then
|
2016-01-01 21:19:32 +00:00
|
|
|
interface_wan="ptm0"
|
2016-03-07 11:03:18 +00:00
|
|
|
ucidef_add_vdsl_modem "$annex" "av" "ptm"
|
2015-12-04 12:32:44 +00:00
|
|
|
else
|
2016-01-01 21:19:32 +00:00
|
|
|
interface_wan="nas0"
|
2015-12-04 12:32:44 +00:00
|
|
|
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
|
|
|
|
fi
|
|
|
|
|
|
2016-01-01 21:19:32 +00:00
|
|
|
ucidef_set_interface_wan "$interface_wan" "pppoe"
|
|
|
|
|
|
2016-09-10 07:46:14 +00:00
|
|
|
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
|
|
|
|
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
2015-12-04 12:32:44 +00:00
|
|
|
|
|
|
|
|
board_config_flush
|
|
|
|
|
|
|
|
|
|
exit 0
|
2016-07-14 16:15:48 +00:00
|
|
|
|