KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

lantiq: fix avm fritz box mac addresses

Browse source 
It has been shown that the Fritz boxes have the correct mac address set
in the wireless calibration data/eeeprom. Use this mac address as base
for the ethernet and xdsl interface increment/decrement the address to
match the values stored in the tffs.

Signed-off-by: Mathias Kresin <dev@kresin.me>
This commit is contained in:
Mathias Kresin 2017-03-26 10:53:35 +02:00
parent 961c0eacea
commit 92a12c434c
5 changed files with 17 additions and 9 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

9
target/linux/lantiq/base-files/etc/board.d/02_network
View file

@ -100,7 +100,16 @@ EASY80920NAND|EASY80920NOR)
"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
;;
FRITZ3370)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2439)" 1)
;;
FRITZ7320)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
;;
FRITZ7360SL)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 2705)" 1)
ucidef_add_switch "switch0" \
"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
;;

7
target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
View file

@ -138,13 +138,8 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "calibration" 61440 0
ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 524
;;
FRITZ3370)
FRITZ3370|FRITZ7320|FRITZ7360SL)
ath9k_eeprom_extract "urlader" 2437 0
ath9k_patch_fw_mac "00:00:00:00:00:00" 2
;;
FRITZ7320|FRITZ7360SL)
ath9k_eeprom_extract "urlader" 2437 0
ath9k_patch_fw_mac_crc "00:00:00:00:00:00" 268
;;
TDW8970|TDW8980)
ath9k_eeprom_extract "boardconfig" 135168 0

5
target/linux/lantiq/dts/FRITZ3370.dts
View file

@ -189,7 +189,7 @@
reg = <4 0>;
spi-max-frequency = <1000000>;
partition@0 {
urlader: partition@0 {
reg = <0x0 0x20000>;
label = "urlader";
read-only;
@ -215,7 +215,8 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
mtd-mac-address = <&urlader 0x987>;
mtd-mac-address-increment = <(-2)>;
lantiq,switch;
ethernet@0 {

2
target/linux/lantiq/dts/FRITZ7320.dts
View file

@ -90,6 +90,8 @@
etop@E180000 {
phy-mode = "mii";
mtd-mac-address = <&ath9k_cal 0xa91>;
mtd-mac-address-increment = <(-2)>;
};
ifxhcd@E101000 {

3
target/linux/lantiq/dts/FRITZ7360SL.dts
View file

@ -155,7 +155,8 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
mac-address = [ 00 11 22 33 44 55 ];
mtd-mac-address = <&urlader 0xa91>;
mtd-mac-address-increment = <(-2)>;
lantiq,switch;
ethernet@0 {