openwrtv3/target/linux/lantiq/dts/FRITZ7320.dts

/dts-v1/;

#include "ar9.dtsi"

#include <dt-bindings/input/input.h>

/ {
	compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9";
	model = "1&1 HomeServer";

	chosen {
		bootargs = "console=ttyLTQ0,115200";
	};

	aliases {
		led-boot = &power;
		led-failsafe = &power;
		led-running = &power;

		led-internet = &info_green;
		led-dsl = &power;
		led-wifi = &wlan;
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};

	fpi@10000000 {
		localbus@0 {
			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x1000000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					ath9k_cal: partition@0 {
						label = "urlader";
						reg = <0x00000 0x20000>;
						read-only;
					};

					partition@20000 {
						label = "firmware";
						reg = <0x20000 0xf60000>;
					};

					partition@f80000 {
						label = "tffs (1)";
						reg = <0xf80000 0x40000>;
						read-only;
					};

					partition@fc0000 {
						label = "tffs (2)";
						reg = <0xfc0000 0x40000>;
						read-only;
					};
				};
			};
		};

		gpio: pinmux@E100B10 {
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			state_default: pinmux {
				pci {
					lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
					lantiq,function = "pci";
				};
				pci-in {
					lantiq,groups = "req1", "req2", "req3", "req4";
					lantiq,output = <0>;
					lantiq,open-drain = <1>;
					lantiq,pull = <2>;
				};
				pci-out {
					lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
					lantiq,output = <1>;
					lantiq,pull = <0>;
				};
			};
		};

		etop@E180000 {
			phy-mode = "mii";
			mtd-mac-address = <&ath9k_cal 0xa91>;
			mtd-mac-address-increment = <(-2)>;
		};

		ifxhcd@E101000 {
			status = "okay";
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		rfkill {
			label = "rfkill";
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RFKILL>;
		};
		dect {
			label = "dect";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_PHONE>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		power: power {
			label = "fritz7320:green:power";
			gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
			default-state = "keep";
		};
		voice {
			label = "fritz7320:green:fon";
			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
		};
		dect {
			label = "fritz7320:green:dect";
			gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
		};
		wlan: wlan {
			label = "fritz7320:green:wlan";
			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
		};
		info_green: info_green {
			label = "fritz7320:green:info";
			gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
		};
		info_red {
			label = "fritz7320:red:info";
			gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
		};
	};
};

&pci0 {
	status = "okay";
	req-mask = <0xf>;
	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;

	wifi@0,0 {
		compatible = "pci0,0";
		reg = <0x7000 0 0 0 0>;
		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
	};
};