openwrtv3/target/linux/brcm47xx/patches-2.6.23/240-extif_fixes.patch

Index: linux-2.6.23/drivers/ssb/driver_mipscore.c
===================================================================
--- linux-2.6.23.orig/drivers/ssb/driver_mipscore.c	2007-10-13 03:01:19.829188047 +0200
+++ linux-2.6.23/drivers/ssb/driver_mipscore.c	2007-10-13 03:01:21.777299062 +0200
@@ -128,10 +128,46 @@
 	ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 }
 
-/* XXX: leave here or move into separate extif driver? */
+static inline bool serial_exists(u8 *regs)
+{
+	u8 save_mcr, status1 = 0;
+
+	if (regs) {
+		save_mcr = regs[UART_MCR];
+		regs[UART_MCR] = (UART_MCR_LOOP | 0x0a);
+		// Fixme UART_MSR_DSR appears in status1
+		status1 = regs[UART_MSR] & 0xd0;
+		regs[UART_MCR] = save_mcr;
+    }
+	return (status1 == (UART_MSR_DCD | UART_MSR_CTS));
+}
+
 static int ssb_extif_serial_init(struct ssb_extif *dev, struct ssb_serial_port *ports)
 {
-	return 0;
+	u32 i, nr_ports = 0;
+
+	/* Disable GPIO interrupt initially */
+	extif_write32(dev, SSB_EXTIF_GPIO_INTPOL, 0);
+	extif_write32(dev, SSB_EXTIF_GPIO_INTMASK, 0);
+
+	for (i = 0; i < 2; i++) {
+		void __iomem *uart_regs;
+
+		uart_regs = ioremap_nocache(SSB_EUART, 16);
+		uart_regs += (i * 8);
+
+		if (serial_exists(uart_regs) && ports) {
+			extif_write32(dev, SSB_EXTIF_GPIO_INTMASK, 2);
+
+			nr_ports++;
+			ports[i].regs = uart_regs;
+			ports[i].irq = 2;
+			ports[i].baud_base = 13500000;
+			ports[i].reg_shift = 0;
+	    }
+		iounmap(uart_regs);
+    }
+	return nr_ports;
 }
 
 
@@ -139,40 +175,6 @@
 {
 	struct ssb_bus *bus = mcore->dev->bus;
 
-	//TODO if (EXTIF available
-#if 0
-		extifregs_t *eir = (extifregs_t *) regs;
-		sbconfig_t *sb;
-
-		/* Determine external UART register base */
-		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-		base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
-
-		/* Determine IRQ */
-		irq = sb_irq(sbh);
-
-		/* Disable GPIO interrupt initially */
-		W_REG(&eir->gpiointpolarity, 0);
-		W_REG(&eir->gpiointmask, 0);
-
-		/* Search for external UARTs */
-		n = 2;
-		for (i = 0; i < 2; i++) {
-			regs = (void *) REG_MAP(base + (i * 8), 8);
-			if (BCMINIT(serial_exists)(regs)) {
-				/* Set GPIO 1 to be the external UART IRQ */
-				W_REG(&eir->gpiointmask, 2);
-				if (add)
-					add(regs, irq, 13500000, 0);
-			}
-		}
-
-		/* Add internal UART if enabled */
-		if (R_REG(&eir->corecontrol) & CC_UE)
-			if (add)
-				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-
-#endif
 	if (bus->extif.dev)
 		mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
 	else if (bus->chipco.dev)
@@ -219,7 +221,7 @@
 	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
 }
 
-static inline void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
                                               u32 *pll_type, u32 *n, u32 *m)
 {
 	*pll_type = SSB_PLLTYPE_1;
Index: linux-2.6.23/drivers/ssb/main.c
===================================================================
--- linux-2.6.23.orig/drivers/ssb/main.c	2007-10-11 19:38:13.198446000 +0200
+++ linux-2.6.23/drivers/ssb/main.c	2007-10-13 03:01:21.785299518 +0200
@@ -774,12 +774,12 @@
 	u32 plltype;
 	u32 clkctl_n, clkctl_m;
 
-	//TODO if EXTIF: PLLTYPE == 1, read n from clockcontrol_n, m from clockcontrol_sb
-
-	if (bus->chipco.dev) {
+	if (bus->extif.dev)
+		ssb_extif_get_clockcontrol(&bus->extif, &plltype, &clkctl_n, &clkctl_m);
+	else if (bus->chipco.dev)
 		ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
 					    &clkctl_n, &clkctl_m);
-	} else
+	else
 		return 0;
 
 	if (bus->chip_id == 0x5365) {
Index: linux-2.6.23/include/linux/ssb/ssb_driver_extif.h
===================================================================
--- linux-2.6.23.orig/include/linux/ssb/ssb_driver_extif.h	2007-10-13 03:01:19.841188731 +0200
+++ linux-2.6.23/include/linux/ssb/ssb_driver_extif.h	2007-10-13 03:01:21.789299747 +0200
@@ -158,6 +158,8 @@
 /* watchdog */
 #define SSB_EXTIF_WATCHDOG_CLK		48000000	/* Hz */
 
+extern void ssb_extif_get_clockcontrol(struct ssb_extif *, u32 *, u32 *, u32 *);
+
 /* GPIO functions */
 static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif,
                                     u32 mask)
Index: linux-2.6.23/include/linux/ssb/ssb_regs.h
===================================================================
--- linux-2.6.23.orig/include/linux/ssb/ssb_regs.h	2007-10-11 19:38:13.206447000 +0200
+++ linux-2.6.23/include/linux/ssb/ssb_regs.h	2007-10-13 03:01:21.793299976 +0200
@@ -24,8 +24,8 @@
 #define SSB_PCI_DMA_SZ		0x40000000	/* Client Mode sb2pcitranslation2 size in bytes */
 #define SSB_PCIE_DMA_L32		0x00000000	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */
 #define SSB_PCIE_DMA_H32		0x80000000	/* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */
-#define	SSB_EUART		(SB_EXTIF_BASE + 0x00800000)
-#define	SSB_LED			(SB_EXTIF_BASE + 0x00900000)
+#define	SSB_EUART		(SSB_EXTIF_BASE + 0x00800000)
+#define	SSB_LED			(SSB_EXTIF_BASE + 0x00900000)
 
 
 /* Enumeration space constants */