KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ramips/base-files/lib/upgrade/platform.sh

314 lines
4.1 KiB
Bash
Raw Normal View History

ramips: add sysupgrade support SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
#
# Copyright (C) 2010 OpenWrt.org
#
. /lib/ramips.sh
PART_NAME=firmware
RAMFS_COPY_DATA=/lib/ramips.sh
platform_check_image() {
local board=$(ramips_board_name)
ramips: use get_magic_long in sysupgrade image check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
local magic="$(get_magic_long "$1")"
ramips: add sysupgrade support SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 40915
2014-06-02 12:43:22 +00:00
[ "$#" -gt 1 ] && return 1
ramips: add sysupgrade support SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
case "$board" in
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
3g150b|\
3g300m|\
a5-v11|\
ramips: add support for Digineo AC1200 Pro This is basically a ZBT-WG3526 (mt7621 SoC), but with 32M flash. Signed-off-by: Dominik Menke <dom@digineo.de>
2016-11-15 11:37:38 +00:00
ac1200pro|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
ai-br100|\
air3gii|\
all0239-3g|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
all0256n-4M|\
all0256n-8M|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
all5002|\
all5003|\
ar725w|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
asl26555-8M|\
asl26555-16M|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
awapn2403|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
awm002-evb-4M|\
awm002-evb-8M|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
awm003-evb|\
bc2|\
broadway|\
carambola|\
cf-wr800n|\
ramips: add support for Planex CS-QR10 CS-QR10 is MT7620A based IP Camera. the camera and sound does not work with kernel 4.4. - camera chip is sn9c291. - sound chip is wm8960. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49234
2016-04-26 11:43:01 +00:00
cs-qr10|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
d105|\
ramips: add support for Sanlinking D240 The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-02-04 20:28:52 +00:00
d240|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
dap-1350|\
ramips: add support for Planex DB-WRT01 This patch add support for Planex DB-WRT01. DANBOARD route on the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio. DANBOARD is Cartoon character. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 46918
2015-09-14 20:08:55 +00:00
db-wrt01|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
dcs-930|\
dcs-930l-b1|\
dir-300-b1|\
dir-300-b7|\
dir-320-b1|\
dir-600-b1|\
dir-615-d|\
dir-615-h1|\
dir-620-a1|\
dir-620-d1|\
dir-810l|\
ramips: add support for DuZun DM06 DuZun DM06 is a develop board based on mt7628 64M RAM, 8M SPI Flash, 1 WAN, 1 LAN. wm8960 codec with line out, line in and speaker output. Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-05-28 14:22:10 +00:00
duzun-dm06|\
ramips: Add device DLINK DWR-512-B The Dlink DWR-512-B modem is a ralink 5350 processor based embedding a 3G mini-pcie router. The oem JBOOT bootloader has to be replaced by a RT5350 SDK U-Boot such as https://github.com/stevenylai/ralink_sdk - U-Boot configured for the RT5350 256MiB SDR. Main reason to change the bootloader is the encrypted header used to store the kernel image. In this way an image can only be generated using the propietary binboy tool (included in the GPL distribution from Dlink). The binboy tool doesn't allow to modify the kernel/rootfs partition scheme. This is considered a big constraint (limited kernel size and inefficient usage of flash space). For interested people I pubblished the details of my investigation about the encrypted firmware header here: http://lists.infradead.org/pipermail/lede-dev/2016-October/003435.html Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2016-11-13 22:36:00 +00:00
dwr-512-b|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
e1700|\
esr-9753|\
ramips: add support for Afoundry EW-1200 This device features both a 2.4 and 5Ghz radio, and supports 802.11a/b/g/n/ac modes. It has 5 Gb-Ethernet ports and a USB 3.0 host port. It is powered by the Mediatek MT7621 SoC, and the MT7602E and MT7612E wifi chipsets, together with 128MB of RAM and 16 MB of SPI Flash. The stock firmware is in fact based on some openwrt barrier breaker, with a mediatek SDK kernel, and an afoundry custom made web interface (not LuCI based). Firmware update page on the stock web interface can not accept sysupgrade images, it bricks the device. At this point, the only working solution I found was to connect to the serial console port (available on J4 header) and to use opkg to install dropbear. Then scp the sysupgrade file in the device's /tmp and run sysupgrade from console without preserving configuration files. Signed-off-by: Francois Goudal <francois@goudal.net>
2017-02-27 20:59:50 +00:00
ew1200|\
ramips: Add support for Netgear EX2700 This patch adds support for the Netgear EX2700 and builds an approriate sysupgrade image. What's missing is the option to build a factory image flashable via the router's stock web interface, but this approach is hindered by the fact that u-boot operforms an additional integrity check, which expects a uImage header in the last 64 bytes of the "kernel" partition, which the bootloader expects to be 960k, a size exceeded by the standard OpenWrt kernel. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> SVN-Revision: 48698
2016-02-12 08:29:33 +00:00
ex2700|\
ramips: add support for Netgear EX3700 Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. Co-authored-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Paul Oranje <por@xs4all.nl> Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2017-03-03 14:36:51 +00:00
ex3700|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
f7c027|\
firewrt|\
fonera20n|\
freestation5|\
ramips: Add support for GL-MT300A This patches adds support for GL-MT300A. GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM, Two LANs, USB, UART and MMC daughter board. SVN-Revision: 48992
2016-03-10 19:11:57 +00:00
gl-mt300a|\
ramips: Add support for GL-MT300N This patch adds support for GL-MT300N. GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM, 2 LANs, USB, UART, GPIO and PoE support. SVN-Revision: 48993
2016-03-10 19:12:04 +00:00
gl-mt300n|\
ramips: Add support for GL-MT750 This patch adds support for GL-MT750. GL-MT750 is powered by MT7620A and MT7610e, dual band 802.11ac, 2.4G 300Mbps and 5G 450Mbps. It has 5 LANs, MMC interface, USB, a lot of IOs and PoE support. SVN-Revision: 48994
2016-03-10 19:12:10 +00:00
gl-mt750|\
ramips: Add base-files for HiWiFi HC5x61 models HiWiFi HC5661/5761/5861 models are manufactured by http://www.hiwifi.com. These models have similar hardware specs(MT7620A + 128M DDR2 + 16M flash). This patch adds support for them. The original author is Justin Liu (rssnsj@gmail.com). I ported the patch to trunk and submitted it here with his approval. v3 fix 1: Fixed model order 2: Remove manufacturer name from model name 3: Use a hacky but prettier way to get mac address. Signed-off-by: Xiaoning Kang <kangxn@163.com> SVN-Revision: 47111
2015-10-05 10:25:47 +00:00
hc5*61|\
ramips: add support for HiWiFi HC5661A HC5661A is almost the same as HC5661 but MT7628AN is used instead of MT7620A. - MT7628AN - 128 MiB DDR2 RAM (W971GG6KB-25) - 16 MiB SPI NOR flash (W25Q128) - SD slot (not work yet) - 1+4 x 100M Ethernet - 802.11 b/g/n Wi-Fi - 3 x LED - 1 x button - UART pad on PCB (JP1: TX, RX, GND, 3.3V) The factory flash layout seems different from HC5661. "hwf_config" is renamed to "oem" and its size changes to 0x20000. It is modified accordingly in the dts file. 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "hw_panic" 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000160000 : "kernel" 0x000000160000-0x000000fc0000 : "rootfs" 0x000000bb0000-0x000000fc0000 : "rootfs_data" 0x000000fc0000-0x000000fe0000 : "oem" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "backup" 0x000000050000-0x000000fc0000 : "firmware" To install LEDE, enabled the "developer mode", which will *void your warranty* and open the SSH server at port 1022. sysupgrade -n -F lede-ramips-mt7628-hc5661a-squashfs-sysupgrade.bin SD slot: - Tried to add modules kmod-sdhci kmod-sdhci-mt7620, and corresponding dts block. - It will block WAN + 3xLAN ports, only one LAN works. - I'm not sure why, everything else works fine. Signed-off-by: Wang JiaWei <buaawjw@gmail.com>
2017-02-24 23:19:15 +00:00
hc5661a|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
hg255d|\
hlk-rm04|\
hpm|\
ht-tm02|\
hw550-3g|\
ip2202|\
ramips: Add JCG routers to base-files This patch adds support for JHR-N805R, JHR-N825R and JHR-N926R to various scripts in the base-files directory. Signed-off-by: Reinhard Max <reinhard@m4x.de> Reviewed-by: Torsten Duwe <duwe@lst.de> SVN-Revision: 48905
2016-03-04 08:33:09 +00:00
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
ramips: add support for ZyXEL Keenetic Omni / Omni II Factory image can be installed via Zyxel WebUI. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2016-11-28 18:41:51 +00:00
kn_rc|\
kn_rf|\
ramips: add support for ZyXEL Keenetic Viva Factory image can be installed via Zyxel WebUI. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com> [removed linux,modalias parameter from flash node in dts] [removed sdhci node from dts; no sd card slot here] Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-29 12:26:58 +00:00
kng_rc|\
ramips: add LinkIt Smart7688 support Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47203
2015-10-19 10:07:38 +00:00
linkits7688|\
linkits7688d|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
m2m|\
m3|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
m4-4M|\
m4-8M|\
ramips: add support for Mercury MAC1200R v2 MT7628AN + MT7612E, 8MB SPI flash, 64MB DDR RAM reset button GPIO is still missing (anyone?) bootloader password is 'slp' Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-09-08 22:57:31 +00:00
mac1200rv2|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
microwrt|\
miniembplug|\
miniembwifi|\
miwifi-mini|\
ramips: Add support for Xiaomi MiWiFi Nano Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com> v3 includes changes suggested by L. D. Pinney & Karl Palsson- Eliminate en25q64 (4MB) flash chip Alphabetization Remove hyphen in model Rename profile from miwifinano.mk to xiaomi.mk Add gpios that are attached to leds SVN-Revision: 49024
2016-03-16 09:26:48 +00:00
miwifi-nano|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
mlw221|\
mlwg2|\
mofi3500-3gn|\
mpr-a1|\
mpr-a2|\
mr-102n|\
ramips: add sysupgrade support for mt7628 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48813
2016-02-28 15:46:27 +00:00
mt7628|\
ramips: fix support Planex MZK-750DHP. fix script for Planex MZK-750DHP. modification of the GPIO definition. add Profile. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49205
2016-04-20 17:19:05 +00:00
mzk-750dhp|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
mzk-dp150n|\
ramips: add support for Planex MZK-EX300NP MZK-EX300NP is MT7620A based wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49235
2016-04-26 11:43:06 +00:00
mzk-ex300np|\
ramips: add support for Planex MZK-EX750NP. add support for Planex MZK-EX750NP. MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 49268
2016-04-29 11:34:56 +00:00
mzk-ex750np|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
mzk-w300nh2|\
ramips: add support for Planex MZK-WDPR. add support for Planex MZK-WDPR. MZK-WDPR(MZK-WDPR-R01) is internet radio tuner. This patch is "network board" in MZK-WDPR. LCD board is non OpenWrt Platform. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> SVN-Revision: 48968
2016-03-08 18:11:59 +00:00
mzk-wdpr|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
nbg-419n|\
ramips: add support for Zyxel NBG-419N2 (WAP3205v2) applied bb-final-ramips-add-zyxel-nbg-419n2.patch from 123serge123, found at https://yadi.sk/d/1ZV0lKJwbTE65; see https://forum.openwrt.org/viewtopic.php?pid=246905#p246905, modified slightly to fit to CC release and to new lede build system: image/rt305x.mk include file is used now changed NBG-419N2.dts format to fit style of other dts files Signed-off-by: Klaus <k-laus@quantentunnel.de>
2016-07-24 15:37:52 +00:00
nbg-419n2|\
ramips : add support for Newifi D1 Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-09-27 06:25:04 +00:00
newifi-d1|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
nixcore-x1-8M|\
nixcore-x1-16M|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
nw718|\
ramips: Added Onion Omega2 and Omega2+ This patch adds support for the Onion Omega2 and Omega2+ (https://onion.io) Specifications: - SoC: MediaTek MT7688AN (580MHz, ramips) - Omega2 - RAM: 64MB DDR - Storage: 16MB NOR SPI flash onboard - Omega2+ - RAM: 128MB DDR - Storage: 32MB NOR SPI flash onboard + microSD slot - Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter - Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port - Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock) - All Docks Provide: - Micro-USB port to provide power to the Omega - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial - USB 2.0 socket connected to Omega - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide: - Omega GPIO breakout - Allows for connection of Omega Expansions: - Ethernet Expansion - Relay Expansion - PWM Expansion - OLED Expansion - Ethernet Expansion - Proto Expansion - Cellular Expansion Signed-off-by: Lazar Demin <lazar@onion.io>
2017-01-09 19:59:56 +00:00
omega2|\
omega2p|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
oy-0001|\
ramips : add support for PandoraBox D1 Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-09-27 06:23:27 +00:00
pbr-d1|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
pbr-m1|\
ramips: Add support for Phicomm PSG1208 This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram. The WPS led is uesd as status_led because the power light can't be controlled with GPIO. It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> SVN-Revision: 48721
2016-02-15 18:45:22 +00:00
psg1208|\
ramips: rename PSG1218 to match label Fix previous commit to be less ambigous: PSG1218 rev.A = 5 ports, external PA, heatsinks PSG1218 rev.B = 4 ports, internal PA, no heatsinks Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-04-21 00:47:44 +00:00
psg1218a|\
psg1218b|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
psr-680w|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
px-4885-4M|\
px-4885-8M|\
ramips: add support for MikroTik hEX v3 (RB750Gr3) The MikroTik hEX v3 (RB750Gr3) is a MT7621AT board which is similar to most MT7621 reference designs, it can be easily supported by this patch; however, the stock RouterBOOT bootloader has to be replaced by a MT7621 SDK U-Boot such as https://github.com/ndoo/RB750Gr3-U-Boot - U-Boot configured for the RB750Gr3 (16MiB SPI flash, 256MiB DDR3 RAM at 1200MHz). RouterBOOT, the stock bootloader, does not initialize the UART and boots silently, making it preferable to replace it with a MT7621 SDK U-Boot with UART (57600 8N1) that supports HTTP, TFTP or serial upload of sysupgrade firmware and U-Boot. Furthermore, RouterOS, the stock firmware, is contained in a proprietary modification of SquashFS without GPL sources; UART is also disabled in stock firmware. The combination of LEDE firmware generated by this PR and MT7621 SDK U-Boot expects the printed MAC address to reside at offset `0xe000` of the factory partition (absolute offset is `0x4e000`); this is similar to the factory MAC address offset for several other MT7621 devices. A 16MiB flash dump suitable for use with flashrom will be provided if/once this patch is accepted and binaries are built by LEDE buildbot. Alternatively, writing the U-Boot to the SPI flash starting at 0x0 offset and booting the board with serial console attached will allow TFTP, HTTP or serial upload of sysupgrade firmware. Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-10-18 20:05:32 +00:00
rb750gr3|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
re6500|\
rp-n53|\
rt5350f-olinuxino|\
rt5350f-olinuxino-evb|\
rt-g32-b1|\
rt-n10-plus|\
rt-n13u|\
rt-n14u|\
rt-n15|\
rt-n56u|\
rut5xx|\
sap-g3200u3|\
ramips: add initial support for SamKnows SK-WB8 Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-05-10 16:17:54 +00:00
sk-wb8|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
sl-r7205|\
tew-691gr|\
tew-692gr|\
ramips: Add support for TEW-714TRU Signed-off-by: Jimmy Zhong <mb300sd@mb300sd.net>
2016-08-03 17:58:01 +00:00
tew-714tru|\
ramips: Add support for Thunder Timecloud Thunder Timecloud is a small NAS with MT7621A. It has 1 USB port and an SD Card slot. There is no wireless cards. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2016-08-10 00:18:32 +00:00
timecloud|\
ramips: add support for Dovado tiny AC Add support for Dovado tiny AC wifi router. Soc: mt7620a ram: 64MB flash: 8MB 1x usb 2.0 two gigabit lan ports 5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip. Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com> SVN-Revision: 47348
2015-11-02 10:17:51 +00:00
tiny-ac|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
ur-326n4g|\
ur-336un|\
v22rw-2x2|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
vocore-8M|\
vocore-16M|\
ramips: add support for VoCore2 This patch adds support for the VoCore VoCore2 and its complementary "ultimate" dock. Specifications: - SoC: MediaTek MT7628AN (580MHz, ramips) - RAM: 128MB DDR2 166MHz - Storage: 16MB NOR SPI flash onboard + microSD slot on dock - Wireless: Built into MT7628AN (mt76) with 1T1R firmware on VoCore2 boards with onboard 1x chip antenna - Ethernet: 1x100M (port0) on dock, 1x100M (port2) on PCB header - Dock hardware: - USB 2.0 socket - MicroSD socket - 100Mbps Ethernet x1 - 3.5mm headphone jack (TRRS) connected to Everest Semi ES8388 I2S DAC/ADC (support WIP) - Micro USB for power and console (UART2) Initial installation: - VoCore2 comes preinstalled with a fork of OpenWrt CC and AP on SSID "VoCore2" - Connect to VoCore2 by Ethernet or Wi-Fi - `ssh root@192.168.1.1` (password is "vocore") - scp/wget/etc. LEDE sysupgrade.bin to VoCore2 - `sysupgrade -n <your image>.bin` (don't keep old config, as the original firmware uses Ralink SDK Wi-Fi drivers and not mt76+mac80211) - after sysupgrade completes, Wi-Fi will be disabled by default so use Ethernet or the micro USB console to configure Wi-Fi again Signed-off-by: Andrew Yong <me@ndoo.sg>
2017-01-08 06:30:10 +00:00
vocore2|\
ramips: add support for Planex VR500. SOC: MT7621A RAM: 256MiB NOR: MX25L51245G Non Wireless Router. Issue: soft reboot problem. SPI Flash do not exit 4byte address mode. Signed-off-by: Yuhei Okawa <tochiro.srchack@gmail.com>
2016-10-10 01:24:42 +00:00
vr500|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
w150m|\
ramips: add support for WeVO W2914NS v2 Signed-off-by: Yong-hyu Ban <perillamint@gentoo.moe>
2016-11-18 11:46:27 +00:00
w2914nsv2|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
w306r-v20|\
w502u|\
ralink: add support for netis WF-2881 netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. this device only works on top of UBI. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs * sysupgrade Tested and not working * failsafe Signed-off-by: YounJae Rho <luxflow@live.com> SVN-Revision: 47619
2015-11-24 18:29:26 +00:00
wf-2881|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
whr-1166d|\
whr-300hp2|\
whr-600d|\
whr-g300n|\
ramips: add Widora-NEO board support The Widora board is similar to the Linkit 7688 but features a larger flash capacity. Signed-off-by: Yuan Chenmang <771992497@qq.com> [Jo-Philipp Wich: Reword commit message, cleanup initial PR] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-28 10:04:17 +00:00
widora-neo|\
ramips: add additional support for MQmaker WiTi board The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 6th submission that adds support for XHCI in the device tree file, along with switching the location of the 2 radio's and addition of the kmod-i2c-mt7621 in the default packages of the profile. Signed-off-by: Sebastian Careba <nitroshift@yahoo.com> SVN-Revision: 47845
2015-12-11 15:04:13 +00:00
witi|\
ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350 This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor. Signed-off-by: Tobias Welz <tw@wiznet.eu> SVN-Revision: 46921
2015-09-14 20:09:31 +00:00
wizfi630a|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wl-330n|\
wl-330n3g|\
wl-341v3|\
wl-351|\
ramips: Add support for Wavlink WL-WN575A3 This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2016-11-06 12:00:38 +00:00
wl-wn575a3|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wli-tx4-ag300n|\
ramips: add support for Sitecom WLR-6000 The Sitecom firmware upgrade file has SENAO_FIRMWARE_TYPE 2 set. This looks rather wrong since SENAO_FIRMWARE_TYPE 2 is kernel only but the file is way to big for only including a kernel. The factory image need to have the dlf file extension. Otherwise the Sitecom firmware rejects the file. The stock firmware uses the following mac addresses: LAN: 00:0C:F6:AA:BB:D8 (u-boot env: ethaddr) 2,4: 00:0C:F6:AA:BB:D8 (EEPROM) 5: 00:0C:F6:AA:BB:DC (EEPROM) WAN: 00:0C:F6:AA:C8:43 (u-boot env: wanaddr) Assuming the mac address range :D8 to :DC is reserved for this device, the MAC addresses were reorder to have a unique MAC address for each interface: 2.4GHz: 00:0C:F6:AA:BB:D8 LAN: 00:0C:F6:AA:BB:D9 WAN: 00:0C:F6:AA:BB:DA 5 GHz: 00:0C:F6:AA:BB:DC The first MAC is assigned to the 2.4GHz WiFi interface to keep compatibility with the SSIDs printed on the case, which have the last three sextets of the MAC address appended. There are still issues with the rt2x00 driver. It is not possible to use both wireless interfaces at the same time. The 2.4 GHz wireless (PCIe) only works if the internal 5GHz wireless is/has been enabled or used for scanning. The internal 5GHz wireless only works if the 2.4GHz wireless (PCIe) was never enabled. Disabling the 2.4Ghz after it was enabled will result in stations seeing the 5Ghz AP but are unable to connect. Due to the not optimal working wifi the manufacture, backup and storage partitions of the OEM firmware are kept for now to allow an easy switch back to the Sitecom firmware. Signed-off-by: Jasper Scholte <NightNL@outlook.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-14 21:30:44 +00:00
wlr-6000|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wmr-300|\
ramips: add support for Netgear WN3000RPv3 This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-01-18 10:34:56 +00:00
wn3000rpv3|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wnce2001|\
ramips: Add support for the Netgear WNDR3700v5 https://wiki.openwrt.org/toh/netgear/wndr3700 wndr3700v5 uses the single-core dual thread MediaTek MT7621S SoC. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 49247
2016-04-26 11:43:53 +00:00
wndr3700v5|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
wr512-3gn-4M|\
wr512-3gn-8M|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wr6202|\
ramips: add support for ELECOM WRH-300CR ELECOM WRH-300CR is MT7620N based very small Wi-Fi router with 64MiB DDR2 SDRAM, 16MiB SPI Flash, one fast ethernet port, and (internal but easy-to-access) UART. it also has internal USB hub and USB card reader which provide one USB port, one SD card slot, and one microSD card slot. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> SVN-Revision: 49211
2016-04-21 19:46:59 +00:00
wrh-300cr|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wrtnode|\
ralink: add WRTnode2 platform and led support Signed-off-by: xzmu <xzmu@wrtnode.com> SVN-Revision: 48049
2016-01-01 21:19:50 +00:00
wrtnode2r |\
wrtnode2p |\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wsr-600|\
ramips: dont replace the board name Use fixed led names and add each board variant instead of manipulating the board name. It makes the ramips board name function less different to the one used in other targets and allows to merge them with a common function. Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-04-07 22:34:48 +00:00
wt1520-4M|\
wt1520-8M|\
wt3020-4M|\
wt3020-8M|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
wzr-agl300nh|\
x5|\
x8|\
y1|\
y1s|\
ramips: add suport for ZBT APE522II The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has 64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with 802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac MT7612E-based 5 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2016-06-23 08:58:08 +00:00
zbt-ape522ii|\
ramips: Add support for ZBT-CPE102 - CPU: MT7620N 580MHz - Flash: 8MB - RAM: 64MB - build-in minipcie slot for modem 3G/4G - one ethernet port 10/100Mbps Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-09-25 19:09:31 +00:00
zbt-cpe102|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
zbt-wa05|\
ramips: add support for Zbtlink ZBT-WE2026 This patch adds support for the Zbtlink ZBT-WE2026. Specification: - SoC: MediaTek MT7620N (580MHz) - RAM: 64 MiB - Flash: 8 MiB SPI - LAN: 4x100M - WAN: 1x100M Installation through bootloader webserver: - With the power unplugged press and hold reset button. - Plug power and hold reset button until LED starts to blink. - Install sysupgrade image using web interface on 192.168.1.1. Signed-off-by: Vaclav Svoboda <svoboda@neng.cz>
2017-03-15 08:37:05 +00:00
zbt-we2026|\
ramips: Added support for ZBT-826 / ZBT-1026 Support for these MT7620-based routers: https://wiki.openwrt.org/toh/zbt/we-826 Based on Oskari’s patches found here: https://dev.openwrt.org/ticket/19996 Signed-off-by: Jamie Stuart <jamie@onebillion.org> SVN-Revision: 48865
2016-03-01 09:17:06 +00:00
zbt-we826|\
ramips: add support for ZBT WG2626 Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47351
2015-11-02 10:18:19 +00:00
zbt-wg2626|\
ramips: Add support for ZBT WG3526 The WG3526 is the follow-up to the 2626 and is mostly the same, with the excaption that the mt7602 has been replaced with the mt7603. The internal wifi setup has also changed slightly. Based on my tests, everything that worked on the 2626 works on the 3526 and with roughly the same performance. v1->v2: * Remove some references to 2626 that I had missed in the dts. v2->v3: * Update patch to match new file structure. * Removed SD driver to be consistent with other MT7621 targets. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> SVN-Revision: 49213
2016-04-21 19:47:08 +00:00
zbt-wg3526|\
ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh Always use "|\" (without spaces) and keep boards in alphabetical order. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46633
2015-08-17 06:01:49 +00:00
zbt-wr8305rt|\
ramips: add support for Youku YK1 Changes since V1: I resend this patch for current trunk.The former V1 patch is for CC branch. Signed-off-by: Shonn Lu <countrysideboy@qq.com> SVN-Revision: 47617
2015-11-24 18:29:02 +00:00
zte-q7|\
youku-yk1)
ramips: use get_magic_long in sysupgrade image check Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33842
2012-10-18 07:23:00 +00:00
[ "$magic" != "27051956" ] && {
ramips: add sysupgrade support SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
echo "Invalid image type."
return 1
}
return 0
;;
ramips: move edimax images to the new build code Images installed via TFTP recovery or the Edimax webinterface of the 3g-6200n(l) are writting with the edimax header to flash. Use only one image type for these boards. The migration to the factory only images need to be done via TFTP recovery. Use the same start address for the 3g-6200n(l) factory images as the stock firmware images. Thanks to Jan Dostrasil for reporting all the issues of the 3g-6200nl and the patient testing of all changes. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-27 05:38:08 +00:00
3g-6200n|\
3g-6200nl|\
br-6475nd)
[ "$magic" != "43535953" ] && {
ramips: fix wsr-1166 sysupgrade support Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43816
2015-01-03 18:31:06 +00:00
echo "Invalid image type."
return 1
}
return 0
;;
ramips: move edimax images to the new build code Images installed via TFTP recovery or the Edimax webinterface of the 3g-6200n(l) are writting with the edimax header to flash. Use only one image type for these boards. The migration to the factory only images need to be done via TFTP recovery. Use the same start address for the 3g-6200n(l) factory images as the stock firmware images. Thanks to Jan Dostrasil for reporting all the issues of the 3g-6200nl and the patient testing of all changes. Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-27 05:38:08 +00:00
ar670w)
[ "$magic" != "6d000080" ] && {
ramips: add support for Airlink101 AR670W This is a RT2880-based board, 32MB RAM, 4MB flash. The bootloader is a hacked u-Boot that reads an LZMA image directly, so we skip generating the uImage header and enable the lzma mtdsplit parser. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 43153
2014-11-03 08:00:13 +00:00
echo "Invalid image type."
return 1
}
return 0
;;
ramips/base-files: Add support for Archer C50 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-06-12 21:43:51 +00:00
c20i|\
ramips: Add support to TP-Link Archer MR200 CPU: MT7620N 580MHz Flash: 8MB RAM: 64MB build-in modem 3G/4G four ethernet port 10/100Mbps Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-09-24 19:41:43 +00:00
c50|\
mr200)
ramips: reorder the sysupgrade script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46660
2015-08-17 06:18:38 +00:00
[ "$magic" != "03000000" ] && {
ramips: add user space support for the DIR-645 Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33844
2012-10-18 07:23:03 +00:00
echo "Invalid image type."
return 1
}
return 0
;;
ramips: reorder the sysupgrade script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46660
2015-08-17 06:18:38 +00:00
cy-swr1100|\
ramips: Add support for D-Link DCH-M225 D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash, 3.5mm audio out support. but no ethernet and usb ports. so you must default enable wifi. Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-05-02 03:57:40 +00:00
dch-m225|\
ramips: reorder the sysupgrade script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46660
2015-08-17 06:18:38 +00:00
dir-610-a1|\
dir-645|\
dir-860l-b1)
[ "$magic" != "5ea3a417" ] && {
ramips: Add userspace support for the Edimax BR-6475nD The rt2x00 wifi driver may still need updating to function with this device. Signed-off-by: Christopher Lais <chris+openwrt@zenthought.org> SVN-Revision: 39298
2014-01-15 18:29:44 +00:00
echo "Invalid image type."
return 1
}
return 0
;;
ramips: add support for Netgear R6220 This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong <hquu@outlook.com>
2017-03-11 07:44:33 +00:00
hc5962|\
r6220)
ramips: add support for HiWiFi HC5962 This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
2017-02-22 12:47:22 +00:00
# these boards use metadata images
return 0
;;
ramips: add support for Buffalo WCR-1166DS Buffalo WCR-1166DS is a small wireless router with - MT7628AN + MT7612E - 64MiB DDR2 SDRAM - 16MiB SPI flash - 2T2R 11ac/a/b/g/n Wi-Fi - 2x 10/100M ethernet switch - 8x programmable LED - 3x button - UART pad on PCB (J2: 3.3V, GND, TX, RX) factory image can be installed via stock web UI. due to the "dual image" function in the bootloader, the second half of the SPI flash ("firmware2" partition) cannot be used as a part of the file system. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
2017-01-28 16:05:56 +00:00
ubnt-erx)
nand_do_platform_check "$board" "$1"
return $?;
;;
wcr-1166ds|\
ramips: reorder the sysupgrade script Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46660
2015-08-17 06:18:38 +00:00
wsr-1166)
[ "$magic" != "48445230" ] && {
ramips: add preliminary Archer C20i support Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 43898
2015-01-09 15:40:51 +00:00
echo "Invalid image type."
return 1
}
return 0
;;
ramips: add sysupgrade support SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
esac
echo "Sysupgrade is not yet supported on $board."
return 1
}
ramips: add support for Ubiquiti EdgeRouter X (UBNT-ERX) This router is based on MT7621 SoC, no wifi, no usb, nand. Works: * Boots. * Ethernet. * Switch. * Button (reset). * Flashing OpenWrt from stock firmware. * Upgrading OpenWrt. Doesn't work: * No GPIO leds. All leds are controlled by switch, but stock firmware was able to control them. * SoC has crypto engine but no open driver. * SoC has nat acceleration, but no open driver. * This router has 2MB spi flash soldered in but MT nand/spi drivers do not support pin sharing, so it is not accessable and disabled. Stock firmware could read it and it was empty. * PoE out. Router has serial pins populated. If looking at the top of the router, then counting from Eth sockets pins go as: 'GND, RX, TX, GND'. 3.3v, 57600. U-boot bootloader supports tftpboot, controlled from serial. This router has two kernel partitions: 'live' and 'backup'. They are swapped during flashing (on both stock and OpenWrt). Active partition is controlled by a flag in a factory partition. U-boot has custom command to switch active kernel partition. Kernel partitions are 'bare flash' 3MB. Stock bootloader has no UBI support. Stock rootfs is UBIFS. Flashing procedure. Stock firmware uses custom kernel patch to mount squashfs from a file that is located on UBIFS volume. This makes wiping out this volume from within stock firmware difficult. Instead this patch builds image that is flashable by stock firmware and contains initrams image (with minimal set of packages to fit into kernel partition). Once this is flashed one can reboot into initramfs OpenWrt and use sysupgrade to flash OpenWrt including rootfs into nand. Note: factory image is only built if initramfs image is enabled. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47881
2015-12-12 07:38:06 +00:00
platform_nand_pre_upgrade() {
local board=$(ramips_board_name)
case "$board" in
ubnt-erx)
platform_upgrade_ubnt_erx "$ARGV"
;;
esac
}
platform_pre_upgrade() {
local board=$(ramips_board_name)
case "$board" in
ramips: add support for HiWiFi HC5962 This patch adds supports for the HiWiFi HC5962(gee4) http://www.hiwifi.com Short specification: - MT7621AT + MT7612EN + 7603EN - 256MB DDR3 RAM - 128MB NAND flash - 1+3 x 1000M Ethernet - 1x USB 2.0 port. 1x USB 3.0 port. - reset button - UART pad on PCB (JP3: TX, RX, GND, 3.3V) Flash instruction: 1, Download lede-ramips-mt7621-hc5962-squashfs-factory.bin 2, Login as root via SSH on 192.168.199.1 and then copy factory.bin(using wget or nc or...) to /tmp/ 3, use the following commands: $ mtd write /tmp/lede-ramips-mt7621-hc5962-squashfs-factory.bin firmware $ mtd erase firmware_backup && reboot After reboot you should be able to login as root via SSH on 192.168.1.1 Signed-off-by: ZengFei Zhang <zhangzengfei@kunteng.org>
2017-02-22 12:47:22 +00:00
hc5962|\
ramips: add support for Netgear R6220 This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong <hquu@outlook.com>
2017-03-11 07:44:33 +00:00
r6220|\
ramips: add support for Ubiquiti EdgeRouter X (UBNT-ERX) This router is based on MT7621 SoC, no wifi, no usb, nand. Works: * Boots. * Ethernet. * Switch. * Button (reset). * Flashing OpenWrt from stock firmware. * Upgrading OpenWrt. Doesn't work: * No GPIO leds. All leds are controlled by switch, but stock firmware was able to control them. * SoC has crypto engine but no open driver. * SoC has nat acceleration, but no open driver. * This router has 2MB spi flash soldered in but MT nand/spi drivers do not support pin sharing, so it is not accessable and disabled. Stock firmware could read it and it was empty. * PoE out. Router has serial pins populated. If looking at the top of the router, then counting from Eth sockets pins go as: 'GND, RX, TX, GND'. 3.3v, 57600. U-boot bootloader supports tftpboot, controlled from serial. This router has two kernel partitions: 'live' and 'backup'. They are swapped during flashing (on both stock and OpenWrt). Active partition is controlled by a flag in a factory partition. U-boot has custom command to switch active kernel partition. Kernel partitions are 'bare flash' 3MB. Stock bootloader has no UBI support. Stock rootfs is UBIFS. Flashing procedure. Stock firmware uses custom kernel patch to mount squashfs from a file that is located on UBIFS volume. This makes wiping out this volume from within stock firmware difficult. Instead this patch builds image that is flashable by stock firmware and contains initrams image (with minimal set of packages to fit into kernel partition). Once this is flashed one can reboot into initramfs OpenWrt and use sysupgrade to flash OpenWrt including rootfs into nand. Note: factory image is only built if initramfs image is enabled. Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com> SVN-Revision: 47881
2015-12-12 07:38:06 +00:00
ubnt-erx)
nand_do_upgrade "$ARGV"
;;
esac
}
ramips: add sysupgrade support SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
platform_do_upgrade() {
local board=$(ramips_board_name)
case "$board" in
*)
default_do_upgrade "$ARGV"
;;
esac
}
ramips: disable watchdog on sysupgrade SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
disable_watchdog() {
killall watchdog
( ps | grep -v 'grep' | grep '/dev/watchdog' ) && {
echo 'Could not disable watchdog'
return 1
}
}
ramips: add feature to blink led on sysupgrade Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47373
2015-11-03 13:32:02 +00:00
blink_led() {
. /etc/diag.sh; set_state upgrade
}
ramips: disable watchdog on sysupgrade SVN-Revision: 27380
2011-07-03 15:01:43 +00:00
append sysupgrade_pre_upgrade disable_watchdog
ramips: add feature to blink led on sysupgrade Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47373
2015-11-03 13:32:02 +00:00
append sysupgrade_pre_upgrade blink_led
Reference in a new issue Copy permalink