ramips: add support for Netgear R6220
This patch adds support for the Netgear R6220, aka Netgear AC1200 and R6220-100NAS. Specification: - SoC: MediaTek MT7621ST (880 MHz) - Falsh: 128 MiB (Macronix MX30LF1G08AA-TI) - RAM: 128 MiB (Nanya NT5CB64M16FP-DH) - Wireless: MediaTek MT7603EN b/g/n , MediaTek MT7612EN an+ac - LAN speed: 10/100/1000 - LAN ports: 4 - WAN speed: 10/100/1000 - WAN ports: 1 - Serial baud rate of Bootloader and factory firmware: 57600 Installation through telnet: - Copy kernel.bin and rootfs.bin to a USB flash disk, plug to usb port on the router. - Enable telnet with link: http://192.168.1.1/setup.cgi?todo=debug (login if required, default: admin password) - You will see "Debug Enabled!" - Telnet 192.168.1.1 and login with "root" - ls /mnt/shares/ to find out path of your USB disk. 'myUdisk' for example. - cd /mnt/shares/myUdisk - mtd_write write rootfs.bin Rootfs - mtd_write write kernel.bin Kernel - reboot nmrpflash can be used to recover to the netgear firmware if a broken image was flashed. Signed-off-by: Hanqing Wong <hquu@outlook.com>
This commit is contained in:
Hanqing Wong
Mathias Kresin
parent
562484f25c
commit
38bee61dab
7 changed files with 190 additions and 1 deletions
|
|
@ -291,6 +291,11 @@ px-4885)
|
|||
set_wifi_led "$board:orange:wifi"
|
||||
set_usb_led "$board:blue:storage"
|
||||
;;
|
||||
r6220)
|
||||
ucidef_set_led_netdev "wan" "wan" "$board:green:wan" eth0.2
|
||||
set_wifi_led "$board:green:wifi"
|
||||
set_usb_led "$board:green:usb"
|
||||
;;
|
||||
re6500)
|
||||
ucidef_set_led_default "power" "power" "$board:white:power" "1"
|
||||
ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
|
||||
|
|
|
|||
|
|
@ -95,6 +95,7 @@ ramips_setup_interfaces()
|
|||
pbr-m1|\
|
||||
psg1208|\
|
||||
psg1218|\
|
||||
r6220|\
|
||||
sap-g3200u3|\
|
||||
sk-wb8|\
|
||||
vr500|\
|
||||
|
|
@ -394,6 +395,10 @@ ramips_setup_macs()
|
|||
lan_mac=$(mtd_get_mac_binary factory 40)
|
||||
wan_mac=$(mtd_get_mac_binary factory 46)
|
||||
;;
|
||||
r6220)
|
||||
wan_mac=$(mtd_get_mac_binary factory 4)
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
;;
|
||||
rt-n56u)
|
||||
lan_mac=$(cat /sys/class/net/eth0/address)
|
||||
lan_mac=$(macaddr_setbit_la "$lan_mac")
|
||||
|
|
|
|||
|
|
@ -33,6 +33,7 @@ get_status_led() {
|
|||
nbg-419n|\
|
||||
nbg-419n2|\
|
||||
pwh2004|\
|
||||
r6220|\
|
||||
vr500|\
|
||||
wnce2001|\
|
||||
wndr3700v5|\
|
||||
|
|
|
|||
|
|
@ -412,6 +412,9 @@ ramips_board_detect() {
|
|||
*"Q7")
|
||||
name="zte-q7"
|
||||
;;
|
||||
*"R6220")
|
||||
name="r6220"
|
||||
;;
|
||||
*"RB750Gr3")
|
||||
name="rb750gr3"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -229,7 +229,8 @@ platform_check_image() {
|
|||
}
|
||||
return 0
|
||||
;;
|
||||
hc5962)
|
||||
hc5962|\
|
||||
r6220)
|
||||
# these boards use metadata images
|
||||
return 0
|
||||
;;
|
||||
|
|
@ -266,6 +267,7 @@ platform_pre_upgrade() {
|
|||
|
||||
case "$board" in
|
||||
hc5962|\
|
||||
r6220|\
|
||||
ubnt-erx)
|
||||
nand_do_upgrade "$ARGV"
|
||||
;;
|
||||
|
|
|
|||
156
target/linux/ramips/dts/R6220.dts
Normal file
156
target/linux/ramips/dts/R6220.dts
Normal file
|
|
@ -0,0 +1,156 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Netgear R6220";
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power {
|
||||
label = "r6220:green:power";
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb {
|
||||
label = "r6220:green:usb";
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
internet {
|
||||
label = "r6220:green:wan";
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "r6220:green:wifi";
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "r6220:green:wps";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
poll-interval = <20>;
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "wifi";
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_export {
|
||||
compatible = "gpio-export";
|
||||
#size-cells = <0>;
|
||||
|
||||
usbpower {
|
||||
gpio-export,name = "usbpower";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "SC PID";
|
||||
reg = <0x100000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x400000>;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "ubi";
|
||||
reg = <0x600000 0x1c00000>;
|
||||
};
|
||||
|
||||
factory: partition@2e00000 {
|
||||
label = "factory";
|
||||
reg = <0x2e00000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@4200000 {
|
||||
label = "reserved";
|
||||
reg = <0x4200000 0x3c00000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
|
||||
pcie0 {
|
||||
mt76@0,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie1 {
|
||||
mt76@1,0 {
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
device_type = "pci";
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
mtd-mac-address = <&factory 0x00000004>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
state_default: pinctrl0 {
|
||||
gpio {
|
||||
ralink,group = "uart3", "jtag";
|
||||
ralink,function = "gpio";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -118,6 +118,23 @@ define Device/pbr-m1
|
|||
endef
|
||||
TARGET_DEVICES += pbr-m1
|
||||
|
||||
define Device/r6220
|
||||
DTS := R6220
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 4096k
|
||||
KERNEL := $(KERNEL_DTB) | uImage lzma
|
||||
IMAGE_SIZE := 28672k
|
||||
UBINIZE_OPTS := -E 5
|
||||
IMAGES := sysupgrade.tar kernel.bin rootfs.bin
|
||||
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
||||
IMAGE/kernel.bin := append-kernel
|
||||
IMAGE/rootfs.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
||||
DEVICE_TITLE := Netgear R6220
|
||||
DEVICE_PACKAGES := kmod-usb2 kmod-mt76
|
||||
endef
|
||||
TARGET_DEVICES += r6220
|
||||
|
||||
define Device/rb750gr3
|
||||
DTS := RB750Gr3
|
||||
IMAGE_SIZE := $(ralink_default_fw_size_16M)
|
||||
|
|
|
|||
Loading…
Reference in a new issue