openwrtv3/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbpcmcia.h

186 lines
6.1 KiB
C
Raw Normal View History

/*
* BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
*
* Copyright 2007, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id$
*/
#ifndef _SBPCMCIA_H
#define _SBPCMCIA_H
/* All the addresses that are offsets in attribute space are divided
* by two to account for the fact that odd bytes are invalid in
* attribute space and our read/write routines make the space appear
* as if they didn't exist. Still we want to show the original numbers
* as documented in the hnd_pcmcia core manual.
*/
/* PCMCIA Function Configuration Registers */
#define PCMCIA_FCR (0x700 / 2)
#define FCR0_OFF 0
#define FCR1_OFF (0x40 / 2)
#define FCR2_OFF (0x80 / 2)
#define FCR3_OFF (0xc0 / 2)
#define PCMCIA_FCR0 (0x700 / 2)
#define PCMCIA_FCR1 (0x740 / 2)
#define PCMCIA_FCR2 (0x780 / 2)
#define PCMCIA_FCR3 (0x7c0 / 2)
/* Standard PCMCIA FCR registers */
#define PCMCIA_COR 0
#define COR_RST 0x80
#define COR_LEV 0x40
#define COR_IRQEN 0x04
#define COR_BLREN 0x01
#define COR_FUNEN 0x01
#define PCICIA_FCSR (2 / 2)
#define PCICIA_PRR (4 / 2)
#define PCICIA_SCR (6 / 2)
#define PCICIA_ESR (8 / 2)
#define PCM_MEMOFF 0x0000
#define F0_MEMOFF 0x1000
#define F1_MEMOFF 0x2000
#define F2_MEMOFF 0x3000
#define F3_MEMOFF 0x4000
/* Memory base in the function fcr's */
#define MEM_ADDR0 (0x728 / 2)
#define MEM_ADDR1 (0x72a / 2)
#define MEM_ADDR2 (0x72c / 2)
/* PCMCIA base plus Srom access in fcr0: */
#define PCMCIA_ADDR0 (0x072e / 2)
#define PCMCIA_ADDR1 (0x0730 / 2)
#define PCMCIA_ADDR2 (0x0732 / 2)
#define MEM_SEG (0x0734 / 2)
#define SROM_CS (0x0736 / 2)
#define SROM_DATAL (0x0738 / 2)
#define SROM_DATAH (0x073a / 2)
#define SROM_ADDRL (0x073c / 2)
#define SROM_ADDRH (0x073e / 2)
#define SROM_INFO2 (0x0772 / 2) /* Corerev >= 2 && <= 5 */
#define SROM_INFO (0x07be / 2) /* Corerev >= 6 */
/* Values for srom_cs: */
#define SROM_IDLE 0
#define SROM_WRITE 1
#define SROM_READ 2
#define SROM_WEN 4
#define SROM_WDS 7
#define SROM_DONE 8
/* Fields in srom_info: */
#define SRI_SZ_MASK 0x03
#define SRI_BLANK 0x04
#define SRI_OTP 0x80
/* CIS stuff */
/* The CIS stops where the FCRs start */
#define CIS_SIZE PCMCIA_FCR
/* CIS tuple length field max */
#define CIS_TUPLE_LEN_MAX 0xff
/* Standard tuples we know about */
#define CISTPL_VERS_1 0x15 /* CIS ver, manf, dev & ver strings */
#define CISTPL_MANFID 0x20 /* Manufacturer and device id */
#define CISTPL_FUNCID 0x21 /* Function identification */
#define CISTPL_FUNCE 0x22 /* Function extensions */
#define CISTPL_CFTABLE 0x1b /* Config table entry */
#define CISTPL_END 0xff /* End of the CIS tuple chain */
/* Function identifier provides context for the function extentions tuple */
/* Function extensions for LANs */
#define LAN_TECH 1 /* Technology type */
#define LAN_SPEED 2 /* Raw bit rate */
#define LAN_MEDIA 3 /* Transmission media */
#define LAN_NID 4 /* Node identification (aka MAC addr) */
#define LAN_CONN 5 /* Connector standard */
/* CFTable */
#define CFTABLE_REGWIN_2K 0x08 /* 2k reg windows size */
#define CFTABLE_REGWIN_4K 0x10 /* 4k reg windows size */
#define CFTABLE_REGWIN_8K 0x20 /* 8k reg windows size */
/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
* take one for HNBU, and use "extensions" (a la FUNCE) within it.
*/
#define CISTPL_BRCM_HNBU 0x80
/* Subtypes of BRCM_HNBU: */
#define HNBU_SROMREV 0x00 /* A byte with sromrev, 1 if not present */
#define HNBU_CHIPID 0x01 /* Two 16bit values: PCI vendor & device id */
#define HNBU_BOARDREV 0x02 /* One byte board revision */
#define HNBU_PAPARMS 0x03 /* PA parameters: 8 (sromrev == 1)
* or 9 (sromrev > 1) bytes
*/
#define HNBU_OEM 0x04 /* Eight bytes OEM data (sromrev == 1) */
#define HNBU_CC 0x05 /* Default country code (sromrev == 1) */
#define HNBU_AA 0x06 /* Antennas available */
#define HNBU_AG 0x07 /* Antenna gain */
#define HNBU_BOARDFLAGS 0x08 /* board flags (2 or 4 bytes) */
#define HNBU_LEDS 0x09 /* LED set */
#define HNBU_CCODE 0x0a /* Country code (2 bytes ascii + 1 byte cctl)
* in rev 2
*/
#define HNBU_CCKPO 0x0b /* 2 byte cck power offsets in rev 3 */
#define HNBU_OFDMPO 0x0c /* 4 byte 11g ofdm power offsets in rev 3 */
#define HNBU_GPIOTIMER 0x0d /* 2 bytes with on/off values in rev 3 */
#define HNBU_PAPARMS5G 0x0e /* 5G PA params */
#define HNBU_ANT5G 0x0f /* 4328 5G antennas available/gain */
#define HNBU_RDLID 0x10 /* 2 byte USB remote downloader (RDL) product Id */
#define HNBU_RSSISMBXA2G 0x11 /* 4328 2G RSSI mid pt sel & board switch arch,
* 2 bytes, rev 3.
*/
#define HNBU_RSSISMBXA5G 0x12 /* 4328 5G RSSI mid pt sel & board switch arch,
* 2 bytes, rev 3.
*/
#define HNBU_XTALFREQ 0x13 /* 4 byte Crystal frequency in kilohertz */
#define HNBU_TRI2G 0x14 /* 4328 2G TR isolation, 1 byte */
#define HNBU_TRI5G 0x15 /* 4328 5G TR isolation, 3 bytes */
#define HNBU_RXPO2G 0x16 /* 4328 2G RX power offset, 1 byte */
#define HNBU_RXPO5G 0x17 /* 4328 5G RX power offset, 1 byte */
#define HNBU_BOARDNUM 0x18 /* board serial number, independent of mac addr */
#define HNBU_MACADDR 0x19 /* mac addr override for the standard CIS LAN_NID */
#define HNBU_RDLSN 0x1a /* 2 bytes; serial # advertised in USB descriptor */
#define HNBU_BOARDTYPE 0x1b /* 2 bytes; boardtype */
#define HNBU_RDLRNDIS 0x20 /* 1 byte; 1 = RDL advertises RNDIS config */
#define HNBU_RDLRWU 0x30 /* 1 byte; 1 = RDL advertises Remote Wake-up */
#define HNBU_SROM3SWRGN 0x80 /* 78 bytes; srom rev 3 s/w region without crc8
* plus extra info appended.
*/
/* sbtmstatelow */
#define SBTML_INT_ACK 0x40000 /* ack the sb interrupt */
#define SBTML_INT_EN 0x20000 /* enable sb interrupt */
/* sbtmstatehigh */
#define SBTMH_INT_STATUS 0x40000 /* sb interrupt status */
#endif /* _SBPCMCIA_H */