using the MONERO_LOG_FORMAT environment variable.
Default is:
%datetime{%Y-%M-%d %H:%m:%s.%g}\t%thread\t%level\t%logger\t%loc\t%msg
Field list in easylogging++ documentation.
Don't forget to escape as needed.
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
5783dd8c tests: add unit tests for uri parsing (moneromooo-monero)
82ba2108 wallet: add API and RPC to create/parse monero: URIs (moneromooo-monero)
d9001b43 epee: add functions to convert from URL format (ie, %XX values) (moneromooo-monero)
When receiving an answer packet, the command code was passed
to the callback instead of the error code. This was hiding
the "command not found" failure from the peer, and in turn
causing the code to attempt to deserialize a non existent
reply string.
48b57d8 monero.supp: valgrind suppressions file (moneromooo-monero)
ffd8c41 ringct: check the size of amount_keys is the same as destinations (moneromooo-monero)
836669d ringct: always shutdown the boost io service (moneromooo-monero)
This is intended to catch traffic coming from a web browser,
so we avoid issues with a web page sending a transfer RPC to
the wallet. Requiring a particular user agent can act as a
simple password scheme, while we wait for 0MQ and proper
authentication to be merged.
Support building internal libraries as shared. This reduces
development time by eliminating the need to re-link all
binaries every time non-interface code in the library changes.
Instead, can hack on libxyz, then `make libxyz`, and re-run
monerod.
By default BUILD_SHARED_LIBS is OFF in release build type,
and ON in debug build type, but can be overriden with -D.
This adds [snap](https://snapcraft.io) packaging to the project. See the
link for more information on snaps. Snap packages install on all Linux
distributions. On Ubuntu, snap confinement with apparmor and seccomp
provide an additional layer of security.
This snap sets up monerod as a systemd service, which should start
immediately on install. To access the wallet CLI, simply run `monero`
(/snap/bin/monero). I think it's a really quick & easy way to get
started with monero.
I've made some opinionated decisions in the packaging just to kick this
off, but I'm happy to iterate on this stuff.
The noexcept specs were added to make GCC 6.1.1 happy (#846), but this
one was missing (because GCC did not complain about it on Linux, but
does complain on OSX).
5dc09f2 wallet_rpc_server: fix some string values being returned between <> (moneromooo-monero)
f8213c0 Require 64/16 characters for payment ids (moneromooo-monero)
The default behavior for hex string parsing would allow the
last digit to be made from a single hexadecimal character,
which is correct, but we typically do not want that as it
gets confusing and easy to not spot wrong input size.
The destructors get a noexcept(true) spec by default, but these
destructors in fact throw exceptions. An alternative fix might be to not
throw (most if not all of these throws are non-essential
error-reporting/logging).
1c0bffb Restrict also 'get_connections' and 'getbans' APIs. (osensei)
9f8bc49 Don't allow 'flush_txpool' and 'setbans' JSON_RPC methods when running in restricted mode. (osensei)
When the send queue limit is reached, it is likely to not drain
any time soon. If we call close on the connection, it will stay
alive, waiting for the queue to drain before actually closing,
and will hit that check again and again. Since the queue size
limit is the reason we're closing in the first place, we call
shutdown directly.
If we reach the send queue size limit, we need to release the lock,
or we will deadlock and it will never drain.
If we reach that limit, it's likely there's another problem in the
first place though, so it will probably not drain in practice either,
unless some kind of transient network timeout.
Since connections from the ::connect method are now kept in
a deque to be able to cancel them on exit, this leaks both
memory and a file descriptor. Here, we clean those up after
30 seconds, to avoid this. 30 seconds is higher then the
5 second timeout used in the async code, so this should be
safe. However, this is an assumption which would break if
that async code was to start relying on longer timeouts.
When the boost ioservice is stopped, pending work notifications
will not happen. This includes deadline timers, which would
otherwise time out the now cancelled I/O operations. When this
happens just after starting a new connect operation, this can
leave that operations in a state where it won't receive either
the completion notification nor a timeout, causing a hang.
This is fixed by keeping a list of connections corresponding
to the connect operations, and cancelling them before stopping
the boost ioservice.
Note that the list of these connections can grow unbounded, as
they're never cleaned up. Cleaning them up would involve
working out which connections do not have any pending work,
and it's not quite clear yet how to go about this.
This prevents an exception from existing the loop without
calling the exit handler, if one is defined.
The daemon defines one, which stops the p2p layer, and will
only exit once the p2p layer is shut down. This would cause
a hang upon an exception, as the input thread would have
exited and the daemon would wait forever with no console
user input.
The daemon will be polled every 90 seconds for new blocks.
It is enabled by default, and can be turned on/off with
set auto-refresh 1 and set auto-refresh 0 in the wallet.
The daemon registers a custom exit command, which cause the
loop to stop. Catch this case before printing "Failed to read line"
as this is an expected case.
If process path name isn't found, then leave log file name blank.
This also applies if a process name is found, but it's blank after
removing a trailing dot extension.
It uses the async console handler differently than simplewallet,
and wasn't running the same exit code, causing it to never actually
exit after breaking out of the console entry loop.
Add fix for compile error with multiple uses of peerid_type (uint64_t)
variable in lambda expression.
- known GCC issue: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65843
epee: replace return value of nullptr for expected boolean with false.
Fixes#231.
Daemon interactive mode is now working again.
RPC mapped calls in daemon and wallet have both had connection_context
removed as an argument as that argument was not being used anywhere.
