rottenwheel/monero
1
0
Fork 0
mirror of https://codeberg.org/anoncontributorxmr/monero.git synced 2024-11-26 17:32:33 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Include additional instructions for Jessie

Browse source 
Raspbian Jessie users must compile boost themselves.
This commit is contained in:
Mike C 2017-09-26 13:00:21 -06:00 committed by GitHub
parent 7cdb343184
commit e914153ff5
1 changed files with 33 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

34
README.md
View file

@ -211,7 +211,7 @@ invokes cmake commands as needed.
#### On the Raspberry Pi
Tested on a Raspberry Pi Zero with a clean install of minimal Debian Stretch (2017-09-07 or later) from https://www.raspberrypi.org/downloads/raspbian/
Tested on a Raspberry Pi Zero with a clean install of minimal Raspbian Stretch (2017-09-07 or later) from https://www.raspberrypi.org/downloads/raspbian/. If you are using Raspian Jessie, [please see note in the following section](#note-for-raspbian-jessie-users).
* `apt-get update && apt-get upgrade` to install all of the latest software
@ -244,6 +244,38 @@ Tested on a Raspberry Pi Zero with a clean install of minimal Debian Stretch (20
* You may wish to reduce the size of the swap file after the build has finished, and delete the boost directory from your home directory
#### *Note for Raspbian Jessie Users:*
If you are using the older Raspbian Jessie image, compiling Monero is a bit more complicated. The version of Boost available in the Debian Jessie repositories is too old to use with Monero, and thus you must compile a newer version yourself. The following explains the extra steps, and has been tested on a Raspberry Pi 2 with a clean install of minimal Raspbian Jessie.
* As before, `apt-get update && apt-get upgrade` to install all of the latest software, and increase the system swap size
```
sudo /etc/init.d/dphys-swapfile stop
sudo nano /etc/dphys-swapfile
CONF_SWAPSIZE=1024
sudo /etc/init.d/dphys-swapfile start
```
* Then, install the dependencies for Monero except `libunwind` and `libboost-all-dev`
* Install the latest version of boost (this may first require invoking `apt-get remove --purge libboost*` to remove a previous version if you're not using a clean install):
```
cd
wget https://sourceforge.net/projects/boost/files/boost/1.64.0/boost_1_64_0.tar.bz2
tar xvfo boost_1_64_0.tar.bz2
cd boost_1_64_0
./bootstrap.sh
sudo ./b2
```
* Wait ~8 hours
```
sudo ./bjam install
```
* Wait ~4 hours
* From here, follow the [general Raspberry Pi instructions](#on-the-raspberry-pi) from the "Clone monero and checkout most recent release version" step.
#### On Windows:
Binaries for Windows are built on Windows using the MinGW toolchain within