mirror of
https://github.com/nqrduck/quackseq.git
synced 2024-11-23 22:32:27 +00:00
Working simulation.
This commit is contained in:
parent
70266387e2
commit
f4ac146611
8 changed files with 771 additions and 20 deletions
17
src/quackseq/spectrometer/simulator.py
Normal file
17
src/quackseq/spectrometer/simulator.py
Normal file
|
@ -0,0 +1,17 @@
|
|||
from quackseq.spectrometer.spectrometer import Spectrometer
|
||||
|
||||
from .simulator_model import SimulatorModel
|
||||
from .simulator_controller import SimulatorController
|
||||
|
||||
class Simulator(Spectrometer):
|
||||
|
||||
def __init__(self):
|
||||
self.model = SimulatorModel()
|
||||
self.controller = SimulatorController(self.model)
|
||||
|
||||
def run_sequence(self, sequence):
|
||||
result =self.controller.run_sequence(sequence)
|
||||
return result
|
||||
|
||||
def set_averages(self, value: int):
|
||||
self.model.average = value
|
354
src/quackseq/spectrometer/simulator_controller.py
Normal file
354
src/quackseq/spectrometer/simulator_controller.py
Normal file
|
@ -0,0 +1,354 @@
|
|||
"""The controller module for the simulator spectrometer."""
|
||||
|
||||
import logging
|
||||
from datetime import datetime
|
||||
import numpy as np
|
||||
|
||||
from quackseq.spectrometer.spectrometer_controller import SpectrometerController
|
||||
from quackseq.measurement import Measurement
|
||||
from quackseq.pulseparameters import TXPulse, RXReadout
|
||||
from quackseq.pulsesequence import QuackSequence
|
||||
|
||||
from nqr_blochsimulator.classes.pulse import PulseArray
|
||||
from nqr_blochsimulator.classes.sample import Sample
|
||||
from nqr_blochsimulator.classes.simulation import Simulation
|
||||
|
||||
logger = logging.getLogger(__name__)
|
||||
|
||||
|
||||
class SimulatorController(SpectrometerController):
|
||||
"""The controller class for the nqrduck simulator module."""
|
||||
|
||||
def __init__(self, model):
|
||||
"""Initializes the SimulatorController."""
|
||||
super().__init__()
|
||||
self.model = model
|
||||
|
||||
def run_sequence(self, sequence: QuackSequence) -> None:
|
||||
"""This method is called when the start_measurement signal is received from the core.
|
||||
|
||||
It will becalled if the simulator is the active spectrometer.
|
||||
This will start the simulation based on the settings and the pulse sequence.
|
||||
"""
|
||||
logger.debug("Starting simulation")
|
||||
sample = self.get_sample_from_settings()
|
||||
logger.debug("Sample: %s", sample.name)
|
||||
|
||||
dwell_time = self.calculate_dwelltime(sequence)
|
||||
logger.debug("Dwell time: %s", dwell_time)
|
||||
|
||||
try:
|
||||
pulse_array = self.translate_pulse_sequence(sequence, dwell_time)
|
||||
except AttributeError:
|
||||
logger.warning("Could not translate pulse sequence")
|
||||
return
|
||||
|
||||
simulation = self.get_simulation(sample, pulse_array)
|
||||
|
||||
result = simulation.simulate()
|
||||
|
||||
tdx = (
|
||||
np.linspace(0, float(self.calculate_simulation_length(sequence)), len(result)) * 1e6
|
||||
)
|
||||
|
||||
rx_begin, rx_stop = self.translate_rx_event(sequence)
|
||||
# If we have a RX event, we need to cut the result to the RX event
|
||||
if rx_begin and rx_stop:
|
||||
evidx = np.where((tdx > rx_begin) & (tdx < rx_stop))[0]
|
||||
tdx = tdx[evidx]
|
||||
result = result[evidx]
|
||||
|
||||
# Measurement name date + module + target frequency + averages + sequence name
|
||||
name = f"{datetime.now().strftime('%Y-%m-%d %H:%M:%S')} - Simulator - {self.model.target_frequency / 1e6} MHz - {self.model.averages} averages - {sequence.name}"
|
||||
logger.debug(f"Measurement name: {name}")
|
||||
|
||||
measurement_data = Measurement(
|
||||
name,
|
||||
tdx,
|
||||
result / simulation.averages,
|
||||
sample.resonant_frequency,
|
||||
# frequency_shift=self.module.model.if_frequency,
|
||||
)
|
||||
|
||||
return measurement_data
|
||||
|
||||
def get_sample_from_settings(self) -> Sample:
|
||||
"""This method creates a sample object based on the settings in the model.
|
||||
|
||||
Returns:
|
||||
Sample: The sample object created from the settings.
|
||||
"""
|
||||
model = self.model
|
||||
atom_density = None
|
||||
sample_volume = None
|
||||
sample_length = None
|
||||
sample_diameter = None
|
||||
|
||||
for samplesetting in model.settings[self.model.SAMPLE]:
|
||||
logger.debug("Sample setting: %s", samplesetting.name)
|
||||
|
||||
if samplesetting.name == model.NAME:
|
||||
name = samplesetting.value
|
||||
elif samplesetting.name == model.DENSITY:
|
||||
density = float(samplesetting.value)
|
||||
elif samplesetting.name == model.MOLAR_MASS:
|
||||
molar_mass = float(samplesetting.value)
|
||||
elif samplesetting.name == model.RESONANT_FREQUENCY:
|
||||
resonant_frequency = float(samplesetting.value)
|
||||
elif samplesetting.name == model.GAMMA:
|
||||
gamma = float(samplesetting.value)
|
||||
elif samplesetting.name == model.NUCLEAR_SPIN:
|
||||
nuclear_spin = float(samplesetting.value)
|
||||
elif samplesetting.name == model.SPIN_FACTOR:
|
||||
spin_factor = float(samplesetting.value)
|
||||
elif samplesetting.name == model.POWDER_FACTOR:
|
||||
powder_factor = float(samplesetting.value)
|
||||
elif samplesetting.name == model.FILLING_FACTOR:
|
||||
filling_factor = float(samplesetting.value)
|
||||
elif samplesetting.name == model.T1:
|
||||
T1 = float(samplesetting.value)
|
||||
elif samplesetting.name == model.T2:
|
||||
T2 = float(samplesetting.value)
|
||||
elif samplesetting.name == model.T2_STAR:
|
||||
T2_star = float(samplesetting.value)
|
||||
elif samplesetting.name == model.ATOM_DENSITY:
|
||||
atom_density = float(samplesetting.value)
|
||||
elif samplesetting.name == model.SAMPLE_VOLUME:
|
||||
sample_volume = float(samplesetting.value)
|
||||
elif samplesetting.name == model.SAMPLE_LENGTH:
|
||||
sample_length = float(samplesetting.value)
|
||||
elif samplesetting.name == model.SAMPLE_DIAMETER:
|
||||
sample_diameter = float(samplesetting.value)
|
||||
else:
|
||||
logger.warning("Unknown sample setting: %s", samplesetting.name)
|
||||
self.module.nqrduck_signal.emit(
|
||||
"notification",
|
||||
["Error", "Unknown sample setting: " + samplesetting.name],
|
||||
)
|
||||
return None
|
||||
|
||||
sample = Sample(
|
||||
name=name,
|
||||
density=density,
|
||||
molar_mass=molar_mass,
|
||||
resonant_frequency=resonant_frequency,
|
||||
gamma=gamma,
|
||||
nuclear_spin=nuclear_spin,
|
||||
spin_factor=spin_factor,
|
||||
powder_factor=powder_factor,
|
||||
filling_factor=filling_factor,
|
||||
T1=T1,
|
||||
T2=T2,
|
||||
T2_star=T2_star,
|
||||
atom_density=atom_density,
|
||||
sample_volume=sample_volume,
|
||||
sample_length=sample_length,
|
||||
sample_diameter=sample_diameter,
|
||||
)
|
||||
return sample
|
||||
|
||||
def translate_pulse_sequence(self, sequence : QuackSequence, dwell_time: float) -> PulseArray:
|
||||
"""This method translates the pulse sequence from the core to a PulseArray object needed for the simulation.
|
||||
|
||||
Args:
|
||||
sequence (QuackSequence): The pulse sequence from the core.
|
||||
dwell_time (float): The dwell time in seconds.
|
||||
|
||||
Returns:
|
||||
PulseArray: The pulse sequence translated to a PulseArray object.
|
||||
"""
|
||||
events = sequence.events
|
||||
|
||||
amplitude_array = list()
|
||||
for event in events:
|
||||
logger.debug("Event %s has parameters: %s", event.name, event.parameters)
|
||||
for parameter in event.parameters.values():
|
||||
logger.debug(
|
||||
"Parameter %s has options: %s", parameter.name, parameter.options
|
||||
)
|
||||
|
||||
if (
|
||||
parameter.name == sequence.TX_PULSE
|
||||
and parameter.get_option_by_name(TXPulse.RELATIVE_AMPLITUDE).value
|
||||
> 0
|
||||
):
|
||||
logger.debug(f"Adding pulse: {event.duration} s")
|
||||
# If we have a pulse, we need to add it to the pulse array
|
||||
pulse_shape = parameter.get_option_by_name(
|
||||
TXPulse.TX_PULSE_SHAPE
|
||||
).value
|
||||
pulse_amplitude = abs(
|
||||
pulse_shape.get_pulse_amplitude(
|
||||
event.duration, resolution=dwell_time
|
||||
)
|
||||
)
|
||||
|
||||
amplitude_array.append(pulse_amplitude)
|
||||
elif (
|
||||
parameter.name == sequence.TX_PULSE
|
||||
and parameter.get_option_by_name(TXPulse.RELATIVE_AMPLITUDE).value
|
||||
== 0
|
||||
):
|
||||
# If we have a wait, we need to add it to the pulse array
|
||||
amplitude_array.append(np.zeros(int(event.duration / dwell_time)))
|
||||
|
||||
amplitude_array = np.concatenate(amplitude_array)
|
||||
|
||||
# This has not yet been implemented right now the phase is always 0
|
||||
phase_array = np.zeros(len(amplitude_array))
|
||||
|
||||
pulse_array = PulseArray(
|
||||
pulseamplitude=amplitude_array,
|
||||
pulsephase=phase_array,
|
||||
dwell_time=float(dwell_time),
|
||||
)
|
||||
|
||||
return pulse_array
|
||||
|
||||
def get_simulation(self, sample: Sample, pulse_array: PulseArray) -> Simulation:
|
||||
"""This method creates a simulation object based on the settings and the pulse sequence.
|
||||
|
||||
Args:
|
||||
sample (Sample): The sample object created from the settings.
|
||||
pulse_array (PulseArray): The pulse sequence translated to a PulseArray object.
|
||||
|
||||
Returns:
|
||||
Simulation: The simulation object created from the settings and the pulse sequence.
|
||||
"""
|
||||
model = self.model
|
||||
|
||||
# noise = float(model.get_setting_by_name(model.NOISE).value)
|
||||
simulation = Simulation(
|
||||
sample=sample,
|
||||
pulse=pulse_array,
|
||||
number_isochromats=int(
|
||||
model.get_setting_by_name(model.NUMBER_ISOCHROMATS).value
|
||||
),
|
||||
initial_magnetization=float(
|
||||
model.get_setting_by_name(model.INITIAL_MAGNETIZATION).value
|
||||
),
|
||||
gradient=float(model.get_setting_by_name(model.GRADIENT).value),
|
||||
noise=float(model.get_setting_by_name(model.NOISE).value),
|
||||
length_coil=float(model.get_setting_by_name(model.LENGTH_COIL).value),
|
||||
diameter_coil=float(model.get_setting_by_name(model.DIAMETER_COIL).value),
|
||||
number_turns=float(model.get_setting_by_name(model.NUMBER_TURNS).value),
|
||||
q_factor_transmit=float(
|
||||
model.get_setting_by_name(model.Q_FACTOR_TRANSMIT).value
|
||||
),
|
||||
q_factor_receive=float(
|
||||
model.get_setting_by_name(model.Q_FACTOR_RECEIVE).value
|
||||
),
|
||||
power_amplifier_power=float(
|
||||
model.get_setting_by_name(model.POWER_AMPLIFIER_POWER).value
|
||||
),
|
||||
gain=float(model.get_setting_by_name(model.GAIN).value),
|
||||
temperature=float(model.get_setting_by_name(model.TEMPERATURE).value),
|
||||
averages=int(model.averages),
|
||||
loss_TX=float(model.get_setting_by_name(model.LOSS_TX).value),
|
||||
loss_RX=float(model.get_setting_by_name(model.LOSS_RX).value),
|
||||
conversion_factor=float(
|
||||
model.get_setting_by_name(model.CONVERSION_FACTOR).value
|
||||
),
|
||||
)
|
||||
return simulation
|
||||
|
||||
def calculate_dwelltime(self, sequence : QuackSequence) -> float:
|
||||
"""This method calculates the dwell time based on the settings and the pulse sequence.
|
||||
|
||||
Returns:
|
||||
float: The dwell time in seconds.
|
||||
"""
|
||||
n_points = int(
|
||||
self.model.get_setting_by_name(self.model.NUMBER_POINTS).value
|
||||
)
|
||||
simulation_length = self.calculate_simulation_length(sequence)
|
||||
dwell_time = simulation_length / n_points
|
||||
return dwell_time
|
||||
|
||||
def calculate_simulation_length(self, sequence : QuackSequence) -> float:
|
||||
"""This method calculates the simulation length based on the settings and the pulse sequence.
|
||||
|
||||
Returns:
|
||||
float: The simulation length in seconds.
|
||||
"""
|
||||
events = sequence.events
|
||||
simulation_length = 0
|
||||
for event in events:
|
||||
simulation_length += event.duration
|
||||
return simulation_length
|
||||
|
||||
def translate_rx_event(self, sequence : QuackSequence) -> tuple:
|
||||
"""This method translates the RX event of the pulse sequence to the limr object.
|
||||
|
||||
Returns:
|
||||
tuple: A tuple containing the start and stop time of the RX event in µs
|
||||
"""
|
||||
# This is a correction factor for the RX event. The offset of the first pulse is 2.2µs longer than from the specified samples.
|
||||
events = sequence.events
|
||||
|
||||
previous_events_duration = 0
|
||||
# offset = 0
|
||||
rx_duration = 0
|
||||
for event in events:
|
||||
logger.debug("Event %s has parameters: %s", event.name, event.parameters)
|
||||
for parameter in event.parameters.values():
|
||||
logger.debug(
|
||||
"Parameter %s has options: %s", parameter.name, parameter.options
|
||||
)
|
||||
|
||||
if (
|
||||
parameter.name == sequence.RX_READOUT
|
||||
and parameter.get_option_by_name(RXReadout.RX).value
|
||||
):
|
||||
# Get the length of all previous events
|
||||
previous_events = events[: events.index(event)]
|
||||
previous_events_duration = sum(
|
||||
[event.duration for event in previous_events]
|
||||
)
|
||||
rx_duration = event.duration
|
||||
|
||||
rx_begin = float(previous_events_duration)
|
||||
if rx_duration:
|
||||
rx_stop = rx_begin + float(rx_duration)
|
||||
return rx_begin * 1e6, rx_stop * 1e6
|
||||
|
||||
else:
|
||||
return None, None
|
||||
|
||||
def set_frequency(self, value: str) -> None:
|
||||
"""This method is called when the set_frequency signal is received from the core.
|
||||
|
||||
For the simulator this just prints a warning that the simulator is selected.
|
||||
|
||||
Args:
|
||||
value (str) : The new frequency in MHz.
|
||||
"""
|
||||
logger.debug("Setting frequency to: %s", value)
|
||||
try:
|
||||
self.module.model.target_frequency = float(value)
|
||||
logger.debug("Successfully set frequency to: %s", value)
|
||||
except ValueError:
|
||||
logger.warning("Could not set frequency to: %s", value)
|
||||
self.module.nqrduck_signal.emit(
|
||||
"notification", ["Error", "Could not set frequency to: " + value]
|
||||
)
|
||||
self.module.nqrduck_signal.emit("failure_set_frequency", value)
|
||||
|
||||
def set_averages(self, value: str) -> None:
|
||||
"""This method is called when the set_averages signal is received from the core.
|
||||
|
||||
It sets the averages in the model used for the simulation.
|
||||
|
||||
Args:
|
||||
value (str): The value to set the averages to.
|
||||
"""
|
||||
logger.debug("Setting averages to: %s", value)
|
||||
try:
|
||||
self.module.model.averages = int(value)
|
||||
logger.debug("Successfully set averages to: %s", value)
|
||||
except ValueError:
|
||||
logger.warning("Could not set averages to: %s", value)
|
||||
self.module.nqrduck_signal.emit(
|
||||
"notification", ["Error", "Could not set averages to: " + value]
|
||||
)
|
||||
self.module.nqrduck_signal.emit("failure_set_averages", value)
|
327
src/quackseq/spectrometer/simulator_model.py
Normal file
327
src/quackseq/spectrometer/simulator_model.py
Normal file
|
@ -0,0 +1,327 @@
|
|||
"""The model module for the simulator spectrometer."""
|
||||
|
||||
import logging
|
||||
from quackseq.spectrometer.spectrometer_model import SpectrometerModel
|
||||
from quackseq.spectrometer.spectrometer_settings import IntSetting, FloatSetting, StringSetting
|
||||
from quackseq.pulseparameters import TXPulse, RXReadout
|
||||
|
||||
logger = logging.getLogger(__name__)
|
||||
|
||||
|
||||
class SimulatorModel(SpectrometerModel):
|
||||
"""Model class for the simulator spectrometer."""
|
||||
|
||||
# Simulation settings
|
||||
NUMBER_POINTS = "N. simulation points"
|
||||
NUMBER_ISOCHROMATS = "N. of isochromats"
|
||||
INITIAL_MAGNETIZATION = "Initial magnetization"
|
||||
GRADIENT = "Gradient (mT/m))"
|
||||
NOISE = "Noise (uV)"
|
||||
|
||||
# Hardware settings
|
||||
LENGTH_COIL = "Length coil (m)"
|
||||
DIAMETER_COIL = "Diameter coil (m)"
|
||||
NUMBER_TURNS = "Number turns"
|
||||
Q_FACTOR_TRANSMIT = "Q factor Transmit"
|
||||
Q_FACTOR_RECEIVE = "Q factor Receive"
|
||||
POWER_AMPLIFIER_POWER = "PA power (W)"
|
||||
GAIN = "Gain"
|
||||
TEMPERATURE = "Temperature (K)"
|
||||
AVERAGES = "Averages"
|
||||
LOSS_TX = "Loss TX (dB)"
|
||||
LOSS_RX = "Loss RX (dB)"
|
||||
CONVERSION_FACTOR = "Conversion factor"
|
||||
|
||||
# Sample settings, this will be done in a separate module later on
|
||||
NAME = "Name"
|
||||
DENSITY = "Density (g/cm^3)"
|
||||
MOLAR_MASS = "Molar mass (g/mol)"
|
||||
RESONANT_FREQUENCY = "Resonant freq. (Hz)"
|
||||
GAMMA = "Gamma (Hz/T)"
|
||||
NUCLEAR_SPIN = "Nuclear spin"
|
||||
SPIN_FACTOR = "Spin factor"
|
||||
POWDER_FACTOR = "Powder factor"
|
||||
FILLING_FACTOR = "Filling factor"
|
||||
T1 = "T1 (s)"
|
||||
T2 = "T2 (s)"
|
||||
T2_STAR = "T2* (s)"
|
||||
ATOM_DENSITY = "Atom density (1/cm^3)"
|
||||
SAMPLE_VOLUME = "Sample volume (m^3)"
|
||||
SAMPLE_LENGTH = "Sample length (m)"
|
||||
SAMPLE_DIAMETER = "Sample diameter (m)"
|
||||
|
||||
# Categories of the settings
|
||||
SIMULATION = "Simulation"
|
||||
HARDWARE = "Hardware"
|
||||
EXPERIMENTAL_Setup = "Experimental Setup"
|
||||
SAMPLE = "Sample"
|
||||
|
||||
def __init__(self):
|
||||
"""Initializes the SimulatorModel."""
|
||||
super().__init__()
|
||||
|
||||
# Simulation settings
|
||||
number_of_points_setting = IntSetting(
|
||||
self.NUMBER_POINTS,
|
||||
8192,
|
||||
"Number of points used for the simulation. This influences the dwell time in combination with the total event simulation given by the pulse sequence.",
|
||||
min_value=0,
|
||||
)
|
||||
self.add_setting(
|
||||
number_of_points_setting,
|
||||
self.SIMULATION,
|
||||
)
|
||||
|
||||
number_of_isochromats_setting = IntSetting(
|
||||
self.NUMBER_ISOCHROMATS,
|
||||
1000,
|
||||
"Number of isochromats used for the simulation. This influences the computation time.",
|
||||
min_value=0,
|
||||
max_value=10000,
|
||||
)
|
||||
self.add_setting(number_of_isochromats_setting, self.SIMULATION)
|
||||
|
||||
initial_magnetization_setting = FloatSetting(
|
||||
self.INITIAL_MAGNETIZATION,
|
||||
1,
|
||||
"Initial magnetization",
|
||||
min_value=0,
|
||||
)
|
||||
self.add_setting(initial_magnetization_setting, self.SIMULATION)
|
||||
|
||||
# This doesn't really do anything yet
|
||||
gradient_setting = FloatSetting(
|
||||
self.GRADIENT,
|
||||
1,
|
||||
"Gradient",
|
||||
)
|
||||
self.add_setting(gradient_setting, self.SIMULATION)
|
||||
|
||||
noise_setting = FloatSetting(
|
||||
self.NOISE,
|
||||
2,
|
||||
"Adds a specified level of random noise to the simulation to mimic real-world signal variations.",
|
||||
min_value=0,
|
||||
max_value=100,
|
||||
)
|
||||
self.add_setting(noise_setting, self.SIMULATION)
|
||||
|
||||
# Hardware settings
|
||||
coil_length_setting = FloatSetting(
|
||||
self.LENGTH_COIL,
|
||||
30e-3,
|
||||
"The length of the sample coil within the hardware setup.",
|
||||
min_value=1e-3,
|
||||
)
|
||||
self.add_setting(coil_length_setting, self.HARDWARE)
|
||||
|
||||
coil_diameter_setting = FloatSetting(
|
||||
self.DIAMETER_COIL,
|
||||
8e-3,
|
||||
"The diameter of the sample coil.",
|
||||
min_value=1e-3,
|
||||
)
|
||||
self.add_setting(coil_diameter_setting, self.HARDWARE)
|
||||
|
||||
number_turns_setting = FloatSetting(
|
||||
self.NUMBER_TURNS,
|
||||
8,
|
||||
"The total number of turns of the sample coil.",
|
||||
min_value=1,
|
||||
)
|
||||
self.add_setting(number_turns_setting, self.HARDWARE)
|
||||
|
||||
q_factor_transmit_setting = FloatSetting(
|
||||
self.Q_FACTOR_TRANSMIT,
|
||||
80,
|
||||
"The quality factor of the transmit path, which has an effect on the field strength for excitation.",
|
||||
min_value=1,
|
||||
)
|
||||
self.add_setting(q_factor_transmit_setting, self.HARDWARE)
|
||||
|
||||
q_factor_receive_setting = FloatSetting(
|
||||
self.Q_FACTOR_RECEIVE,
|
||||
80,
|
||||
"The quality factor of the receive path, which has an effect on the final SNR.",
|
||||
min_value=1,
|
||||
)
|
||||
self.add_setting(q_factor_receive_setting, self.HARDWARE)
|
||||
|
||||
power_amplifier_power_setting = FloatSetting(
|
||||
self.POWER_AMPLIFIER_POWER,
|
||||
110,
|
||||
"The power output capability of the power amplifier, determines the strength of pulses that can be generated.",
|
||||
min_value=0.1,
|
||||
)
|
||||
self.add_setting(power_amplifier_power_setting, self.HARDWARE)
|
||||
|
||||
gain_setting = FloatSetting(
|
||||
self.GAIN,
|
||||
6000,
|
||||
"The amplification factor of the receiver chain, impacting the final measured signal amplitude.",
|
||||
min_value=0.1,
|
||||
)
|
||||
self.add_setting(gain_setting, self.HARDWARE)
|
||||
|
||||
temperature_setting = FloatSetting(
|
||||
self.TEMPERATURE,
|
||||
300,
|
||||
"The absolute temperature during the experiment. This influences the SNR of the measurement.",
|
||||
min_value=0.1,
|
||||
max_value=400,
|
||||
)
|
||||
self.add_setting(temperature_setting, self.EXPERIMENTAL_Setup)
|
||||
|
||||
loss_tx_setting = FloatSetting(
|
||||
self.LOSS_TX,
|
||||
25,
|
||||
"The signal loss occurring in the transmission path, affecting the effective RF pulse power.",
|
||||
min_value=0.1,
|
||||
max_value=60,
|
||||
)
|
||||
self.add_setting(loss_tx_setting, self.EXPERIMENTAL_Setup)
|
||||
|
||||
loss_rx_setting = FloatSetting(
|
||||
self.LOSS_RX,
|
||||
25,
|
||||
"The signal loss in the reception path, which can reduce the signal that is ultimately detected.",
|
||||
min_value=0.1,
|
||||
max_value=60,
|
||||
)
|
||||
self.add_setting(loss_rx_setting, self.EXPERIMENTAL_Setup)
|
||||
|
||||
conversion_factor_setting = FloatSetting(
|
||||
self.CONVERSION_FACTOR,
|
||||
2884,
|
||||
"Conversion factor (spectrometer units / V)",
|
||||
)
|
||||
self.add_setting(
|
||||
conversion_factor_setting,
|
||||
self.EXPERIMENTAL_Setup,
|
||||
) # Conversion factor for the LimeSDR based spectrometer
|
||||
|
||||
# Sample settings
|
||||
sample_name_setting = StringSetting(
|
||||
self.NAME,
|
||||
"BiPh3",
|
||||
"The name of the sample.",
|
||||
)
|
||||
self.add_setting(sample_name_setting, self.SAMPLE)
|
||||
|
||||
density_setting = FloatSetting(
|
||||
self.DENSITY,
|
||||
1.585e6,
|
||||
"The density of the sample. This is used to calculate the number of spins in the sample volume.",
|
||||
min_value=0.1,
|
||||
)
|
||||
self.add_setting(density_setting, self.SAMPLE)
|
||||
|
||||
molar_mass_setting = FloatSetting(
|
||||
self.MOLAR_MASS,
|
||||
440.3,
|
||||
"The molar mass of the sample. This is used to calculate the number of spins in the sample volume.",
|
||||
min_value=0.1,
|
||||
)
|
||||
self.add_setting(molar_mass_setting, self.SAMPLE)
|
||||
|
||||
resonant_frequency_setting = FloatSetting(
|
||||
self.RESONANT_FREQUENCY,
|
||||
83.56e6,
|
||||
"The resonant frequency of the observed transition.",
|
||||
min_value=1e5,
|
||||
)
|
||||
self.add_setting(resonant_frequency_setting, self.SAMPLE)
|
||||
|
||||
gamma_setting = FloatSetting(
|
||||
self.GAMMA,
|
||||
4.342e7,
|
||||
"The gyromagnetic ratio of the sample’s nuclei.",
|
||||
min_value=0,
|
||||
)
|
||||
self.add_setting(gamma_setting, self.SAMPLE)
|
||||
|
||||
# This could be updated to a selection setting
|
||||
nuclear_spin_setting = FloatSetting(
|
||||
self.NUCLEAR_SPIN,
|
||||
9 / 2,
|
||||
"The nuclear spin of the sample’s nuclei.",
|
||||
min_value=0,
|
||||
)
|
||||
self.add_setting(nuclear_spin_setting, self.SAMPLE)
|
||||
|
||||
spin_factor_setting = FloatSetting(
|
||||
self.SPIN_FACTOR,
|
||||
2,
|
||||
"The spin factor represents the scaling coefficient for observable nuclear spin transitions along the x-axis, derived from the Pauli I x 0 -matrix elements.",
|
||||
min_value=0,
|
||||
)
|
||||
self.add_setting(spin_factor_setting, self.SAMPLE)
|
||||
|
||||
powder_factor_setting = FloatSetting(
|
||||
self.POWDER_FACTOR,
|
||||
0.75,
|
||||
"A factor representing the crystallinity of the solid sample. A value of 0.75 corresponds to a powder sample.",
|
||||
min_value=0,
|
||||
max_value=1,
|
||||
)
|
||||
self.add_setting(powder_factor_setting, self.SAMPLE)
|
||||
|
||||
filling_factor_setting = FloatSetting(
|
||||
self.FILLING_FACTOR,
|
||||
0.7,
|
||||
"The ratio of the sample volume that occupies the coil’s sensitive volume.",
|
||||
min_value=0,
|
||||
max_value=1,
|
||||
)
|
||||
self.add_setting(filling_factor_setting, self.SAMPLE)
|
||||
|
||||
t1_setting = FloatSetting(
|
||||
self.T1,
|
||||
83.5e-5,
|
||||
"The longitudinal or spin-lattice relaxation time of the sample, influencing signal recovery between pulses.",
|
||||
min_value=1e-6,
|
||||
)
|
||||
self.add_setting(t1_setting, self.SAMPLE)
|
||||
|
||||
t2_setting = FloatSetting(
|
||||
self.T2,
|
||||
396e-6,
|
||||
"The transverse or spin-spin relaxation time, determining the rate at which spins dephase and the signal decays in the xy plane",
|
||||
min_value=1e-6,
|
||||
)
|
||||
self.add_setting(t2_setting, self.SAMPLE)
|
||||
|
||||
t2_star_setting = FloatSetting(
|
||||
self.T2_STAR,
|
||||
50e-6,
|
||||
"The effective transverse relaxation time, incorporating effects of EFG inhomogeneities and other dephasing factors.",
|
||||
min_value=1e-6,
|
||||
)
|
||||
self.add_setting(t2_star_setting, self.SAMPLE)
|
||||
|
||||
self.averages = 1
|
||||
self.target_frequency = 100e6
|
||||
|
||||
@property
|
||||
def averages(self):
|
||||
"""The number of averages used for the simulation.
|
||||
|
||||
More averages improve the signal-to-noise ratio of the simulated signal.
|
||||
"""
|
||||
return self._averages
|
||||
|
||||
@averages.setter
|
||||
def averages(self, value):
|
||||
self._averages = value
|
||||
|
||||
@property
|
||||
def target_frequency(self):
|
||||
"""The target frequency for the simulation.
|
||||
|
||||
Doesn't do anything at the moment.
|
||||
"""
|
||||
return self._target_frequency
|
||||
|
||||
@target_frequency.setter
|
||||
def target_frequency(self, value):
|
||||
self._target_frequency = value
|
39
src/quackseq/spectrometer/spectrometer.py
Normal file
39
src/quackseq/spectrometer/spectrometer.py
Normal file
|
@ -0,0 +1,39 @@
|
|||
class Spectrometer():
|
||||
"""Base class for spectrometers.
|
||||
|
||||
This class should be inherited by all spectrometers.
|
||||
The spectrometers then need to implement the methods of this class.
|
||||
"""
|
||||
|
||||
def run_sequence(self, sequence):
|
||||
"""Starts the measurement.
|
||||
|
||||
This method should be called when the measurement is started.
|
||||
"""
|
||||
raise NotImplementedError
|
||||
|
||||
def set_frequency(self, value : float):
|
||||
"""Sets the frequency of the spectrometer."""
|
||||
raise NotImplementedError
|
||||
|
||||
def set_averages(self, value : int):
|
||||
"""Sets the number of averages."""
|
||||
raise NotImplementedError
|
||||
|
||||
@property
|
||||
def controller(self):
|
||||
"""The controller of the spectrometer."""
|
||||
return self._controller
|
||||
|
||||
@controller.setter
|
||||
def controller(self, controller):
|
||||
self._controller = controller
|
||||
|
||||
@property
|
||||
def model(self):
|
||||
"""The model of the spectrometer."""
|
||||
return self._model
|
||||
|
||||
@model.setter
|
||||
def model(self, model):
|
||||
self._model = model
|
19
src/quackseq/spectrometer/spectrometer_controller.py
Normal file
19
src/quackseq/spectrometer/spectrometer_controller.py
Normal file
|
@ -0,0 +1,19 @@
|
|||
"""Base class for all spectrometer controllers."""
|
||||
|
||||
class SpectrometerController():
|
||||
"""The base class for all spectrometer controllers."""
|
||||
|
||||
def run_sequence(self, sequence):
|
||||
"""Starts the measurement.
|
||||
|
||||
This method should be called when the measurement is started.
|
||||
"""
|
||||
raise NotImplementedError
|
||||
|
||||
def set_frequency(self, value : float):
|
||||
"""Sets the frequency of the spectrometer."""
|
||||
raise NotImplementedError
|
||||
|
||||
def set_averages(self, value : int):
|
||||
"""Sets the number of averages."""
|
||||
raise NotImplementedError
|
|
@ -2,7 +2,7 @@
|
|||
|
||||
import logging
|
||||
from collections import OrderedDict
|
||||
from quackseq.spectrometer.spectrometer_setting import Setting
|
||||
from quackseq.spectrometer.spectrometer_settings import Setting
|
||||
|
||||
logger = logging.getLogger(__name__)
|
||||
|
||||
|
@ -12,22 +12,14 @@ class SpectrometerModel():
|
|||
|
||||
It contains the settings and pulse parameters of the spectrometer.
|
||||
|
||||
Args:
|
||||
module (Module) : The module that the spectrometer is connected to
|
||||
|
||||
Attributes:
|
||||
settings (OrderedDict) : The settings of the spectrometer
|
||||
"""
|
||||
|
||||
settings: OrderedDict
|
||||
|
||||
def __init__(self, module):
|
||||
"""Initializes the spectrometer model.
|
||||
|
||||
Args:
|
||||
module (Module) : The module that the spectrometer is connected to
|
||||
"""
|
||||
super().__init__(module)
|
||||
def __init__(self):
|
||||
"""Initializes the spectrometer model."""
|
||||
self.settings = OrderedDict()
|
||||
|
||||
def add_setting(self, setting: Setting, category: str) -> None:
|
||||
|
|
|
@ -109,7 +109,6 @@ class FloatSetting(NumericalSetting):
|
|||
def value(self, value):
|
||||
logger.debug(f"Setting {self.name} to {value}")
|
||||
self._value = float(value)
|
||||
self.settings_changed.emit()
|
||||
|
||||
|
||||
class IntSetting(NumericalSetting):
|
||||
|
@ -130,10 +129,8 @@ class IntSetting(NumericalSetting):
|
|||
description: str,
|
||||
min_value=None,
|
||||
max_value=None,
|
||||
spin_box: tuple = (False, False),
|
||||
) -> None:
|
||||
"""Create a new int setting."""
|
||||
self.spin_box = spin_box
|
||||
super().__init__(name, description, default, min_value, max_value)
|
||||
|
||||
@property
|
|
@ -1,8 +1,13 @@
|
|||
# Dummy test to communicate the structure
|
||||
import logging
|
||||
import matplotlib.pyplot as plt
|
||||
|
||||
from quackseq.pulsesequence import QuackSequence
|
||||
from quackseq.event import Event
|
||||
from quackseq.functions import RectFunction
|
||||
from quackseq.spectrometer.simulator import Simulator
|
||||
|
||||
logging.basicConfig(level=logging.DEBUG)
|
||||
|
||||
seq = QuackSequence("test")
|
||||
|
||||
|
@ -17,11 +22,11 @@ rect = RectFunction()
|
|||
|
||||
seq.set_tx_shape(tx, rect)
|
||||
|
||||
blank = Event("blank", "10u", seq)
|
||||
blank = Event("blank", "3u", seq)
|
||||
|
||||
seq.add_event(blank)
|
||||
|
||||
rx = Event("rx", "10u", seq)
|
||||
rx = Event("rx", "50u", seq)
|
||||
#rx.set_rx_phase(0)
|
||||
|
||||
seq.set_rx(rx, True)
|
||||
|
@ -36,11 +41,12 @@ json = seq.to_json()
|
|||
|
||||
print(json)
|
||||
|
||||
#sim = Simulator()
|
||||
sim = Simulator()
|
||||
|
||||
#sim.set_averages(100)
|
||||
sim.set_averages(100)
|
||||
|
||||
# Returns the data at the RX event
|
||||
#result = sim.run(seq)
|
||||
result = sim.run_sequence(seq)
|
||||
|
||||
#result.plot()
|
||||
plt.plot(result.tdx, abs(result.tdy))
|
||||
plt.show()
|
||||
|
|
Loading…
Reference in a new issue