Linting.

src/nqrduck_spectrometer_simulator/__init__.py

@@ -0,0 +1 @@
+"""Init file for the nqrduck_spectrometer_simulator package."""

src/nqrduck_spectrometer_simulator/controller.py

@@ -1,3 +1,5 @@
+"""The controller module for the simulator spectrometer."""
+
 import logging
 import numpy as np
 from nqrduck_spectrometer.base_spectrometer_controller import BaseSpectrometerController
@@ -11,11 +13,15 @@ logger = logging.getLogger(__name__)
 
 
 class SimulatorController(BaseSpectrometerController):
+    """The controller class for the nqrduck simulator module."""
+
     def __init__(self, module):
+        """Initializes the SimulatorController."""
         super().__init__(module)
 
     def start_measurement(self):
         """This method  is called when the start_measurement signal is received from the core.
+
         It will becalled if the simulator is the  active  spectrometer.
         This will start the simulation based on the settings and the pulse sequence.
         """
@@ -31,7 +37,8 @@ class SimulatorController(BaseSpectrometerController):
         except ValueError:
             logger.warning("Could not translate pulse sequence")
             self.module.nqrduck_signal.emit(
-                "measurement_error", "Could not translate pulse sequence. Did you configure one?"
+                "measurement_error",
+                "Could not translate pulse sequence. Did you configure one?",
             )
             return
 
@@ -206,7 +213,7 @@ class SimulatorController(BaseSpectrometerController):
         """
         model = self.module.model
 
-        noise = float(model.get_setting_by_name(model.NOISE).value)
+        # noise = float(model.get_setting_by_name(model.NOISE).value)
         simulation = Simulation(
             sample=sample,
             pulse=pulse_array,
@@ -276,7 +283,7 @@ class SimulatorController(BaseSpectrometerController):
         events = self.module.model.pulse_programmer.model.pulse_sequence.events
 
         previous_events_duration = 0
-        offset = 0
+        # offset = 0
         rx_duration = 0
         for event in events:
             logger.debug("Event %s has parameters: %s", event.name, event.parameters)
@@ -306,7 +313,11 @@ class SimulatorController(BaseSpectrometerController):
 
     def set_frequency(self, value: str) -> None:
         """This method is called when the set_frequency signal is received from the core.
+
         For the simulator this just prints a  warning that the simulator is selected.
+
+        Args:
+            value (str) : The new frequency in MHz.
         """
         logger.debug("Setting frequency to: %s", value)
         try:
@@ -321,6 +332,7 @@ class SimulatorController(BaseSpectrometerController):
 
     def set_averages(self, value: str) -> None:
         """This method is called when the set_averages signal is received from the core.
+
         It sets the averages in the model used for the simulation.
 
         Args:

src/nqrduck_spectrometer_simulator/model.py

@@ -1,3 +1,5 @@
+"""The model module for the simulator spectrometer."""
+
 import logging
 from nqrduck_spectrometer.base_spectrometer_model import BaseSpectrometerModel
 from nqrduck_spectrometer.pulseparameters import TXPulse, RXReadout
@@ -11,6 +13,8 @@ logger = logging.getLogger(__name__)
 
 
 class SimulatorModel(BaseSpectrometerModel):
+    """Model class for the simulator spectrometer."""
+
     # Simulation settings
     NUMBER_POINTS = "N. simulation points"
     NUMBER_ISOCHROMATS = "N. of isochromats"
@@ -61,6 +65,7 @@ class SimulatorModel(BaseSpectrometerModel):
     RX = "RX"
 
     def __init__(self, module):
+        """Initializes the SimulatorModel."""
         super().__init__(module)
 
         # Simulation settings
@@ -161,9 +166,7 @@ class SimulatorModel(BaseSpectrometerModel):
             "The power output capability of the power amplifier, determines the strength of pulses that can be generated.",
             min_value=0.1,
         )
-        self.add_setting(
+        self.add_setting(power_amplifier_power_setting, self.HARDWARE)
-            power_amplifier_power_setting, self.HARDWARE
-        )
 
         gain_setting = FloatSetting(
             self.GAIN,
@@ -171,9 +174,7 @@ class SimulatorModel(BaseSpectrometerModel):
             "The amplification factor of the receiver chain, impacting the final measured signal amplitude.",
             min_value=0.1,
         )
-        self.add_setting(
+        self.add_setting(gain_setting, self.HARDWARE)
-            gain_setting, self.HARDWARE
-        )
 
         temperature_setting = FloatSetting(
             self.TEMPERATURE,
@@ -245,9 +246,7 @@ class SimulatorModel(BaseSpectrometerModel):
             "The resonant frequency of the observed transition.",
             min_value=1e5,
         )
-        self.add_setting(
+        self.add_setting(resonant_frequency_setting, self.SAMPLE)
-            resonant_frequency_setting, self.SAMPLE
-        )
 
         gamma_setting = FloatSetting(
             self.GAMMA,
@@ -263,7 +262,6 @@ class SimulatorModel(BaseSpectrometerModel):
             9 / 2,
             "The nuclear spin of the sample’s nuclei.",
             min_value=0,
-
         )
         self.add_setting(nuclear_spin_setting, self.SAMPLE)
 
@@ -339,6 +337,10 @@ class SimulatorModel(BaseSpectrometerModel):
 
     @property
     def averages(self):
+        """The number of averages used for the simulation.
+
+        More averages improve the signal-to-noise ratio of the simulated signal.
+        """
         return self._averages
 
     @averages.setter
@@ -347,9 +349,12 @@ class SimulatorModel(BaseSpectrometerModel):
 
     @property
     def target_frequency(self):
+        """The target frequency for the simulation.
+
+        Doesn't do anything at the moment.
+        """
         return self._target_frequency
 
     @target_frequency.setter
     def target_frequency(self, value):
         self._target_frequency = value
-

src/nqrduck_spectrometer_simulator/simulator.py

@@ -1,3 +1,5 @@
+"""Creation of the Simulator Spectrometer."""
+
 from nqrduck_spectrometer.base_spectrometer import BaseSpectrometer
 from .model import SimulatorModel
 from .view import SimulatorView

src/nqrduck_spectrometer_simulator/view.py

@@ -1,7 +1,13 @@
+"""The View class for the simulator module."""
+
 from nqrduck_spectrometer.base_spectrometer_view import BaseSpectrometerView
 
+
 class SimulatorView(BaseSpectrometerView):
+    """The View class for the simulator module."""
+
     def __init__(self, module):
+        """Initializes the SimulatorView."""
         super().__init__(module)
         # This automatically generates the settings widget based on the settings in the model
         self.widget = self.load_settings_ui()