Commit graph

149 commits

Author SHA1 Message Date
moneromooo-monero
cca95c1c7a
blockchain_db: do not throw on expected partial results getting keys
When scanning for outputs used in a set of incoming blocks,
we expect that some of the inputs in their transactions will
not be found in the blockchain, as they could be in previous
blocks in that set. Those outputs will be scanned there at
a later point. In this case, we add a flag to control wehther
an output not being found is expected or not.
2017-02-13 19:05:30 +00:00
moneromooo-monero
f2986ccfc1
db_lmdb: fix bad height saved in tx data
The recent change to not keep separate track of the blockchain
height caused the reported height to jump early in the lmdb
transaction (when the block data is added to the blocks table),
rather than at the end, after everything succeeded. Since the
block data is added before the transaction data, this caused
the transaction data to be saved with a height one more than
its expected value.

Fix this by saving the block data last. This should have no
side effects.
2017-02-11 10:16:18 +00:00
kenshi84
8027ce0c75 extract some basic code from libcryptonote_core into libcryptonote_basic 2017-02-08 22:45:15 +09:00
Miguel Herranz
95f3e193f0 Update and use blockchain data files defines 2017-01-28 15:55:14 +01:00
Howard Chu
843769f88f
Tweak some msg loglevels 2017-01-16 20:42:59 +00:00
moneromooo-monero
5833d66f65
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.

To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:

This one is (mostly) silent, only outputting fatal errors:

MONERO_LOGS=*:FATAL

This one is very verbose:

MONERO_LOGS=*:TRACE

This one is totally silent (logwise):

MONERO_LOGS=""

This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):

MONERO_LOGS=*:WARNING,verify:FATAL

Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE

Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:

MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE

Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.

Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.

The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-16 00:25:46 +00:00
Riccardo Spagni
65e33b1bc5
Merge pull request #1506
3ff54bdd Check for correct thread before ending batch transaction (Howard Chu)
eaf8470b Must wait for previous batch to finish before starting new one (Howard Chu)
c903c554 Don't cache block height, always get from DB (Howard Chu)
eb1fb601 Tweak default db-sync-mode to fast:async:1 (Howard Chu)
0693cff9 Use batch transactions when syncing (Howard Chu)
2017-01-15 14:43:12 -05:00
Howard Chu
3ff54bdd7a
Check for correct thread before ending batch transaction 2017-01-15 15:51:57 +00:00
Howard Chu
c903c5541e
Don't cache block height, always get from DB 2017-01-14 22:43:06 +00:00
Howard Chu
0693cff925
Use batch transactions when syncing
Faster throughput while avoiding corruption. I.e., makes
running with --db-sync-mode safe more tolerable.
2017-01-14 22:43:06 +00:00
moneromooo-monero
0478ac6848
blockchain: allow marking "tx not found" without an exception
This is a normal occurence in many cases, and there is no need
to spam the log with those when it is.
2017-01-07 20:52:17 +00:00
moneromooo-monero
0e18f46522
db_lmdb: add info in an error message when we can't get an output
Will be useful to debug
2016-12-01 14:31:40 +00:00
moneromooo-monero
c96f9b0255
db_lmdb: guard against going out of sync on unexpected db results
m_num_outputs keeps track of the number of outputs, which should
be the same as the size of both the output_txs and output_amounts
databases. If one goes out of sync, we need to throw to abort
whatever it is we were doing.
2016-12-01 14:29:35 +00:00
moneromooo-monero
bef51e677e
db_lmdb: minor pedantic tweaks
Add consts in a few places where it makes sense, avoid unnecessary
memory reallocation where we know the full size needed at the outset,
simplify and avoid memory copy.
2016-12-01 14:28:09 +00:00
moneromooo-monero
3465c4ebc7
db_lmdb: set same packing format for output_data_t and pre_rct_output_data_t
For safety, though it seems to have been the case already.

Also add a comment about the necessary layout identity.
2016-12-01 14:26:18 +00:00
moneromooo-monero
88faec75fe
wallet: select part of the fake outs from recent outputs
25% of the outputs are selected from the last 5 days (if possible),
in order to avoid the common case of sending recently received
outputs again. 25% and 5 days are subject to review later, since
it's just a wallet level change.
2016-10-15 18:17:16 +01:00
Riccardo Spagni
995dde4f95
Merge pull request #1128
d2e11f3 db_lmdb: do not error if dropping a non existent hard fork table (moneromooo-monero)
2016-09-29 22:16:15 +02:00
moneromooo-monero
d2e11f374a
db_lmdb: do not error if dropping a non existent hard fork table 2016-09-24 16:15:50 +01:00
Myagui
12427dd8d3 Fix minor typo in "need resize" message.
Message observed while synchronizing a node from scratch.
"LMDB memory map needs resized"
Proposing a change to:
"LMDB memory map needs to be resized"
2016-09-21 20:40:07 +01:00
moneromooo-monero
6cf8ca2a7f
core: faster find_blockchain_supplement
Since this queries block heights for blocks that may or may not
exist, queries for non existing blocks would throw an exception,
and that would slow down the loop a lot. 7 seconds to go through
a 30 hash list.

Fix this by adding an optional return block height to block_exists
and using this instead. Actual errors will still throw an
exception.

This also cuts down on log exception spam.
2016-08-31 10:03:32 +01:00
moneromooo-monero
1cdba42a77
db_lmdb: fix reorg with "halfway rct" coinbase outputs 2016-08-29 22:44:17 +01:00
moneromooo-monero
59a66e209a
move the rct commitments to the output_amounts database
Since these are needed at the same time as the output pubkeys,
this is a whole lot faster, and takes less space. Only outputs
of 0 amount store the commitment. When reading other outputs,
a fake commitment is regenerated on the fly. This avoids having
to rewrite the database to add space for fake commitments for
existing outputs.

This code relies on two things:

- LMDB must support fixed size records per key, rather than
per database (ie, all records on key 0 are the same size, all
records for non 0 keys are same size, but records from key 0
and non 0 keys do have different sizes).

- the commitment must be directly after the rest of the data
in outkey and output_data_t.
2016-08-28 21:29:02 +01:00
moneromooo-monero
dc4aad7eb5
add rct to the protocol
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
2016-08-28 21:28:37 +01:00
moneromooo-monero
211d1db762
db_lmdb: update reset for recent db changes
- we need to drop the new m_tx_indices database
- we reset the version to current version

This fixes the core tests failing to initialize.
2016-08-28 21:28:35 +01:00
moneromooo-monero
eb56d0f994
blockchain_db: add functions for adding/removing/getting rct commitments 2016-08-28 21:28:11 +01:00
moneromooo-monero
f88029e72a
db_lmdb: do not try to modify the database in read only mode 2016-08-26 19:33:25 +01:00
Riccardo Spagni
0faf572db8
Merge pull request #948
11dc091 Fake outs set is now decided by the wallet (moneromooo-monero)
1593553 new unlocked parameter to output_histogram (moneromooo-monero)
2016-08-11 22:43:14 +02:00
moneromooo-monero
240864f529
db_lmdb: errors dropping hf starting height db on reset are not fatal
This db is now dropped unconditionally, so may or may not be there
in the first place.
2016-08-10 10:50:17 +01:00
moneromooo-monero
1593553e03
new unlocked parameter to output_histogram
This constrains the number of instances of any amount
to the unlocked ones (as defined by the default unlock time
setting: outputs with non default unlock time are not
considered, so may be counted as unlocked even if they are
not actually unlocked).
2016-08-01 22:16:00 +01:00
moneromooo-monero
121165f222
db_lmdb: add some missing api call checks 2016-07-26 22:39:51 +01:00
moneromooo-monero
d7b681cd65
remove hf_starting_height db
It's not really needed, it used to be an optimization for when
that code was not using the db and needed to recalculate things
fast on startup.
2016-07-13 21:38:34 +01:00
Howard Chu
2b0fa05f0d Another take on migration
Delete old indices and recreate them, rather than updating them
Maybe not quite as slow as before.
2016-04-24 17:46:50 +01:00
Howard Chu
c14f9efd52 Migration
Migrate from DB version 0 to version 1 on startup
2016-04-08 03:11:05 +01:00
Howard Chu
d7ea7d9a23 Merge branch 'performance' into master 2016-04-05 21:13:16 +01:00
Howard Chu
372acee723 Cleanup
drop obsolete remove_output()
fix get_output_key(global), fix crash in blockchain_dump
2016-04-05 21:05:24 +01:00
Howard Chu
591e421875 Cleanup and clarify
Try to rationalize the variable names, document usage.
2016-04-05 20:57:45 +01:00
Howard Chu
b2f1c58805 Use cursors in some remove functions
Helps when they're called repeatedly in one txn
2016-04-05 20:57:31 +01:00
Howard Chu
118dd69dd5 Use DUPFIXED for block_info and output_txs
Saves another ~150MB or so on the full blockchain
2016-04-05 20:55:16 +01:00
Howard Chu
6225716f3c More outputs consolidation
Also bumped DB VERSION to 1
Another significant speedup and space savings:
Get rid of global_output_indices, remove indirection from output to keys

This is the change warptangent described on irc but never got to finish.
2016-04-05 20:55:12 +01:00
Howard Chu
7c5abdc3a3 Use DUPFIXED for output_keys
Saves another 90MB on 200000 block import.
Had to bring back compare_uint64 for this, but it's safe since
this table is always 64-bit aligned.
2016-04-05 20:54:42 +01:00
Howard Chu
8e9d8e3364 Use DUPFIXED for tx_indices
Small space savings, no measurable speedup
2016-04-05 20:54:39 +01:00
Howard Chu
a12f9365f8 Use DUPFIXED for block_heights
Only a small savings...
2016-04-05 20:54:07 +01:00
Howard Chu
38c2277d6f Use DUPFIXED for spent_keys 2016-04-05 20:54:07 +01:00
warptangent
bf769c32ba Add back changes from revert.
m_tx_outputs doesn't need to be changed, as it's no longer dup list.
2016-04-05 20:54:07 +01:00
warptangent
46b991b362 Use MDB_APPEND mode with two tx subdbs
This is possible on those using a tx index as a key.
2016-04-05 20:54:07 +01:00
warptangent
9aadedb1d0 Schema update: tx_indices - consolidate the tx subdbs from 5 to 3 2016-04-05 20:54:06 +01:00
warptangent
a2f518aa01 Schema update: tx_indices - yet less indirection 2016-04-05 20:54:06 +01:00
warptangent
8d12a8df2c Schema update: tx_indices - improve further with less indirection 2016-04-05 20:54:06 +01:00
warptangent
7c013f66e9 Add batch warning for further review 2016-04-05 20:54:06 +01:00
warptangent
ae0854a431 Schema update: tx_indices 2016-04-05 20:54:06 +01:00