Commit graph

422 commits

Author SHA1 Message Date
moneromooo-monero
aae14a107a
simplewallet: allow setting confirm-missing-payment-id in watch wallets
These can create transactions, even though they cannot sign them.
2017-04-02 11:10:11 +01:00
Antti Keränen
17c7c62d55
Add per transaction fee to transfer command
Allows priority argument default/unimportant/normal/elevated/priority to
be used per transaction in CLI wallet's transfer command. Resolves #1913.
2017-04-01 09:59:15 +03:00
kenshi84
89e100bc8c
wallet cli: remove redundant password confirm in donate command 2017-03-27 11:02:20 +09:00
moneromooo-monero
899497069b
simplewallet: factor the per-variable code in set_variable 2017-03-26 17:52:36 +01:00
moneromooo-monero
a50c4a4fad
wallet: option to merge destinations
With the change from the original transfer method to the new
algorithm, payments to the same destination were merged. It
seemed like a good idea, optimizing space. However, it is a
useful tool for people who want to split large outputs into
several smaller ones (ie, service providers making frequent
payments, and who do not like a large chunk of their balance
being locked for 10 blocks after each payment).

Default to off, which is a change from the previous behavior.
2017-03-25 11:44:04 +00:00
Riccardo Spagni
119803f26e
Merge pull request #1921
2bee92db Fixed typo in v5 hard fork finalized date (Derek Zhang)
d17179d1 Fixed typo in CLI wallet help message (Derek Zhang)
2017-03-25 13:29:11 +02:00
Derek Zhang
d17179d14b Fixed typo in CLI wallet help message 2017-03-24 18:05:05 -07:00
moneromooo-monero
0ad87db01f
wallet: try to save large outputs when using an unneeded second input
When a single input is enough to satisfy a transfer, the code would
previously try to add a second input, to match the "canonical" makeup
of a transaction with two inputs and two outputs. This would cause
wallets to slowly merge outputs till all the monero ends up in a
single output, which causes trouble when making two transactions
one after the other, since change is locked for 10 blocks, and an
increasing portion of the remaining balance would end up locked on
each transaction.

There are two new settings (min-output-count and min-output-value)
which can control when to stop adding such unneeded second outputs.
The idea is that small "dust" outputs will still get added, but
larger ones will not.

Enable with, eg:

set min-output-count 10
set min-output-value 30

to avoid using an unneeded second output of 30 monero or more, if
there would be less than 10 such outputs left.

This does not invalidate any other reason why such outputs would
be used (ie, when they're really needed to satisfy a transfer, or
when randomly picked in the normal course of selection). This may
be improved in the future.
2017-03-24 21:04:08 +00:00
Akademik Prokhor Zakharov
9bccf1b11e Transfer help
New pull request because I couldn't figure out how to change the previous one.
1. For clarity, I want to focus the help text for the 'transfer' command on the most typical use case (a single payment). 
2. New users will prefer to use 'transfer', so the older method 'transfer_original' should refer to 'transfer' rather than the other way around.
2017-03-22 14:10:34 +01:00
moneromooo-monero
995969b190
wallet: fix set_log not handling 0,xxx style settings 2017-03-21 11:17:05 +00:00
Riccardo Spagni
82411cdf3a
Merge pull request #1886
f9a2b527 simplewallet: allow setting tx priority in watch wallets (moneromooo-monero)
2017-03-18 20:31:37 +02:00
Riccardo Spagni
f33a696ec7
Merge pull request #1883
d0238313 use const references in catch blocks (moneromooo-monero)
2017-03-18 20:30:19 +02:00
moneromooo-monero
f9a2b5279d
simplewallet: allow setting tx priority in watch wallets
Those can create unsigned transactions
2017-03-18 18:07:54 +00:00
moneromooo-monero
d023831327
use const references in catch blocks 2017-03-18 12:56:07 +00:00
moneromooo-monero
1a666c3016
simplewallet: catch case where no transactions are made
This would otherwise be a silent noop, which is confusing.
This can happen if the daemon is started, but not yet ready
to service all requests, and this is a safe catch all.
2017-03-18 11:44:31 +00:00
moneromooo-monero
3396a9f2af
Add intervening v5 fork for increased min block size
Minimum mixin 4 and enforced ringct is moved from v5 to v6.
v5 is now used for an increased minimum block size (from 60000
to 300000) to cater for larger typical/minimum transaction size.

The fee algorithm is also changed to decrease the base per kB
fee, and add a cheap tier for those transactions which we do
not care if they get delayed (or even included in a block).
2017-03-15 08:32:51 +00:00
moneromooo-monero
4b48565c9e
wallet: add password command
Also tweak wallet2 password code to verify password without
saying it's a new wallet, because it's assuming things.
2017-03-05 14:53:46 +00:00
Riccardo Spagni
d35d626181
Merge pull request #1826
2c468dd4 allow user I/O in millinero, micronero, nanonero, piconero (moneromooo-monero)
2017-03-03 14:31:04 +02:00
Riccardo Spagni
78a99fe7da
Merge pull request #1820
7a44f38a Add support for the wallet to refresh pruned blocks (moneromooo-monero)
da18898f ringct: do not require range proof in decodeRct/decodeRctSimple (moneromooo-monero)
b49c6ab4 rpc: add a default category for daemon rpc (moneromooo-monero)
f113b92b core: add functions to serialize base tx info (moneromooo-monero)
6fd4b827 node_rpc_proxy: allow caching daemon RPC version (moneromooo-monero)
b5c74e40 wallet: invalidate node proxy cache when reconnecting (moneromooo-monero)
2017-03-03 14:30:02 +02:00
moneromooo-monero
2c468dd429
allow user I/O in millinero, micronero, nanonero, piconero 2017-03-02 19:02:41 +00:00
moneromooo-monero
b8a08f199a
wallet: fix --log-file not working 2017-02-28 09:07:56 +00:00
moneromooo-monero
7a44f38a7f
Add support for the wallet to refresh pruned blocks 2017-02-27 22:29:00 +00:00
kenshi84
eabe3bf20c
simplewallet: updated help message for 'set ask-password' 2017-02-24 17:54:30 +09:00
Riccardo Spagni
5aab25b60a
Merge pull request #1765
5cfddd74 Add support for smart mining through wallet. (Dion Ahmetaj)
2017-02-22 09:37:31 +02:00
Riccardo Spagni
c3599fa7b9
update copyright year, fix occasional lack of newline at line end 2017-02-21 19:38:18 +02:00
Dion Ahmetaj
5cfddd74e9 Add support for smart mining through wallet. 2017-02-21 11:45:47 -05:00
moneromooo-monero
83ec209f42
simplewallet: validate hex input size 2017-02-14 19:45:46 +00:00
Riccardo Spagni
cb54eeaa31
Merge pull request #1698
9459f331 simplewallet: print error when address is wrong (kenshi84)
2017-02-11 00:54:30 +02:00
Riccardo Spagni
eacf2124b6 Merge pull request #1689
ce7fcbb4 Add server auth to monerod, and client auth to wallet-cli and wallet-rpc (Lee Clagett)
2017-02-11 00:35:25 +02:00
kenshi84
9459f33178 simplewallet: print error when address is wrong 2017-02-08 23:04:48 +09:00
kenshi84
8027ce0c75 extract some basic code from libcryptonote_core into libcryptonote_basic 2017-02-08 22:45:15 +09:00
Lee Clagett
ce7fcbb4ae Add server auth to monerod, and client auth to wallet-cli and wallet-rpc 2017-02-06 01:15:41 -05:00
Riccardo Spagni
bcb7b0a9af
Merge pull request #1665
34719071 simplewallet: cleanup (moneromooo-monero)
a9a9b64b simplewallet: fix build (unqualified type not in current scope) (moneromooo-monero)
2017-02-04 17:21:11 +02:00
Riccardo Spagni
31cf4e7362
Merge pull request #1640
f97526e6 simplewallet: option to always ask password for any crytical operations (kenshi84)
2017-02-04 17:18:38 +02:00
kenshi84
f97526e641 simplewallet: option to always ask password for any crytical operations 2017-02-03 09:38:12 +09:00
moneromooo-monero
3471907160
simplewallet: cleanup
Remove empty static function which was refactored, as well as
leftover exception testing code.
2017-02-02 20:56:53 +00:00
moneromooo-monero
a9a9b64b13
simplewallet: fix build (unqualified type not in current scope) 2017-02-02 20:56:31 +00:00
Riccardo Spagni
10b625079b
Merge pull request #1645
9bd9906e Factor is_address_local code into a tools function (moneromooo-monero)
2017-02-02 21:27:45 +02:00
Riccardo Spagni
ab2b3480b2
Merge pull request #1639
48aa9cf0 Add change_password for simplewallet (Ashley Perpetual)
2017-02-02 21:22:30 +02:00
Riccardo Spagni
5fb3f97a55
Merge pull request #1629
c02e1cb9 Updates to epee HTTP client code   - http_simple_client now uses std::chrono for timeouts   - http_simple_client accepts timeouts per connect / invoke call   - shortened names of epee http invoke functions   - invoke command functions only take relative path, connection     is not automatically performed (Lee Clagett)
2017-02-02 19:32:01 +02:00
Ashley Perpetual
48aa9cf035 Add change_password for simplewallet 2017-01-29 03:04:17 +08:00
moneromooo-monero
9bd9906e8f
Factor is_address_local code into a tools function 2017-01-28 14:57:47 +00:00
Lee Clagett
c02e1cb943 Updates to epee HTTP client code
- http_simple_client now uses std::chrono for timeouts
  - http_simple_client accepts timeouts per connect / invoke call
  - shortened names of epee http invoke functions
  - invoke command functions only take relative path, connection
    is not automatically performed
2017-01-25 15:39:32 -05:00
kenshi84
55a8e982c0 moved get_account_address_from_str_or_url from libcommon to libcryptonote_core 2017-01-24 20:31:03 +09:00
Riccardo Spagni
39aaea8e62
Merge pull request #1599
17246d05 wallet: print exception message on get_random_outs_error (moneromooo-monero)
2017-01-20 21:00:01 -05:00
moneromooo-monero
17246d051d
wallet: print exception message on get_random_outs_error 2017-01-20 18:01:13 +00:00
kenshi84
78d560a933 simplewallet: use MAKE_CORE_RPC_VERSION(1,4) instead of 0x10004 2017-01-18 16:11:18 +09:00
Riccardo Spagni
ab69d5b367
Merge pull request #1569
16b8b66a specify restore height by YYYY-MM-DD format (kenshi84)
2017-01-15 20:32:57 -05:00
kenshi84
16b8b66adc specify restore height by YYYY-MM-DD format 2017-01-16 10:00:28 +09:00
moneromooo-monero
5833d66f65
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.

To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:

This one is (mostly) silent, only outputting fatal errors:

MONERO_LOGS=*:FATAL

This one is very verbose:

MONERO_LOGS=*:TRACE

This one is totally silent (logwise):

MONERO_LOGS=""

This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):

MONERO_LOGS=*:WARNING,verify:FATAL

Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE

Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:

MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE

Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.

Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.

The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-16 00:25:46 +00:00
Riccardo Spagni
2806842200
Merge pull request #1562
a081b39c Move key image export/import functions to wallet2 (Jaquee)
2017-01-13 14:38:29 -05:00
Riccardo Spagni
2a2f02e375
Merge pull request #1559
db56a03f Wallet2 + API: Callbacks for unconfirmed transfers (Jaquee)
2017-01-13 14:37:12 -05:00
Riccardo Spagni
433adee594
Merge pull request #1545
5ae00f0f add msg for donate (luigi1111)
2017-01-13 14:35:34 -05:00
Riccardo Spagni
5738e07fba
Merge pull request #1492
f1dde1a4 wallet cli: print originating block heights of mixin keys when making transfer (kenshi84)
2017-01-13 13:22:13 -05:00
Jaquee
a081b39c01
Move key image export/import functions to wallet2 2017-01-13 12:49:10 +01:00
Jaquee
db56a03ff2
Wallet2 + API: Callbacks for unconfirmed transfers 2017-01-12 18:25:34 +01:00
kenshi84
f1dde1a429 wallet cli: print originating block heights of mixin keys when making transfer 2017-01-09 15:10:34 +09:00
luigi1111
5ae00f0ff5 add msg for donate
#1498
2017-01-08 21:05:00 -06:00
luigi1111
db44a909ba Fix monero-wallet-cli compile
Not 100$ sure this is the right fix, nor whether address book entries from URL should be stored as addresses or URLs (or both with a check for change on payment).
2017-01-08 20:26:57 -06:00
Riccardo Spagni
59021496d8
Merge pull request #1537
c2135082 simplewallet: add a show_transfer <txid> command (moneromooo-monero)
19c4041d wallet_rpc_server: new RPC call to get a transfer by txid (moneromooo-monero)
2017-01-08 16:44:29 -08:00
Riccardo Spagni
c284b0fff7
Merge pull request #1503
542571f5 simplewallet: remove unnecessary local_args.erase(...) in set_variable() (kenshi84)
2017-01-08 16:38:01 -08:00
Riccardo Spagni
209a633a3c
Merge pull request #1496
adee1644 wallet cli: print unspent outputs with histogram (kenshi84)
2017-01-08 16:34:51 -08:00
Riccardo Spagni
f4b3989c61
Merge pull request #1482
38f00d07 wallet cli: viewing and editing address book (kenshi84)
2017-01-08 16:31:55 -08:00
moneromooo-monero
c21350823f
simplewallet: add a show_transfer <txid> command 2017-01-08 13:57:24 +00:00
kenshi84
adee16440a wallet cli: print unspent outputs with histogram 2016-12-26 16:03:16 +09:00
kenshi84
542571f5cb simplewallet: remove unnecessary local_args.erase(...) in set_variable() 2016-12-26 08:50:37 +09:00
kenshi84
99580adf66 make openalias also available for solo miner; introduce namespace tools::dns_utils; support integrated address with dns lookup 2016-12-21 23:12:15 +09:00
kenshi84
38f00d07f7 wallet cli: viewing and editing address book 2016-12-21 19:27:18 +09:00
moneromooo-monero
c31e42e2bb
simplewallet: bump output file format version
The serialization format changed, and while there is code
to load the older serialization format, an older monerod
will not be able to load a file saved by a new monerod,
even though both share the same version. This is not good,
and we prefer a version bump.
2016-12-20 19:02:51 +00:00
Riccardo Spagni
6847999fb8
Merge pull request #1472
2bddb8eb Refactored password prompting for wallets (Lee Clagett)
2016-12-20 17:46:58 +02:00
Riccardo Spagni
dca146f823
Merge pull request #1469
9e4b3724 simplewallet: add pending/pool/failed in the show_transfers help (moneromooo-monero)
2016-12-20 17:45:47 +02:00
Riccardo Spagni
1551ce98f2
Merge pull request #1466
c367d7df README: add note about the donate command (anonimal)
b9a28677 simplewallet: add return type for donate function (anonimal)
d36669fd simplewallet: hardcode Monero's donation address (anonimal)
2016-12-20 17:43:38 +02:00
kenshi84
07b9138cad support importing unportable outputs 2016-12-20 13:26:39 +09:00
Lee Clagett
2bddb8ebee Refactored password prompting for wallets 2016-12-19 20:00:43 -05:00
moneromooo-monero
9e4b3724c7
simplewallet: add pending/pool/failed in the show_transfers help
reported by nioc
2016-12-17 19:51:09 +00:00
anonimal
b9a28677e2
simplewallet: add return type for donate function
Resolves -Wreturn-type

References #1447 #1451
2016-12-17 03:37:20 +00:00
anonimal
d36669fd75
simplewallet: hardcode Monero's donation address
Closes #1447
References #1451
2016-12-17 02:52:09 +00:00
kenshi84
66e6af89ce added experimental boost::archive::portable_binary_{i|o}archive 2016-12-16 23:46:24 +09:00
Kenshi Takayama
2506d51d60 wallet cli: donate command 2016-12-15 19:01:36 +09:00
luigi1111
0fb5dc870d
monero-wallet-cli wording changes 'n' stuff
Possibly other pedantry. Pedants are people too.
2016-12-12 19:53:28 -06:00
moneromooo-monero
0b91d82574
simplewallet: restore automatically setting trusted local daemon 2016-12-08 20:01:24 +00:00
Riccardo Spagni
fe89782512
Merge pull request #1379
d6086f5b Improve daemon RPC version handling (moneromooo-monero)
2016-12-04 22:01:49 +02:00
moneromooo-monero
d6086f5b4e
Improve daemon RPC version handling
Daemon RPC version is now composed of a major and minor number,
so that incompatible changes bump the major version, while
compatible changes can still bump the minor version without
causing clients to unnecessarily complain.
2016-11-26 12:56:44 +00:00
Lee Clagett
91ffb61c25 Added command_line::is_yes 2016-11-25 21:57:27 -05:00
moneromooo-monero
6d76072612
simplewallet: remove double confirmation when submitting signed tx 2016-11-23 20:45:03 +00:00
Riccardo Spagni
2988e1be8c
Merge pull request #1344
a0131c8 wallet: auto sync outputs and key images in cold signing files (moneromooo-monero)
f806611 wallet2: fill key image and pubkey maps when importing outputs (moneromooo-monero)
5fe363c wallet: cast indices to string in logs to be nice to CLANG (moneromooo-monero)
11ae187 wallet2: try all tx keys when scanning a new transaction (moneromooo-monero)
072d646 wallet2: fill in key image map when importing key images (moneromooo-monero)
23d80b1 core: remove any tx pubkey from extra before adding one (moneromooo-monero)
d72376d simplewallet: add a verbose flag to incoming_transfers (moneromooo-monero)
47413a5 simplewallet: spell out change when signing a transfer (moneromooo-monero)
14cb088 simplewallet: print public keys too on spendkey/viewkey commands (moneromooo-monero)
a99ab49 wallet: fix serialization of new m_key_image_known member (moneromooo-monero)
2016-11-17 16:36:12 +02:00
moneromooo-monero
a0131c8be3
wallet: auto sync outputs and key images in cold signing files
When passing around unsigned and signed transactions, outputs
and key images are passed along (outputs are passed along unsigned
transactions from the hot wallet to the cold wallet, key images
are passed along with signed transations from the cold wallet
to the hot wallet), to allow more user friendly syncing between
hot and cold wallets.
2016-11-16 09:22:24 +00:00
moneromooo-monero
d72376d467
simplewallet: add a verbose flag to incoming_transfers
Prints pubkey and key image as well
2016-11-13 18:20:46 +00:00
moneromooo-monero
47413a5626
simplewallet: spell out change when signing a transfer
Also catch change to multiple addresses, this is unexpected
2016-11-13 17:48:45 +00:00
moneromooo-monero
14cb088300
simplewallet: print public keys too on spendkey/viewkey commands 2016-11-13 17:24:53 +00:00
moneromooo-monero
bd4da18525
simplewallet: include amount sent in transfer confirmation 2016-11-13 12:12:22 +00:00
Lee Clagett
265e4605ec Fixed generate-from-json bug introduced in 358e068 2016-11-12 21:55:08 -05:00
Lee Clagett
358e068e87 Created monero-wallet-rpc, moving functionality from monero-wallet-cli 2016-11-10 16:39:27 -05:00
moneromooo-monero
8aba0d4b4c
wallet: encrypt outputs and key images files with the view key
This key is available to both cold and hot wallet.
Authenticated encryption will guard against interception and/or
modification of the file.
2016-11-07 20:01:05 +00:00
moneromooo-monero
b5d6faada3
wallet: fix bad amounts/fees again
m_amount_out was sometimes getting initialized with the sum of
an transaction's outputs, and sometimes with the sum of outputs
that were not change. This caused confusion and bugs. We now
always set it to the sum of outputs. This reverts an earlier
fix for bad amounts as this used the other semantics. The wallet
data should be converted automatically in a percentage of cases
that I'm hesitant to estimate. In any case, restoring from seed
or keys or rebuilding the cache will get it right.
2016-11-02 23:11:30 +00:00
Riccardo Spagni
d53bc2eddf
Merge pull request #1281
bb560dd wallet: new import_outputs/export_outputs commands (moneromooo-monero)
2016-11-01 15:12:03 +02:00
Riccardo Spagni
95e0010fbb
Merge pull request #1277
7e6d3cf wallet: set incoming outputs' key image to 0 on view wallets (moneromooo-monero)
1f9e6a4 wallet: print tx overview on submit_transfer too (moneromooo-monero)
2016-11-01 15:06:51 +02:00
moneromooo-monero
bb560dd814
wallet: new import_outputs/export_outputs commands
The intended use is to export outputs from a hot wallet, which
can scan incoming transfers from the network, and import them
in the cold wallet, which can't. The cold wallet can then compute
key images for those outputs, which can then be exported with
export_key_images, etc.
2016-10-30 19:37:09 +00:00
moneromooo-monero
1f9e6a46d8
wallet: print tx overview on submit_transfer too
This is on the potentially compromised wallet, but still guards
against stupid mistakes.
2016-10-30 10:49:22 +00:00
moneromooo-monero
4bfb81a7f5
simplewallet: remove destinations with zero amount in sign_transfer
This will happen when sending to another address, after removing
the fee.
2016-10-30 09:15:04 +00:00