Commit graph

231 commits

Author SHA1 Message Date
Riccardo Spagni
6b744c349f
Merge pull request #1098
1dd5b0b wallet: keep change dest separate from other dests (moneromooo-monero)
2016-09-18 17:42:32 +02:00
moneromooo-monero
1dd5b0b7df
wallet: keep change dest separate from other dests
This fixes misreporting of amount/fee in rct txes, as the rct
tx construction code was lumping all dests (whether change or
not) in the same dests vector, while the pre-rct code was
keeping it separate.
2016-09-18 12:04:23 +01:00
moneromooo-monero
5f5d7279b6
wallet: fix empty tx in corner case sending nothing 2016-09-18 10:44:32 +01:00
moneromooo-monero
9c7b0cb28e
wallet: change priority/fee to ArticMine's recommendation
We keep 1, 2, 3 multipliers till the fee decrase from 0.01/kB
to 0.002/kB, where we start using 1, 20, 166 multipliers.
This ensures the higher multiplier will compensate for the
block reward penalty when pushing past 100% of the past median.

The fee-multiplier wallet setting is now rename to priority,
since it keeps its [0..3] range, but maps to different multiplier
values.
2016-09-16 11:50:52 +01:00
Riccardo Spagni
7c899ec33a
Merge pull request #1074
cd01bae Decrease minimum fee from 0.01/kB to 0.002/kB (moneromooo-monero)
2016-09-15 15:23:49 +02:00
moneromooo-monero
cd01bae735
Decrease minimum fee from 0.01/kB to 0.002/kB
The wallet will start using that fee about two weeks after hard
fork 3, when most people will likely have updated their daemons.
2016-09-15 09:28:33 +01:00
moneromooo-monero
70b78bb2c8
wallet: fix misdetection of duplicates 2016-09-14 20:23:28 +01:00
luigi1111
34bb78956f
Re-add s to rangesigs
Whoops.
2016-09-01 13:53:53 -05:00
luigi1111
dbf017a5f7
Fix some rct tx size calculations
Some variance is still expected
2016-09-01 13:14:31 -05:00
Riccardo Spagni
27c8713f56
Merge pull request #1027
85dc0ce wallet: sanity check on histogram response (moneromooo-monero)
2016-09-01 11:31:58 +02:00
moneromooo-monero
85dc0ce3a5
wallet: sanity check on histogram response 2016-09-01 09:04:45 +01:00
moneromooo-monero
3112e24aa7
wallet: interpret 0 fee multiplier as default for sweep_all too 2016-08-30 13:19:20 +01:00
moneromooo-monero
73b9b4ba34
wallet: fix not finding enough rct fake outputs
If picking coinbase outputs, those are locked for a longer time
than other outputs, so we ask for more of those
2016-08-29 20:51:21 +01:00
moneromooo-monero
fbd7c359ee
wallet: fix some "may be used uninitialized" warnings
The compiler can't always work out the _found booleans are
set iff the value is initialized.
2016-08-28 21:30:44 +01:00
moneromooo-monero
4a41dd4068
wallet: do not generate 0 change 2016-08-28 21:30:42 +01:00
moneromooo-monero
45349b6f7c
wallet: do not ask for duplicate histograms 2016-08-28 21:30:36 +01:00
moneromooo-monero
b951bc8780
wallet: transfer_selected_rct now also selects fake outs 2016-08-28 21:30:34 +01:00
moneromooo-monero
c3b3260ae5
New "Halfway RingCT" outputs for coinbase transactions
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.

Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
2016-08-28 21:30:26 +01:00
moneromooo-monero
d4b62a1e29
rct amount key modified as per luigi1111's recommendations
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
2016-08-28 21:30:19 +01:00
moneromooo-monero
3ab2ab3e76
rct: change the simple flag to a type
for future expansion
2016-08-28 21:30:14 +01:00
moneromooo-monero
a47ceee83b
wallet: do not store signatures in the wallet cache
Saves some substantial space.
Also avoid calculating tx hashes we don't need.
2016-08-28 21:30:10 +01:00
moneromooo-monero
2c9d9519f1
wallet2: factor m_spent changes
Makes it easier to track what is going on.
2016-08-28 21:30:04 +01:00
moneromooo-monero
230fca2d56
wallet: use the prefered rct case only when enough rct outs exist 2016-08-28 21:29:55 +01:00
moneromooo-monero
c27194a444
wallet: do not try to use rct txes a few blocks before the fork 2016-08-28 21:29:53 +01:00
moneromooo-monero
37bdf6ebe3
change fork settings to allow pre-rct txes for one more fork cycle 2016-08-28 21:29:50 +01:00
moneromooo-monero
9b70856ccb
rct: make the amount key derivable by a third party with the tx key
Scheme design from luigi1114.
2016-08-28 21:29:46 +01:00
moneromooo-monero
cf33e1a52a
rct: do not serialize public keys in outPk
They can be reconstructed from vout
2016-08-28 21:29:43 +01:00
moneromooo-monero
3cb2edec66
rpc: send global indices along with blocks/transacions on refresh
This plugs a privacy leak, where the wallet tells the daemon
which transactions contain outputs for the wallet by asking
for additional information for that particular transaction.

As a nice bonus, this actually makes refresh slightly faster.
2016-08-28 21:29:38 +01:00
moneromooo-monero
84c82cd775
wallet: better tx input selection
We try to avoid related inputs, when possible
2016-08-28 21:29:32 +01:00
moneromooo-monero
07d353dfc6
wallet: handle 0 change properly
With RCT, we allow 0 size outputs, to try and encourage txes
with two inputs and two outputs. Consolidation would then
have two non zero inputs, one zero output, and one larger
output.
2016-08-28 21:29:27 +01:00
moneromooo-monero
e81a2b2cfa
port get_tx_key/check_tx_key to rct 2016-08-28 21:29:24 +01:00
moneromooo-monero
a4d4d6194b
integrate simple rct api 2016-08-28 21:29:20 +01:00
moneromooo-monero
37c895e5e3
wallet: rct specific output selection
Before the normal selection, we attempt to find either one or two
suitable outputs to use as inputs to the rct tx. The intent is that
most rct txes will have one or two inputs, and we want all to look
the same if possible.
When two outputs are needed, we try to find a pair which are not
related (ie, by being from the same or similar block height).
2016-08-28 21:29:11 +01:00
moneromooo-monero
1181c57967
wallet: make sweep_all work with rct txes too 2016-08-28 21:29:09 +01:00
moneromooo-monero
1017a75460
wallet: factor transfer_rct code with transfer code
The "transfer" simplewallet command is renamed to "transfer_original".
"transfer_new" is renamed "transfer", "transfer_rct" is removed,
and the new "transfer" now selects rct or non rct transactions
based on the current block height.
2016-08-28 21:29:05 +01:00
moneromooo-monero
20e50ec7f7
ringct: do not serialize what can be reconstructed
The mixRing (output keys and commitments) and II fields (key images)
can be reconstructed from vin data.
This saves some modest amount of space in the tx.
2016-08-28 21:28:55 +01:00
moneromooo-monero
acbe06d8e9
wallet: update spent status when an accepted tx disappears 2016-08-28 21:28:49 +01:00
moneromooo-monero
089df4af83
wallet: reset output spent status on blockchain reorg
If the blockchain gets reorganized, all outputs spent in the part
of the blockchain that's blown away need to be reset to unspent
(they may end up spent again on the blocks that replace the blocks
that are removed, however).
2016-08-28 21:28:47 +01:00
moneromooo-monero
dc4aad7eb5
add rct to the protocol
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
2016-08-28 21:28:37 +01:00
Riccardo Spagni
79cdedb90c
Merge pull request #970
25f529a wallet: store key images after importing them (moneromooo-monero)
2016-08-22 22:55:24 +02:00
moneromooo-monero
25f529aa67
wallet: store key images after importing them
It avoids rescan_spent resetting spent status, for example.
2016-08-17 08:37:56 +01:00
moneromooo-monero
9cca53ac29
wallet: fix build on Mac and Windows (missing include)
Reported by RaskaRuby, tested by iDunk5400.
2016-08-17 08:08:49 +01:00
Riccardo Spagni
0faf572db8
Merge pull request #948
11dc091 Fake outs set is now decided by the wallet (moneromooo-monero)
1593553 new unlocked parameter to output_histogram (moneromooo-monero)
2016-08-11 22:43:14 +02:00
moneromooo-monero
11dc091464
Fake outs set is now decided by the wallet
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.

This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
2016-08-11 14:35:27 +01:00
moneromooo-monero
663fc32809
wallet2: if importing key images fails, print failure index 2016-08-04 08:19:29 +01:00
moneromooo-monero
1593553e03
new unlocked parameter to output_histogram
This constrains the number of instances of any amount
to the unlocked ones (as defined by the default unlock time
setting: outputs with non default unlock time are not
considered, so may be counted as unlocked even if they are
not actually unlocked).
2016-08-01 22:16:00 +01:00
moneromooo-monero
ebf97d76f0
wallet: new {ex,im}port_key_images commands and RPC calls
They are used to export a signed set of key images from a wallet
with a private spend key, so an auditor with the matching view key
may see which of those are spent, and which are not.
2016-07-24 09:23:30 +01:00
moneromooo-monero
b89b96394a
wallet: add unconfirmed incoming txes from the txpool
Shown in show_transfers simplewallet command, and get_transfers
RPC command, if req.pool is true.
2016-07-20 19:14:44 +01:00
Riccardo Spagni
fc3e135b83
Merge pull request #902
014f3a0 Add a daemon RPC version, and make simplewallet check it (moneromooo-monero)
2016-07-20 13:55:59 +02:00
moneromooo-monero
89d9f382a0
wallet: add command and RPC to sign/verify data
Signing is done using the spend key, since the view key may
be shared. This could be extended later, to let the user choose
which key (even a per tx key).
simplewallet's sign/verify API uses a file. The RPC uses a
string (simplewallet can't easily do strings since commands
receive a tokenized set of arguments).
2016-07-19 20:39:03 +01:00