Commit graph

226 commits

Author SHA1 Message Date
Riccardo Spagni
95ceb715dc
Merge pull request #565
79beed2 tests: fix various tests by using parameters better suited to monero (moneromooo-monero)
d0a8362 tests: fix some double spending tests (moneromooo-monero)
2358d0d tests: use 255 as a "too high" block version (moneromooo-monero)
f33a88c blockchain: fix a few block addition bugs (moneromooo-monero)
a9ff11c blockchain: fix an off by one error in unlocked time check (moneromooo-monero)
f294be3 blockchain: reinstate double spending checks in check_tx_inputs (moneromooo-monero)
737b6d6 blockchain: make some flag twiddling code closer to the original (moneromooo-monero)
81cb0fc blockchain: fix bitflipping test with quantized block rewards (moneromooo-monero)
22ddf09 blockchain: add missing m_tx_pool.on_blockchain_dec (moneromooo-monero)
d837c0c blockchain: fix switch to alternative blockchain for more than one block (moneromooo-monero)
5cec076 blockchain: add a missing validity check to rollback_blockchain_switching (moneromooo-monero)
3cabdb5 core: catch exceptions from get_output_key (moneromooo-monero)
5eef645 db: throw when given a non txout_to_key output to add (moneromooo-monero)
2015-12-26 10:23:17 +02:00
moneromooo-monero
5eef64578b
db: throw when given a non txout_to_key output to add
The check was explicit in the original version, so it seems
safer to make it explicit here, especially as it is now done
implicitely in a different place, away from the original check.
2015-12-25 21:56:37 +00:00
warptangent
d4c2fae2fb
BlockchainDB: Remove txs in reverse order
Data should be removed in the reverse order it was added. Not doing so
breaks assumptions and can cause problems in other DB implementations.

This matches the order of tx removal in
blockchain_storage::purge_block_data_from_blockchain.
2015-12-24 15:09:09 -08:00
warptangent
ffcf6bdb95
BlockchainLMDB: When removing, find amount output index fast by starting at end
This improves blockchain reorganization time by allowing one of the more
expensive DB lookups when popping a block to not have to seek through a
long dup list in the "output_amounts" subdb. This is most noticeable for
HDDs.

As before, the dup list is still walked if necessary (but in reverse),
and the global output index still confirmed to be the one looked for.
But under proper use, the result will be found at the end of the dup
list, so we start there.

Removing an amount output index is always done in the context of popping
a block, so the global output index being looked for should be the last
one in that amount key's dup list. Even if the txs themselves aren't
removed in reverse order (supposed to be according to original
implementation), the specified amount output index will still be near
the end, because the txs are in the same block.

TEST:

Pop blocks with blockchain_import.

Blocks should be successfully removed with no errors shown.

bitmonerod should be able to start syncing from the reduced blockchain
height.
2015-12-24 13:32:35 -08:00
warptangent
f11def012f
BlockchainLMDB: Remove tx outputs in reverse order
Data should be removed in the reverse order it was added.

This matches the order of removal in
blockchain_storage::pop_transaction_from_global_index.
2015-12-24 13:30:12 -08:00
moneromooo-monero
3f2970fadb
Add missing semicolons after log statements 2015-12-19 14:47:37 +00:00
warptangent
725acc7f17
Replace tabs with two spaces for consistency with rest of codebase
Remove trailing whitespace in same files.
2015-12-15 06:22:06 -08:00
moneromooo-monero
d462c62343
db_lmdb: always use a batch tx if possible
Also wrap that code in two prefix/suffix macros so they are
easier to use and not forget. Also add consts to returned data
casts where applicable.
2015-12-14 18:47:13 +00:00
Riccardo Spagni
0eb3b6645c
Merge pull request #532
79ff6a5 Add LMDB error string to database transaction exception message (warptangent)
2015-12-13 22:16:05 +02:00
Riccardo Spagni
bdf738bc7f
Merge pull request #531
cbded43 core_tests: fix ring_signature_1 tests (moneromooo-monero)
c3d208f core_tests: bump default test fee to 0.02 monero (moneromooo-monero)
10da0a0 add a --fakechain argument for tests (moneromooo-monero)
eee44e6 unit_tests: fix block reward test using post hard fork settings (moneromooo-monero)
595893f blockchain: log block (not chain) height in "BLOCK SUCCESFULLY ADDED" (moneromooo-monero)
2369968 blockchain: fix off by one in get_blocks (moneromooo-monero)
8af913a db_lmdb: implement BlockchainLMDB::reset (moneromooo-monero)
4833f4f db_bdb: implement BlockchainBDB::reset (moneromooo-monero)
18bf06e tx_pool: fix "minumim" typo in message (moneromooo-monero)
44f1267 tests: fix a typo in test name (moneromooo-monero)
1494557 db_lmdb: create all needed directories, not just the leaf one (moneromooo-monero)
015b68a db_bdb: create all needed directories, not just the leaf one (moneromooo-monero)
f141869 tests: remove data-dir argument registration (moneromooo-monero)
2015-12-13 22:14:56 +02:00
warptangent
79ff6a5a56
Add LMDB error string to database transaction exception message
When throwing an exception from being unable to begin an LMDB
transaction, include the reason.

It's often been due to a write transaction attempted within a write
transaction (batch mode), but there can be other reasons such as write
transaction attempted while database was opened read only, or
environment's map needs to be resized.
2015-12-13 09:09:46 -08:00
moneromooo-monero
8af913a3d1
db_lmdb: implement BlockchainLMDB::reset
It is needed by the core tests
2015-12-13 11:14:06 +00:00
moneromooo-monero
4833f4f96f
db_bdb: implement BlockchainBDB::reset
It is needed by the core tests
2015-12-13 11:14:00 +00:00
moneromooo-monero
1494557633
db_lmdb: create all needed directories, not just the leaf one 2015-12-13 11:09:43 +00:00
moneromooo-monero
015b68a2be
db_bdb: create all needed directories, not just the leaf one 2015-12-13 11:08:59 +00:00
Howard Chu
d98d5e79cb Fix data refs in read-only txns
Data is only guaranteed to be valid within the lifetime of a txn.
You cannot use data returned from LMDB after the txn ends.
Also, fixed a missing txn.commit BlockchainLMDB::get_tx_unlock_time()
2015-12-10 01:45:40 +00:00
Riccardo Spagni
8a5ba475cb
Merge pull request #524
1c8262c db_bdb: move log_set_config call before open (moneromooo-monero)
2015-12-08 20:11:06 +02:00
Riccardo Spagni
1fc1bfb677
Merge pull request #523
8620b31 db_bdb: support for libdb without DB_FORCESYNC (moneromooo-monero)
2015-12-08 20:10:34 +02:00
moneromooo-monero
1c8262c527
db_bdb: move log_set_config call before open
This is a precaution for older Berkeley DB versions.

- smooth reports an issue running with 4.7:
  DB_ENV->log_set_config: DB_LOG_IN_MEMORY: method not permitted
  after handle's open method
- this works just fine with 5.3
- we do not use DB_LOG_IN_MEMORY, but we use DB_LOG_AUTO_REMOVE
- libdb docs say some flags must be set before open, and some
  may be set at any time, but never say some must be set after
  open
- moving the call to log_set_config before open works with 5.3

Therefore, it seems best to move the call before open.
2015-12-07 19:22:22 +00:00
moneromooo-monero
8620b31019
db_bdb: support for libdb without DB_FORCESYNC 2015-12-07 09:31:53 +00:00
moneromooo-monero
a98e976f9e
blockchain_db: fixup missing key images in early DB version
Early DB versions did not store key images for inputs if the
transaction spending them had no outputs (ie, all fee). This
is not correct, as this would allow these outputs to be double
spent. This was fixed in 533acc30ed
a few months ago, but databases having synced blocks 2021612 and
685498 with a faulty version will be missing those key images
in the spent keys database. This code checks for this, and adds
those key images if they are missing.
2015-12-06 21:55:05 +00:00
moneromooo-monero
a3c5ca077c
blockchain_db: make the indexing base a BlockchainDB virtual function 2015-12-05 18:41:29 +00:00
moneromooo-monero
3bf35e14e3
db_bdb: read 32 bit heights from keys
Keys in Berkeley DB are 32 bits. We don't want to read random
bits in the high part.
2015-12-04 22:25:00 +00:00
moneromooo-monero
1b40952754
Revert "db_bdb: record numbers for recno databases start at 1"
It looks like some of the indices passed to the DB access functions
are already bumped by 1. Moreover, the existing code was not
throwing DB errors with 0 keys, and this is unlikely if it really
was using 0 keys. Last, this patch broke sync from scratch in at
least one case. So I'm calling it bad and reverting it.

This reverts commit bfc97401ae81bb30278a318de7f048c653bf6582.
2015-11-13 09:28:17 +00:00
moneromooo-monero
4f873bcbaa
Remove some old/obsolete/unused code
git history's here if needed to get any of this back
2015-10-27 10:01:20 +00:00
moneromooo-monero
ecf0b83406
db_bdb: add versioning, to detect incompatible format changes 2015-10-26 18:09:55 +00:00
moneromooo-monero
f7e99047e4
db_lmdb: add versioning, to detect incompatible format changes 2015-10-26 18:09:46 +00:00
moneromooo-monero
5f397e4412
Add functions to iterate through blocks, txes, outputs, key images 2015-10-25 12:36:11 +00:00
moneromooo-monero
0a5a5e8597
db_bdb: record numbers for recno databases start at 1 2015-10-25 12:36:06 +00:00
moneromooo-monero
50dfdc057a
db_bdb: DB_KEYEMPTY is also not found for non-top recon fields 2015-10-25 12:35:59 +00:00
moneromooo-monero
572780e335
blockchain_db: use the DNE exceptions where appropriate 2015-10-25 12:35:52 +00:00
moneromooo-monero
791d8cb038
db_bdb: fix hard fork keys
Berkeley DB requires RECNO keys to be 32 bits, and forbids a key
value of 0.
2015-10-04 19:00:37 +01:00
moneromooo-monero
5b11a89a76
hardfork: most state now saved to the DB
There will be a delay on first load of an existing blockchain
as it gets reparsed for this state data.
2015-09-20 18:42:52 +01:00
moneromooo-monero
e63b854967
blockchain_db: match tx addition semantics to original code
The original code removed key images from a tx from the blockchain
when an non to-key nor gen input was found in that tx. Additionally,
the remainder of the tx data was added to the blockchain only after
the double spend check passed.
2015-08-11 11:11:17 +01:00
Riccardo Spagni
b210b304a3
Merge pull request #364
533acc3 blockchain_db: store key images for tx without outputs too (moneromooo-monero)
2015-08-10 20:05:12 +02:00
Riccardo Spagni
09cada45c4
Merge pull request #363
4f19e68 blockchain: factor get_num_outpouts(amount) calls (moneromooo-monero)
275894c blockchain: always select random outs using triangular distribution (moneromooo-monero)
2015-08-10 20:04:32 +02:00
moneromooo-monero
533acc30ed
blockchain_db: store key images for tx without outputs too 2015-08-09 19:26:36 +01:00
moneromooo-monero
275894cdef
blockchain: always select random outs using triangular distribution
It was only used by the older blockchain_storage.
We also move the code to the calling blockchain level, to avoid
replicating the code in every DB implementation. This also makes
the get_random_out method obsolete, and we delete it.
2015-08-09 18:07:44 +01:00
warptangent
525bf5811f
Fix estimation of batch storage size when no blocks exist
If there's no blocks in database (m_height == 0):
  Don't assign incorrect block range to check.
  Skip average block size check.

Test:

Run blockchain_converter with an existing source blockchain.bin and
a non-existent LMDB destination database.

The converter creates a BlockchainLMDB instance with zero height, due to
not being initialized with a genesis block, normally done by
Blockchain::init(). While different than the behavior of bitmonerod,
blockchain_import, and blockchain_export, the initialization hasn't been
strictly necessary.

The db batch size estimation normally uses an average block size, or a
default minimum block size, whichever is greater. In this case, as
there's no existing blocks to check for an average block size, the
default should be used.
2015-08-04 17:11:30 -07:00
warptangent
71793ef43f Add batch support to BlockchainLMDB::get_output_key
This allows blockchain_import to work with batch and verify modes enabled
(the default).
2015-07-16 00:36:26 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
94ea3e8ed2 Removed on_idle() calls to Blockchain::store_blockchain() for lmdb.
Added option to cache tx-input verification results.
2015-07-15 23:20:25 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
2e293a563e Fixed binary size issue due to embedded checkpoint data.
Fixed OSX compilation issues due to random lmdb resize points.
Fixed infinite loop bug when calling core::get_block_template(..).
2015-07-15 23:20:20 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
e5d2680094 ** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).

Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.

LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5

ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.

[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
   This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.

[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
	a. 0 = Compute long hash per block (may take a while depending on CPU)
	b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
	a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
	b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
	Fast    - Write meta-data but defer data flush.
	Fastest - Defer meta-data and data flush.
	Sync    - Flush data after nblocks_per_sync and wait.
	Async   - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
        Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
	Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
	For berkeley-db only. Auto remove logs if enabled.

**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
	At the moment, you need a full resync to use this optimized version.

[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.

Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block

**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop,   Dual-core / 4-threads U4200  (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).

lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop,  Quad-core / 8-threads 2600k  (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k  (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).

berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-15 23:20:16 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
3381fd69a8 Update db_bdb.cpp
- bugfix: prevent re-entering db->get when current buffer contains all possible index values.
2015-07-15 23:20:13 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
dbbc457836 Update db_bdb.cpp 2015-07-15 23:20:12 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
4b7ad2b0a7 Update db_bdb.cpp 2015-07-15 23:20:10 -07:00
NoodleDoodleNoodleDoodleNoodleDoodleNoo
da1d3c01de
Experimental BDB workaround optimizations 2015-07-15 21:13:42 -07:00
warptangent
fd73d9cc3a
Check and resize if needed at batch transaction start
This currently only affects blockchain_import and blockchain_converter.

When the number of blocks expected for the batch transaction is
provided, make an estimate of the DB space needed. If not enough free
space remains, resize the DB.

The estimate is made based on:
- the average size of the last 500 blocks, or if larger, a min. block
  size of 4k
- a factor for the expanded size a block occupies in the DB across the
  sub-dbs/tables
- a safety factor (1.7) to allow for a "reasonable" average block size
  increase over the batch

Increase the DB size by whichever is greater: the estimated size needed
or a minimum increase size, currently 128 MB.

The conservative factors in the estimate help in testing that the resize
occurs when needed, and without gratuitous size increases. For common
use, the safety factor and minimum increase size could reasonably be
increased.

For testing, setting DEFAULT_MAPSIZE (blockchain_db/lmdb/db_lmdb.h) to 1
<< 27 (128 MB) and recompiling will ensure DB resizes take place sooner
and more frequently.
2015-07-12 00:51:39 -07:00
warptangent
6e170c8b78
Optionally allow DB to know expected number of blocks at batch transaction start
This will assist in a DB resize check.
2015-07-11 23:54:12 -07:00
Riccardo Spagni
6aee052001
Merge pull request #297
5680604 Replace hardcoded value with existing constant of same value (warptangent)
f37ee2f Update database resize behavior (warptangent)
f85cd8e Include database error in more error messages (warptangent)
2015-05-30 22:32:23 +02:00
warptangent
5680604437
Replace hardcoded value with existing constant of same value
This was likely the intent.
2015-05-30 09:27:54 -07:00
warptangent
f37ee2f304
Update database resize behavior
On an existing database, don't set LMDB map size to be the initial size
for a new database.

Check if resize is needed at startup.
2015-05-30 09:27:49 -07:00
warptangent
f85cd8e10b
Include database error in more error messages 2015-05-30 09:27:44 -07:00
moneromooo-monero
8069b3ba7f
blockchain_db: add a few const 2015-05-27 19:16:37 +01:00
Riccardo Spagni
634e367ff5
Merge pull request #289
01076ae Check if LMDB needs resize every 1000 blocks (Thomas Winget)
b0d849e null out batch txn pointer as needed (BlockchainLMDB) (Thomas Winget)
7b7ef73 LMDB should now dynamically resize the mapsize (Thomas Winget)
ac79502 Move mdb_txn_safe implementation to cpp file (Thomas Winget)
2015-05-26 10:44:48 +02:00
Thomas Winget
01076ae700
Check if LMDB needs resize every 1000 blocks
(this was 10 for testing purposes)
2015-05-18 06:18:31 -04:00
Thomas Winget
b0d849e0a4
null out batch txn pointer as needed (BlockchainLMDB) 2015-05-18 06:12:54 -04:00
Thomas Winget
7b7ef73c15
LMDB should now dynamically resize the mapsize
Some filesystems (*cough* NTFS *cough*) aren't good with sparse files,
so this makes LMDB dynamically resize its mapsize as needed.  Note: the
check interval is currently every 10 blocks (for testing) and will
probably need to change to 1000 or something.  Default mapsize set to
1GiB.

Blockchain conversion tools using batching will probably segfault, I'll
fix that in the next commit.
2015-05-16 22:05:54 -04:00
warptangent
d35bffb950
Allow BlockchainLMDB to be opened in read-only mode
Have blockchain_export use read-only mode when source is BlockchainLMDB.
2015-05-16 01:34:58 -07:00
Thomas Winget
ac79502308
Move mdb_txn_safe implementation to cpp file 2015-05-15 20:42:47 -04:00
warptangent
71af04669c
Update log statements
Use filesystem path conversion to string() instead of c_str().
Windows may otherwise output an address.
2015-05-08 14:12:06 -07:00
Thomas Winget
9519526224
Only compile BerkeleyDB as an option in non-static 2015-04-07 15:02:20 -04:00
Thomas Winget
7b14d4a17f
Steps toward multiple dbs available -- working
There will need to be some more refactoring for these changes to be
considered complete/correct, but for now it's working.

new daemon cli argument "--db-type", works for LMDB and BerkeleyDB.

A good deal of refactoring is also present in this commit, namely
Blockchain no longer instantiates BlockchainDB, but rather is passed a
pointer to an already-instantiated BlockchainDB on init().
2015-03-25 12:09:44 -04:00
Thomas Winget
ead7fad552
BerkeleyDB implementation of BlockchainDB seems to be working! 2015-03-17 22:12:09 -04:00
Thomas Winget
8e3347f310
Pull blockchain changes into berkeleydb branch 2015-03-17 19:52:53 -04:00
Thomas Winget
e146027acd
BlockchainBDB passes unit tests 2015-03-17 17:18:45 -04:00
Thomas Winget
43477b7dac
BerkeleyDB Blockchain building, not working yet
Everything except actually *using* BlockchainBDB is wired up, but the db
itself is not yet working.  Some error about user mem not large enough.
I think I know what this error means, but I can't determine the cause.

Notes: BerkeleyDB does not allow 0-indexing in its recno type databases,
  so block numbers *in the database* will be 1-indexed.  Modifications
  to indexing have been made as needed.
2015-03-16 09:14:51 -04:00
Thomas Winget
cade0da8f1
CMake wiring, minor cleanup, minor test addition
Make Cmake things aware of BerkeleyDB and BlockchainBDB

Make the BlockchainDB unit tests aware of BlockchainBDB
2015-03-16 04:17:53 -04:00
Thomas Winget
1bc89398b4
BerkeleyDB BlockchainDB impl copy/paste/modify
LMDB implementation code copy/paste/modified into the Berkeley DB
implementation.  Need to test if it builds, then if it works, and so on,
but the code is all there.
2015-03-16 04:17:48 -04:00
Thomas Winget
5112dc37d7
Try to not pollute cryptonote namespace 2015-03-16 04:17:44 -04:00
Thomas Winget
edef0bb771
Initial commit of BDB BlockchainDB implementation
Basically verbatim copy of LMDB implementation, but with the guts ripped
out and includes changed, etc.
2015-03-16 04:17:32 -04:00
warptangent
275cbd4348
Add support for database open with flags
Add support to:
  - BlockchainDB, BlockchainLMDB
  - blockchain_import utility to open LMDB database with one or more
    LMDB flags.

Sample use:
  $ blockchain_import --database lmdb#nosync
  $ blockchain_import --database lmdb#nosync,nometasync
2015-03-16 00:26:59 -07:00
warptangent
cb862cb81a
Add mdb_flags variable to LMDB database open 2015-03-16 00:26:58 -07:00
warptangent
acb5d291b8
Update and relocate comment that applies class wide 2015-03-15 13:22:32 -07:00
Thomas Winget
eee3ee7073
BlockchainDB implementations have names now
In order to make things more general, BlockchainDB now has get_db_name()
which should return a string with the "name" of that type of db.
This "name" will be the subfolder name that holds that db type's files
within the monero folder.

Small bugfix: blockchain_converter was not correctly appending this in
the prior hard-coded-string implementation of the subfolder data
directory concept.
2015-03-13 21:39:27 -04:00
Thomas Winget
5eab480cb1
Moved BlockchainDB into its own src/ subfolder
Ostensibly janitorial work, but should be more relevant later down the
line.  Things that depend on core cryptonote things (i.e.
    cryptonote_core) don't necessarily depend on BlockchainDB and thus
have no need to have BlockchainDB baked in with them.
2015-03-06 15:20:45 -05:00