Commit graph

160 commits

Author SHA1 Message Date
moneromooo-monero
b5d6faada3
wallet: fix bad amounts/fees again
m_amount_out was sometimes getting initialized with the sum of
an transaction's outputs, and sometimes with the sum of outputs
that were not change. This caused confusion and bugs. We now
always set it to the sum of outputs. This reverts an earlier
fix for bad amounts as this used the other semantics. The wallet
data should be converted automatically in a percentage of cases
that I'm hesitant to estimate. In any case, restoring from seed
or keys or rebuilding the cache will get it right.
2016-11-02 23:11:30 +00:00
Riccardo Spagni
d53bc2eddf
Merge pull request #1281
bb560dd wallet: new import_outputs/export_outputs commands (moneromooo-monero)
2016-11-01 15:12:03 +02:00
moneromooo-monero
bb560dd814
wallet: new import_outputs/export_outputs commands
The intended use is to export outputs from a hot wallet, which
can scan incoming transfers from the network, and import them
in the cold wallet, which can't. The cold wallet can then compute
key images for those outputs, which can then be exported with
export_key_images, etc.
2016-10-30 19:37:09 +00:00
moneromooo-monero
7e6d3cf441
wallet: set incoming outputs' key image to 0 on view wallets
This allows rescan_spent to know the daemon response to those
is not valid.
2016-10-30 12:14:33 +00:00
moneromooo-monero
1f9e6a46d8
wallet: print tx overview on submit_transfer too
This is on the potentially compromised wallet, but still guards
against stupid mistakes.
2016-10-30 10:49:22 +00:00
moneromooo-monero
31abac4daf
wallet: fix pre-rct cold wallet signing not splitting change
Re-creating the transaction on the cold wallet was not splitting
the change, causing the transaction to be rejected by the network.
This worked on testnet since amounts do not have to be split.

Also add selected_transfers, which can now be saved since they're
size_t rather than iterators. This allows the view wallet to
properly set the sent outputs as spent and update balance.

Bump transfer file version numbers to match.
2016-10-25 21:44:31 +01:00
Riccardo Spagni
09f62ed33e
Merge pull request #1225
04da979 Always confirm transfers defaults to ON/YES (NanoAkron)
2016-10-22 22:16:39 +02:00
Riccardo Spagni
f800390ccc
Merge pull request #1224
8231997 simplewallet: fix sweep_all misreporting sweeped amount for rct outputs (moneromooo-monero)
985f61a wallet: force 0 mixin transactions to use pre-rct txes (moneromooo-monero)
2016-10-22 22:15:50 +02:00
Riccardo Spagni
b53c9e5549
Merge pull request #1200
a3748f4 Rewrote add_wallet_create_if_needed for clearer flow and behaviour (NanoAkron)
2016-10-22 22:07:38 +02:00
NanoAkron
a3748f40ea
Rewrote add_wallet_create_if_needed for clearer flow and behaviour 2016-10-15 22:29:28 +01:00
NanoAkron
04da979f46
Always confirm transfers defaults to ON/YES 2016-10-15 20:38:07 +01:00
moneromooo-monero
8231997b66
simplewallet: fix sweep_all misreporting sweeped amount for rct outputs
RingCT outputs will be 0 in the vin, so we need to get the actual
amount from elsewhere.
2016-10-15 19:18:52 +01:00
moneromooo-monero
4e6d70808d
wallet: better implementation of sweep_unmixable
This was still using the old transaction creation algorithm,
coupled with a deterministic output selection scheme, which
made it ill suited to the job, since it'd loop indefinitely
in case the fee increased between the test tx and adding the
fee.
2016-10-04 17:44:56 +01:00
Riccardo Spagni
2723cd12e1
Merge pull request #1173
65ea836 wallet2_api: added Wallet::daemonBlockChainTargetHeight() libwallet_api: Wallet::blockChainTargetHeight (Jacob Brydolf)
2016-10-04 12:15:02 +02:00
Riccardo Spagni
bfdac4b5ff
Merge pull request #1160
80b4da3 wallet: wallet option to confirm transfers with no payment id (moneromooo-monero)
2016-10-04 12:11:32 +02:00
Riccardo Spagni
2ef81914b5
Merge pull request #1140
bba6af9 wallet: cold wallet transaction signing (moneromooo-monero)
9872dcb wallet: fix log confusion between bytes and kilobytes (moneromooo-monero)
d9b0bf9 cryptonote_core: make extra field removal more generic (moneromooo-monero)
98f19d4 serialization: add support for serializing std::pair and std::list (moneromooo-monero)
2016-10-04 11:27:38 +02:00
Jacob Brydolf
65ea8364f8 wallet2_api: added Wallet::daemonBlockChainTargetHeight()
libwallet_api: Wallet::blockChainTargetHeight

Signed-off-by: Jacob Brydolf <jacob@brydolf.net>
2016-10-03 20:47:41 +02:00
moneromooo-monero
80b4da3330
wallet: wallet option to confirm transfers with no payment id
set confirm-missing-payment-id 0|1

Defaults to true.
2016-10-01 17:03:53 +01:00
moneromooo-monero
bba6af9064
wallet: cold wallet transaction signing
This change adds the ability to create a new unsigned transaction
from a watch only wallet, and save it to a file. This file can
then be moved to another computer/VM where a cold wallet may load
it, sign it, and save it. That cold wallet does not need to have
a blockchain nor daemon. The signed transaction file can then be
moved back to the watch only wallet, which can load it and send
it to the daemon.

Two new simplewallet commands to use it:
sign_transfer (on the cold wallet)
submit_transfer (on the watch only wallet)

The transfer command used on a watch only wallet now writes an
unsigned transaction set in a file called 'unsigned_monero_tx'
instead of submitting the tx to the daemon as a normal wallet does.
The signed tx file is called 'signed_monero_tx'.
2016-09-27 07:46:39 +01:00
Ilya Kitaev
7b4a85b309 wallet2_api: added Wallet::daemonBlockChainHeight() 2016-09-26 23:19:25 +03:00
moneromooo-monero
9c7b0cb28e
wallet: change priority/fee to ArticMine's recommendation
We keep 1, 2, 3 multipliers till the fee decrase from 0.01/kB
to 0.002/kB, where we start using 1, 20, 166 multipliers.
This ensures the higher multiplier will compensate for the
block reward penalty when pushing past 100% of the past median.

The fee-multiplier wallet setting is now rename to priority,
since it keeps its [0..3] range, but maps to different multiplier
values.
2016-09-16 11:50:52 +01:00
moneromooo-monero
cd01bae735
Decrease minimum fee from 0.01/kB to 0.002/kB
The wallet will start using that fee about two weeks after hard
fork 3, when most people will likely have updated their daemons.
2016-09-15 09:28:33 +01:00
moneromooo-monero
b951bc8780
wallet: transfer_selected_rct now also selects fake outs 2016-08-28 21:30:34 +01:00
moneromooo-monero
c3b3260ae5
New "Halfway RingCT" outputs for coinbase transactions
When RingCT is enabled, outputs from coinbase transactions
are created as a single output, and stored as RingCT output,
with a fake mask. Their amount is not hidden on the blockchain
itself, but they are then able to be used as fake inputs in
a RingCT ring. Since the output amounts are hidden, their
"dustiness" is not an obstacle anymore to mixing, and this
makes the coinbase transactions a lot smaller, as well as
helping the TXO set to grow more slowly.

Also add a new "Null" type of rct signature, which decreases
the size required when no signatures are to be stored, as
in a coinbase tx.
2016-08-28 21:30:26 +01:00
moneromooo-monero
d4b62a1e29
rct amount key modified as per luigi1111's recommendations
This allows the key to be not the same for two outputs sent to
the same address (eg, if you pay yourself, and also get change
back). Also remove the key amounts lists and return parameters
since we don't actually generate random ones, so we don't need
to save them as we can recalculate them when needed if we have
the correct keys.
2016-08-28 21:30:19 +01:00
moneromooo-monero
a47ceee83b
wallet: do not store signatures in the wallet cache
Saves some substantial space.
Also avoid calculating tx hashes we don't need.
2016-08-28 21:30:10 +01:00
moneromooo-monero
2c9d9519f1
wallet2: factor m_spent changes
Makes it easier to track what is going on.
2016-08-28 21:30:04 +01:00
moneromooo-monero
230fca2d56
wallet: use the prefered rct case only when enough rct outs exist 2016-08-28 21:29:55 +01:00
moneromooo-monero
c27194a444
wallet: do not try to use rct txes a few blocks before the fork 2016-08-28 21:29:53 +01:00
moneromooo-monero
9b70856ccb
rct: make the amount key derivable by a third party with the tx key
Scheme design from luigi1114.
2016-08-28 21:29:46 +01:00
moneromooo-monero
3cb2edec66
rpc: send global indices along with blocks/transacions on refresh
This plugs a privacy leak, where the wallet tells the daemon
which transactions contain outputs for the wallet by asking
for additional information for that particular transaction.

As a nice bonus, this actually makes refresh slightly faster.
2016-08-28 21:29:38 +01:00
moneromooo-monero
84c82cd775
wallet: better tx input selection
We try to avoid related inputs, when possible
2016-08-28 21:29:32 +01:00
moneromooo-monero
e81a2b2cfa
port get_tx_key/check_tx_key to rct 2016-08-28 21:29:24 +01:00
moneromooo-monero
37c895e5e3
wallet: rct specific output selection
Before the normal selection, we attempt to find either one or two
suitable outputs to use as inputs to the rct tx. The intent is that
most rct txes will have one or two inputs, and we want all to look
the same if possible.
When two outputs are needed, we try to find a pair which are not
related (ie, by being from the same or similar block height).
2016-08-28 21:29:11 +01:00
moneromooo-monero
1017a75460
wallet: factor transfer_rct code with transfer code
The "transfer" simplewallet command is renamed to "transfer_original".
"transfer_new" is renamed "transfer", "transfer_rct" is removed,
and the new "transfer" now selects rct or non rct transactions
based on the current block height.
2016-08-28 21:29:05 +01:00
moneromooo-monero
089df4af83
wallet: reset output spent status on blockchain reorg
If the blockchain gets reorganized, all outputs spent in the part
of the blockchain that's blown away need to be reset to unspent
(they may end up spent again on the blocks that replace the blocks
that are removed, however).
2016-08-28 21:28:47 +01:00
moneromooo-monero
dc4aad7eb5
add rct to the protocol
It is not yet constrained to a fork, so don't use on the real network
or you'll be orphaned or rejected.
2016-08-28 21:28:37 +01:00
moneromooo-monero
11dc091464
Fake outs set is now decided by the wallet
This plugs a privacy leak from the wallet to the daemon,
as the daemon could previously see what input is included
as a transaction input, which the daemon hadn't previously
supplied. Now, the wallet requests a particular set of
outputs, including the real one.

This can result in transactions that can't be accepted if
the wallet happens to select too many outputs with non standard
unlock times. The daemon could know this and select another
output, but the wallet is blind to it. It's currently very
unlikely since I don't think anything uses non default
unlock times. The wallet requests more outputs than necessary
so it can use spares if any of the returns outputs are still
locked. If there are not enough spares to reach the desired
mixin, the transaction will fail.
2016-08-11 14:35:27 +01:00
moneromooo-monero
1593553e03
new unlocked parameter to output_histogram
This constrains the number of instances of any amount
to the unlocked ones (as defined by the default unlock time
setting: outputs with non default unlock time are not
considered, so may be counted as unlocked even if they are
not actually unlocked).
2016-08-01 22:16:00 +01:00
moneromooo-monero
ebf97d76f0
wallet: new {ex,im}port_key_images commands and RPC calls
They are used to export a signed set of key images from a wallet
with a private spend key, so an auditor with the matching view key
may see which of those are spent, and which are not.
2016-07-24 09:23:30 +01:00
moneromooo-monero
b89b96394a
wallet: add unconfirmed incoming txes from the txpool
Shown in show_transfers simplewallet command, and get_transfers
RPC command, if req.pool is true.
2016-07-20 19:14:44 +01:00
Riccardo Spagni
fc3e135b83
Merge pull request #902
014f3a0 Add a daemon RPC version, and make simplewallet check it (moneromooo-monero)
2016-07-20 13:55:59 +02:00
moneromooo-monero
89d9f382a0
wallet: add command and RPC to sign/verify data
Signing is done using the spend key, since the view key may
be shared. This could be extended later, to let the user choose
which key (even a per tx key).
simplewallet's sign/verify API uses a file. The RPC uses a
string (simplewallet can't easily do strings since commands
receive a tokenized set of arguments).
2016-07-19 20:39:03 +01:00
moneromooo-monero
014f3a0d39
Add a daemon RPC version, and make simplewallet check it
If the version is different, simplewallet will refuse to use that
daemon, unless --allow-mismatched-daemon-version is used.
2016-07-10 16:49:40 +01:00
Riccardo Spagni
3923cbddaf
Merge pull request #878
945c272 wallet: add a fee multiplier (moneromooo-monero)
2016-07-06 18:14:34 +02:00
moneromooo-monero
945c272f6c
wallet: add a fee multiplier
Fee can now be multiplied by 2 or 3, if users want to give
priority to their transactions. There are only three levels
to avoid too much fingerprinting. Default is 1 (minimum fee).
The default multiplier can be set by "set fee-multiplier X".
2016-06-22 22:21:30 +01:00
Ilya Kitaev
eec0f57d60 Typo fixed 2016-06-22 14:37:53 +03:00
Ilya Kitaev
2facbe77e4 Wallet API : WalletManager::findWallets() added 2016-06-03 14:52:58 +03:00
Ilya Kitaev
bc4584c1ff Merge remote-tracking branch 'upstream/master' 2016-05-27 11:33:08 +03:00
Ilya Kitaev
ff52c67aa9 i_wallet_callback: virtual dtor 2016-05-13 12:59:29 +03:00