Add instructions to README.md for building on the Raspberry Pi 2

This commit is contained in:
NanoAkron 2016-10-28 14:51:35 +01:00
parent 18e406a0e6
commit 145d0b78ef
No known key found for this signature in database
GPG key ID: 346A337AA2EA8B57

View file

@ -145,7 +145,11 @@ invokes cmake commands as needed.
this to be worthwhile, the machine should have one core and about 2GB of RAM this to be worthwhile, the machine should have one core and about 2GB of RAM
available per thread. available per thread.
* The resulting executables can be found in `build/release/bin`. * The resulting executables can be found in `build/release/bin`
* Add `PATH="$PATH:$HOME/monero/build/release/bin"` to `.profile`
* Run Monero with `monerod --detach`
* **Optional**: build and run the test suite to verify the binaries: * **Optional**: build and run the test suite to verify the binaries:
@ -165,6 +169,50 @@ invokes cmake commands as needed.
HAVE_DOT=YES doxygen Doxyfile HAVE_DOT=YES doxygen Doxyfile
#### On the Raspberry Pi
Tested on a Raspberry Pi 2 with a clean install of minimal Debian Jessie from https://www.raspberrypi.org/downloads/raspbian/
* `apt-get update` and `apt-get upgrade` to install all of the latest software
* Install the dependencies for Monero except libunwind and libboost-all-dev
* Increase the system swap size
sudo /etc/init.d/dphys-swapfile stop
sudo nano /etc/dphys-swapfile
CONF_SWAPSIZE=1024
sudo /etc/init.d/dphys-swapfile start
* Install the latest version of boost (this may first require invoking `apt-get remove --purge libboost*` to remove a previous version if you're not using a clean install)
cd
wget https://sourceforge.net/projects/boost/files/boost/1.62.0/boost_1_62_0.tar.bz2
tar xvfo boost_1_62_0.tar.bz2
cd boost_1_62_0
./bootstrap.sh
sudo ./b2
* Wait ~8 hours
sudo ./bjam install
* Wait ~4 hours
* Change to the root of the source code directory and build:
cd monero
make release
* Wait ~4 hours
* The resulting executables can be found in `build/release/bin`
* Add `PATH="$PATH:$HOME/monero/build/release/bin"` to `.profile`
* Run Monero with `monerod --detach`
* You may wish to reduce the size of the swap file after the build has finished, and delete the boost directory from your home directory
#### On Windows: #### On Windows: