2018-01-03 11:17:50 +00:00
// Copyright (c) 2014-2017, The Monero Project, The Danicoin Project
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// All rights reserved.
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// 1. Redistributions of source code must retain the above copyright notice, this list of
// conditions and the following disclaimer.
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
// of conditions and the following disclaimer in the documentation and/or other
// materials provided with the distribution.
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// 3. Neither the name of the copyright holder nor the names of its contributors may be
// used to endorse or promote products derived from this software without specific
// prior written permission.
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
2015-12-14 04:54:39 +00:00
//
2014-07-23 13:03:52 +00:00
// Parts of this file are originally copyright (c) 2012-2013 The Cryptonote developers
2014-03-03 22:07:58 +00:00
2015-11-23 17:34:55 +00:00
// IP blocking adapted from Boolberry
2014-03-03 22:07:58 +00:00
#pragma once
2014-05-25 17:06:40 +00:00
#include <algorithm>
2014-12-15 22:23:42 +00:00
#include <boost/date_time/posix_time/posix_time.hpp>
2015-12-14 04:54:39 +00:00
#include <boost/thread/thread.hpp>
2014-12-15 22:23:42 +00:00
#include <atomic>
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
#include "version.h"
#include "string_tools.h"
#include "common/util.h"
2014-09-17 21:25:19 +00:00
#include "common/dns_utils.h"
2014-03-03 22:07:58 +00:00
#include "net/net_helper.h"
#include "math_helper.h"
#include "p2p_protocol_defs.h"
#include "net_peerlist_boost_serialization.h"
#include "net/local_ip.h"
#include "crypto/crypto.h"
#include "storages/levin_abstract_invoke2.h"
2014-09-10 18:01:30 +00:00
// We have to look for miniupnpc headers in different places, dependent on if its compiled or external
#ifdef UPNP_STATIC
2014-12-15 22:23:42 +00:00
#include <miniupnpc/miniupnpc.h>
#include <miniupnpc/upnpcommands.h>
#include <miniupnpc/upnperrors.h>
2014-09-10 18:01:30 +00:00
#else
2014-12-15 22:23:42 +00:00
#include "miniupnpc.h"
#include "upnpcommands.h"
#include "upnperrors.h"
2014-09-10 18:01:30 +00:00
#endif
2014-04-09 12:14:35 +00:00
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
#undef MONERO_DEFAULT_LOG_CATEGORY
#define MONERO_DEFAULT_LOG_CATEGORY "net.p2p"
2014-03-03 22:07:58 +00:00
#define NET_MAKE_IP(b1,b2,b3,b4) ((LPARAM)(((DWORD)(b1)<<24)+((DWORD)(b2)<<16)+((DWORD)(b3)<<8)+((DWORD)(b4))))
2017-03-17 23:39:47 +00:00
#define MIN_WANTED_SEED_NODES 12
2014-03-03 22:07:58 +00:00
namespace nodetool
{
namespace
{
** CHANGES ARE EXPERIMENTAL (FOR TESTING ONLY)
Bockchain:
1. Optim: Multi-thread long-hash computation when encountering groups of blocks.
2. Optim: Cache verified txs and return result from cache instead of re-checking whenever possible.
3. Optim: Preload output-keys when encoutering groups of blocks. Sort by amount and global-index before bulk querying database and multi-thread when possible.
4. Optim: Disable double spend check on block verification, double spend is already detected when trying to add blocks.
5. Optim: Multi-thread signature computation whenever possible.
6. Patch: Disable locking (recursive mutex) on called functions from check_tx_inputs which causes slowdowns (only seems to happen on ubuntu/VMs??? Reason: TBD)
7. Optim: Removed looped full-tx hash computation when retrieving transactions from pool (???).
8. Optim: Cache difficulty/timestamps (735 blocks) for next-difficulty calculations so that only 2 db reads per new block is needed when a new block arrives (instead of 1470 reads).
Berkeley-DB:
1. Fix: 32-bit data errors causing wrong output global indices and failure to send blocks to peers (etc).
2. Fix: Unable to pop blocks on reorganize due to transaction errors.
3. Patch: Large number of transaction aborts when running multi-threaded bulk queries.
4. Patch: Insufficient locks error when running full sync.
5. Patch: Incorrect db stats when returning from an immediate exit from "pop block" operation.
6. Optim: Add bulk queries to get output global indices.
7. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
8. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
9. Optim: Added thread-safe buffers used when multi-threading bulk queries.
10. Optim: Added support for nosync/write_nosync options for improved performance (*see --db-sync-mode option for details)
11. Mod: Added checkpoint thread and auto-remove-logs option.
12. *Now usable on 32-bit systems like RPI2.
LMDB:
1. Optim: Added custom comparison for 256-bit key tables (minor speed-up, TBD: get actual effect)
2. Optim: Modified output_keys table to store public_key+unlock_time+height for single transaction lookup (vs 3)
3. Optim: Used output_keys table retrieve public_keys instead of going through output_amounts->output_txs+output_indices->txs->output:public_key
4. Optim: Added support for sync/writemap options for improved performance (*see --db-sync-mode option for details)
5. Mod: Auto resize to +1GB instead of multiplier x1.5
ETC:
1. Minor optimizations for slow-hash for ARM (RPI2). Incomplete.
2. Fix: 32-bit saturation bug when computing next difficulty on large blocks.
[PENDING ISSUES]
1. Berkely db has a very slow "pop-block" operation. This is very noticeable on the RPI2 as it sometimes takes > 10 MINUTES to pop a block during reorganization.
This does not happen very often however, most reorgs seem to take a few seconds but it possibly depends on the number of outputs present. TBD.
2. Berkeley db, possible bug "unable to allocate memory". TBD.
[NEW OPTIONS] (*Currently all enabled for testing purposes)
1. --fast-block-sync arg=[0:1] (default: 1)
a. 0 = Compute long hash per block (may take a while depending on CPU)
b. 1 = Skip long-hash and verify blocks based on embedded known good block hashes (faster, minimal CPU dependence)
2. --db-sync-mode arg=[[safe|fast|fastest]:[sync|async]:[nblocks_per_sync]] (default: fastest:async:1000)
a. safe = fdatasync/fsync (or equivalent) per stored block. Very slow, but safest option to protect against power-out/crash conditions.
b. fast/fastest = Enables asynchronous fdatasync/fsync (or equivalent). Useful for battery operated devices or STABLE systems with UPS and/or systems with battery backed write cache/solid state cache.
Fast - Write meta-data but defer data flush.
Fastest - Defer meta-data and data flush.
Sync - Flush data after nblocks_per_sync and wait.
Async - Flush data after nblocks_per_sync but do not wait for the operation to finish.
3. --prep-blocks-threads arg=[n] (default: 4 or system max threads, whichever is lower)
Max number of threads to use when computing long-hash in groups.
4. --show-time-stats arg=[0:1] (default: 1)
Show benchmark related time stats.
5. --db-auto-remove-logs arg=[0:1] (default: 1)
For berkeley-db only. Auto remove logs if enabled.
**Note: lmdb and berkeley-db have changes to the tables and are not compatible with official git head version.
At the moment, you need a full resync to use this optimized version.
[PERFORMANCE COMPARISON]
**Some figures are approximations only.
Using a baseline machine of an i7-2600K+SSD+(with full pow computation):
1. The optimized lmdb/blockhain core can process blocks up to 585K for ~1.25 hours + download time, so it usually takes 2.5 hours to sync the full chain.
2. The current head with memory can process blocks up to 585K for ~4.2 hours + download time, so it usually takes 5.5 hours to sync the full chain.
3. The current head with lmdb can process blocks up to 585K for ~32 hours + download time and usually takes 36 hours to sync the full chain.
Averate procesing times (with full pow computation):
lmdb-optimized:
1. tx_ave = 2.5 ms / tx
2. block_ave = 5.87 ms / block
memory-official-repo:
1. tx_ave = 8.85 ms / tx
2. block_ave = 19.68 ms / block
lmdb-official-repo (0f4a036437fd41a5498ee5e74e2422ea6177aa3e)
1. tx_ave = 47.8 ms / tx
2. block_ave = 64.2 ms / block
**Note: The following data denotes processing times only (does not include p2p download time)
lmdb-optimized processing times (with full pow computation):
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.25 hours processing time (--db-sync-mode=fastest:async:1000).
2. Laptop, Dual-core / 4-threads U4200 (3Mb) - 4.90 hours processing time (--db-sync-mode=fastest:async:1000).
3. Embedded, Quad-core / 4-threads Z3735F (2x1Mb) - 12.0 hours processing time (--db-sync-mode=fastest:async:1000).
lmdb-optimized processing times (with per-block-checkpoint)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 10 minutes processing time (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with full pow computation)
1. Desktop, Quad-core / 8-threads 2600k (8Mb) - 1.8 hours processing time (--db-sync-mode=fastest:async:1000).
2. RPI2. Improved from estimated 3 months(???) into 2.5 days (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
berkeley-db optimized processing times (with per-block-checkpoint)
1. RPI2. 12-15 hours (*Need 2AMP supply + Clock:1Ghz + [usb+ssd] to achieve this speed) (--db-sync-mode=fastest:async:1000).
2015-07-10 20:09:32 +00:00
const int64_t default_limit_up = 2048;
const int64_t default_limit_down = 8192;
2014-03-03 22:07:58 +00:00
const command_line::arg_descriptor<std::string> arg_p2p_bind_ip = {"p2p-bind-ip", "Interface for p2p network protocol", "0.0.0.0"};
2014-09-08 16:51:04 +00:00
const command_line::arg_descriptor<std::string> arg_p2p_bind_port = {
"p2p-bind-port"
, "Port for p2p network protocol"
, std::to_string(config::P2P_DEFAULT_PORT)
};
const command_line::arg_descriptor<std::string> arg_testnet_p2p_bind_port = {
"testnet-p2p-bind-port"
, "Port for testnet p2p network protocol"
, std::to_string(config::testnet::P2P_DEFAULT_PORT)
};
2014-03-03 22:07:58 +00:00
const command_line::arg_descriptor<uint32_t> arg_p2p_external_port = {"p2p-external-port", "External port for p2p network protocol (if port forwarding used with NAT)", 0};
const command_line::arg_descriptor<bool> arg_p2p_allow_local_ip = {"allow-local-ip", "Allow local ip add to peer list, mostly in debug purposes"};
const command_line::arg_descriptor<std::vector<std::string> > arg_p2p_add_peer = {"add-peer", "Manually add peer to local peerlist"};
const command_line::arg_descriptor<std::vector<std::string> > arg_p2p_add_priority_node = {"add-priority-node", "Specify list of peers to connect to and attempt to keep the connection open"};
2014-05-25 17:06:40 +00:00
const command_line::arg_descriptor<std::vector<std::string> > arg_p2p_add_exclusive_node = {"add-exclusive-node", "Specify list of peers to connect to only."
" If this option is given the options add-priority-node and seed-node are ignored"};
2014-03-03 22:07:58 +00:00
const command_line::arg_descriptor<std::vector<std::string> > arg_p2p_seed_node = {"seed-node", "Connect to a node to retrieve peer addresses, and disconnect"};
2014-05-25 17:06:40 +00:00
const command_line::arg_descriptor<bool> arg_p2p_hide_my_port = {"hide-my-port", "Do not announce yourself as peerlist candidate", false, true};
2015-12-14 04:54:39 +00:00
const command_line::arg_descriptor<bool> arg_no_igd = {"no-igd", "Disable UPnP port mapping"};
const command_line::arg_descriptor<bool> arg_offline = {"offline", "Do not listen for peers, nor connect to any"};
2016-01-14 22:13:12 +00:00
const command_line::arg_descriptor<int64_t> arg_out_peers = {"out-peers", "set max number of out peers", -1};
2015-12-14 04:54:39 +00:00
const command_line::arg_descriptor<int> arg_tos_flag = {"tos-flag", "set TOS flag", -1};
const command_line::arg_descriptor<int64_t> arg_limit_rate_up = {"limit-rate-up", "set limit-rate-up [kB/s]", -1};
const command_line::arg_descriptor<int64_t> arg_limit_rate_down = {"limit-rate-down", "set limit-rate-down [kB/s]", -1};
const command_line::arg_descriptor<int64_t> arg_limit_rate = {"limit-rate", "set limit-rate [kB/s]", -1};
const command_line::arg_descriptor<bool> arg_save_graph = {"save-graph", "Save data for dr monero", false};
2014-05-25 17:06:40 +00:00
}
2014-03-03 22:07:58 +00:00
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
void node_server<t_payload_net_handler>::init_options(boost::program_options::options_description& desc)
{
command_line::add_arg(desc, arg_p2p_bind_ip);
2017-02-09 21:29:35 +00:00
command_line::add_arg(desc, arg_p2p_bind_port, false);
command_line::add_arg(desc, arg_testnet_p2p_bind_port, false);
2014-03-03 22:07:58 +00:00
command_line::add_arg(desc, arg_p2p_external_port);
command_line::add_arg(desc, arg_p2p_allow_local_ip);
command_line::add_arg(desc, arg_p2p_add_peer);
command_line::add_arg(desc, arg_p2p_add_priority_node);
2014-05-25 17:06:40 +00:00
command_line::add_arg(desc, arg_p2p_add_exclusive_node);
2015-12-14 04:54:39 +00:00
command_line::add_arg(desc, arg_p2p_seed_node);
2015-01-05 19:30:17 +00:00
command_line::add_arg(desc, arg_p2p_hide_my_port);
command_line::add_arg(desc, arg_no_igd);
2015-12-07 20:21:45 +00:00
command_line::add_arg(desc, arg_offline);
2015-01-05 19:30:17 +00:00
command_line::add_arg(desc, arg_out_peers);
command_line::add_arg(desc, arg_tos_flag);
command_line::add_arg(desc, arg_limit_rate_up);
2015-05-06 16:10:51 +00:00
command_line::add_arg(desc, arg_limit_rate_down);
command_line::add_arg(desc, arg_limit_rate);
command_line::add_arg(desc, arg_save_graph);
2015-04-01 17:00:45 +00:00
}
2014-03-03 22:07:58 +00:00
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::init_config()
{
//
TRY_ENTRY();
std::string state_file_path = m_config_folder + "/" + P2P_NET_DATA_FILENAME;
std::ifstream p2p_data;
p2p_data.open( state_file_path , std::ios_base::binary | std::ios_base::in);
if(!p2p_data.fail())
{
2015-12-07 00:20:00 +00:00
try
{
2016-12-20 04:04:19 +00:00
// first try reading in portable mode
boost::archive::portable_binary_iarchive a(p2p_data);
2015-12-07 00:20:00 +00:00
a >> *this;
}
2016-12-20 04:04:19 +00:00
catch (...)
2015-12-07 00:20:00 +00:00
{
2016-12-20 04:04:19 +00:00
// if failed, try reading in unportable mode
boost::filesystem::copy_file(state_file_path, state_file_path + ".unportable", boost::filesystem::copy_option::overwrite_if_exists);
p2p_data.close();
p2p_data.open( state_file_path , std::ios_base::binary | std::ios_base::in);
if(!p2p_data.fail())
{
try
{
boost::archive::binary_iarchive a(p2p_data);
a >> *this;
}
catch (const std::exception &e)
{
2017-08-01 09:39:36 +00:00
MWARNING("Failed to load p2p config file, falling back to default config");
2016-12-20 04:04:19 +00:00
m_peerlist = peerlist_manager(); // it was probably half clobbered by the failed load
make_default_config();
}
}
else
{
make_default_config();
}
2015-12-07 00:20:00 +00:00
}
2014-03-03 22:07:58 +00:00
}else
{
make_default_config();
}
2017-01-22 11:37:55 +00:00
// always recreate a new peer id
make_default_peer_id();
2014-03-03 22:07:58 +00:00
//at this moment we have hardcoded config
m_config.m_net_config.handshake_interval = P2P_DEFAULT_HANDSHAKE_INTERVAL;
m_config.m_net_config.packet_max_size = P2P_DEFAULT_PACKET_MAX_SIZE; //20 MB limit
m_config.m_net_config.config_id = 0; // initial config
m_config.m_net_config.connection_timeout = P2P_DEFAULT_CONNECTION_TIMEOUT;
m_config.m_net_config.ping_connection_timeout = P2P_DEFAULT_PING_CONNECTION_TIMEOUT;
m_config.m_net_config.send_peerlist_sz = P2P_DEFAULT_PEERS_IN_HANDSHAKE;
2016-10-26 19:00:08 +00:00
m_config.m_support_flags = P2P_SUPPORT_FLAGS;
2014-03-03 22:07:58 +00:00
m_first_connection_maker_call = true;
CATCH_ENTRY_L0("node_server::init_config", false);
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2016-10-26 19:00:08 +00:00
void node_server<t_payload_net_handler>::for_each_connection(std::function<bool(typename t_payload_net_handler::connection_context&, peerid_type, uint32_t)> f)
2014-03-03 22:07:58 +00:00
{
m_net_server.get_config_object().foreach_connection([&](p2p_connection_context& cntx){
2016-10-26 19:00:08 +00:00
return f(cntx, cntx.peer_id, cntx.support_flags);
2014-03-03 22:07:58 +00:00
});
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-07-02 21:41:15 +00:00
bool node_server<t_payload_net_handler>::for_connection(const boost::uuids::uuid &connection_id, std::function<bool(typename t_payload_net_handler::connection_context&, peerid_type, uint32_t)> f)
{
return m_net_server.get_config_object().for_connection(connection_id, [&](p2p_connection_context& cntx){
return f(cntx, cntx.peer_id, cntx.support_flags);
});
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::is_remote_host_allowed(const epee::net_utils::network_address &address)
2015-11-23 17:34:55 +00:00
{
2017-05-27 10:35:54 +00:00
CRITICAL_REGION_LOCAL(m_blocked_hosts_lock);
auto it = m_blocked_hosts.find(address.host_str());
if(it == m_blocked_hosts.end())
2015-11-23 17:34:55 +00:00
return true;
2015-11-25 22:04:27 +00:00
if(time(nullptr) >= it->second)
2015-11-23 17:34:55 +00:00
{
2017-05-27 10:35:54 +00:00
m_blocked_hosts.erase(it);
MCLOG_CYAN(el::Level::Info, "global", "Host " << address.host_str() << " unblocked.");
2015-11-23 17:34:55 +00:00
return true;
}
return false;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-01-22 11:37:55 +00:00
bool node_server<t_payload_net_handler>::make_default_peer_id()
2014-03-03 22:07:58 +00:00
{
m_config.m_peer_id = crypto::rand<uint64_t>();
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-01-22 11:37:55 +00:00
bool node_server<t_payload_net_handler>::make_default_config()
{
return make_default_peer_id();
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::block_host(const epee::net_utils::network_address &addr, time_t seconds)
2015-11-23 17:34:55 +00:00
{
2017-05-27 10:35:54 +00:00
CRITICAL_REGION_LOCAL(m_blocked_hosts_lock);
m_blocked_hosts[addr.host_str()] = time(nullptr) + seconds;
2016-10-02 16:39:21 +00:00
// drop any connection to that IP
2016-12-03 11:20:48 +00:00
std::list<boost::uuids::uuid> conns;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
2016-10-02 16:39:21 +00:00
{
2017-05-27 10:35:54 +00:00
if (cntxt.m_remote_address.is_same_host(addr))
2016-10-02 16:39:21 +00:00
{
2016-12-03 11:20:48 +00:00
conns.push_back(cntxt.m_connection_id);
2016-10-02 16:39:21 +00:00
}
return true;
2016-12-03 11:20:48 +00:00
});
for (const auto &c: conns)
m_net_server.get_config_object().close(c);
2016-10-02 16:39:21 +00:00
2017-05-27 10:35:54 +00:00
MCLOG_CYAN(el::Level::Info, "global", "Host " << addr.host_str() << " blocked.");
2015-11-23 17:34:55 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::unblock_host(const epee::net_utils::network_address &address)
2015-11-26 00:04:22 +00:00
{
2017-05-27 10:35:54 +00:00
CRITICAL_REGION_LOCAL(m_blocked_hosts_lock);
auto i = m_blocked_hosts.find(address.host_str());
if (i == m_blocked_hosts.end())
2015-11-26 00:04:22 +00:00
return false;
2017-05-27 10:35:54 +00:00
m_blocked_hosts.erase(i);
MCLOG_CYAN(el::Level::Info, "global", "Host " << address.host_str() << " unblocked.");
2015-11-26 00:04:22 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::add_host_fail(const epee::net_utils::network_address &address)
2015-11-23 17:34:55 +00:00
{
2017-05-27 10:35:54 +00:00
CRITICAL_REGION_LOCAL(m_host_fails_score_lock);
uint64_t fails = ++m_host_fails_score[address.host_str()];
MDEBUG("Host " << address.host_str() << " fail score=" << fails);
2015-11-23 17:34:55 +00:00
if(fails > P2P_IP_FAILS_BEFORE_BLOCK)
{
2017-05-27 10:35:54 +00:00
auto it = m_host_fails_score.find(address.host_str());
CHECK_AND_ASSERT_MES(it != m_host_fails_score.end(), false, "internal error");
2015-11-23 17:34:55 +00:00
it->second = P2P_IP_FAILS_BEFORE_BLOCK/2;
2017-05-27 10:35:54 +00:00
block_host(address);
2015-11-23 17:34:55 +00:00
}
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::parse_peer_from_string(epee::net_utils::network_address& pe, const std::string& node_addr, uint16_t default_port)
2014-03-03 22:07:58 +00:00
{
2017-05-27 10:35:54 +00:00
return epee::net_utils::create_network_address(pe, node_addr, default_port);
2014-03-03 22:07:58 +00:00
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2014-09-08 16:51:04 +00:00
bool node_server<t_payload_net_handler>::handle_command_line(
const boost::program_options::variables_map& vm
)
2014-03-03 22:07:58 +00:00
{
2017-03-17 23:39:47 +00:00
auto p2p_bind_arg = m_testnet ? arg_testnet_p2p_bind_port : arg_p2p_bind_port;
2014-09-08 16:51:04 +00:00
2014-03-03 22:07:58 +00:00
m_bind_ip = command_line::get_arg(vm, arg_p2p_bind_ip);
2014-09-08 16:51:04 +00:00
m_port = command_line::get_arg(vm, p2p_bind_arg);
2014-03-03 22:07:58 +00:00
m_external_port = command_line::get_arg(vm, arg_p2p_external_port);
m_allow_local_ip = command_line::get_arg(vm, arg_p2p_allow_local_ip);
2015-01-05 19:30:17 +00:00
m_no_igd = command_line::get_arg(vm, arg_no_igd);
2015-12-07 20:21:45 +00:00
m_offline = command_line::get_arg(vm, arg_offline);
2014-03-03 22:07:58 +00:00
if (command_line::has_arg(vm, arg_p2p_add_peer))
2015-12-14 04:54:39 +00:00
{
2014-03-03 22:07:58 +00:00
std::vector<std::string> perrs = command_line::get_arg(vm, arg_p2p_add_peer);
for(const std::string& pr_str: perrs)
{
nodetool::peerlist_entry pe = AUTO_VAL_INIT(pe);
pe.id = crypto::rand<uint64_t>();
2017-05-27 10:35:54 +00:00
const uint16_t default_port = m_testnet ? ::config::testnet::P2P_DEFAULT_PORT : ::config::P2P_DEFAULT_PORT;
bool r = parse_peer_from_string(pe.adr, pr_str, default_port);
2014-03-03 22:07:58 +00:00
CHECK_AND_ASSERT_MES(r, false, "Failed to parse address from string: " << pr_str);
m_command_line_peers.push_back(pe);
}
}
2015-12-14 04:54:39 +00:00
2015-04-01 17:00:45 +00:00
if(command_line::has_arg(vm, arg_save_graph))
{
2015-12-14 04:54:39 +00:00
set_save_graph(true);
}
2014-03-03 22:07:58 +00:00
2014-05-25 17:06:40 +00:00
if (command_line::has_arg(vm,arg_p2p_add_exclusive_node))
{
if (!parse_peers_and_add_to_container(vm, arg_p2p_add_exclusive_node, m_exclusive_peers))
return false;
}
2015-12-14 04:54:39 +00:00
2014-06-27 17:21:48 +00:00
if (command_line::has_arg(vm, arg_p2p_add_priority_node))
2014-05-25 17:06:40 +00:00
{
if (!parse_peers_and_add_to_container(vm, arg_p2p_add_priority_node, m_priority_peers))
return false;
2014-03-03 22:07:58 +00:00
}
2015-12-14 04:54:39 +00:00
2014-03-03 22:07:58 +00:00
if (command_line::has_arg(vm, arg_p2p_seed_node))
{
2014-05-25 17:06:40 +00:00
if (!parse_peers_and_add_to_container(vm, arg_p2p_seed_node, m_seed_nodes))
return false;
2014-03-03 22:07:58 +00:00
}
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
if(command_line::has_arg(vm, arg_p2p_hide_my_port))
2014-05-25 17:06:40 +00:00
m_hide_my_port = true;
2015-12-14 04:54:39 +00:00
2015-01-05 19:30:17 +00:00
if ( !set_max_out_peers(vm, command_line::get_arg(vm, arg_out_peers) ) )
2015-12-14 04:54:39 +00:00
return false;
2015-01-05 19:30:17 +00:00
2015-12-14 04:54:39 +00:00
if ( !set_tos_flag(vm, command_line::get_arg(vm, arg_tos_flag) ) )
return false;
2015-01-05 19:30:17 +00:00
2015-12-14 04:54:39 +00:00
if ( !set_rate_up_limit(vm, command_line::get_arg(vm, arg_limit_rate_up) ) )
return false;
2015-01-05 19:30:17 +00:00
2015-12-14 04:54:39 +00:00
if ( !set_rate_down_limit(vm, command_line::get_arg(vm, arg_limit_rate_down) ) )
return false;
if ( !set_rate_limit(vm, command_line::get_arg(vm, arg_limit_rate) ) )
return false;
2014-05-25 17:06:40 +00:00
return true;
2014-03-03 22:07:58 +00:00
}
//-----------------------------------------------------------------------------------
2014-09-24 12:45:34 +00:00
inline void append_net_address(
2017-05-27 10:35:54 +00:00
std::vector<epee::net_utils::network_address> & seed_nodes
2014-09-24 12:45:34 +00:00
, std::string const & addr
)
2014-03-20 11:46:11 +00:00
{
2014-09-24 12:45:34 +00:00
using namespace boost::asio;
size_t pos = addr.find_last_of(':');
CHECK_AND_ASSERT_MES_NO_RET(std::string::npos != pos && addr.length() - 1 != pos && 0 != pos, "Failed to parse seed address from string: '" << addr << '\'');
std::string host = addr.substr(0, pos);
std::string port = addr.substr(pos + 1);
io_service io_srv;
ip::tcp::resolver resolver(io_srv);
2016-11-23 23:08:53 +00:00
ip::tcp::resolver::query query(host, port, boost::asio::ip::tcp::resolver::query::canonical_name);
2014-09-24 12:45:34 +00:00
boost::system::error_code ec;
ip::tcp::resolver::iterator i = resolver.resolve(query, ec);
CHECK_AND_ASSERT_MES_NO_RET(!ec, "Failed to resolve host name '" << host << "': " << ec.message() << ':' << ec.value());
ip::tcp::resolver::iterator iend;
for (; i != iend; ++i)
2014-09-09 16:15:42 +00:00
{
2014-09-24 12:45:34 +00:00
ip::tcp::endpoint endpoint = *i;
if (endpoint.address().is_v4())
2014-03-20 11:46:11 +00:00
{
2017-05-27 10:35:54 +00:00
epee::net_utils::network_address na(new epee::net_utils::ipv4_network_address(boost::asio::detail::socket_ops::host_to_network_long(endpoint.address().to_v4().to_ulong()), endpoint.port()));
2014-09-24 12:45:34 +00:00
seed_nodes.push_back(na);
2017-05-27 10:35:54 +00:00
MINFO("Added seed node: " << na.str());
2014-09-09 16:15:42 +00:00
}
else
{
2017-08-01 09:39:36 +00:00
MWARNING("IPv6 unsupported, skip '" << host << "' -> " << endpoint.address().to_v6().to_string(ec));
2017-05-27 10:35:54 +00:00
throw std::runtime_error("IPv6 unsupported");
2014-03-20 11:46:11 +00:00
}
}
}
//-----------------------------------------------------------------------------------
2014-03-03 22:07:58 +00:00
template<class t_payload_net_handler>
2017-03-17 23:39:47 +00:00
std::set<std::string> node_server<t_payload_net_handler>::get_seed_nodes(bool testnet) const
2014-03-03 22:07:58 +00:00
{
2015-05-26 05:11:44 +00:00
std::set<std::string> full_addrs;
2014-09-09 13:10:30 +00:00
if (testnet)
{
}
else
2017-03-17 23:39:47 +00:00
{
2018-01-24 15:48:33 +00:00
full_addrs.insert("173.212.249.24:14086");
full_addrs.insert("173.212.243.115:14086");
2017-03-17 23:39:47 +00:00
}
return full_addrs;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::init(const boost::program_options::variables_map& vm)
{
std::set<std::string> full_addrs;
m_testnet = command_line::get_arg(vm, command_line::arg_testnet_on);
if (m_testnet)
{
memcpy(&m_network_id, &::config::testnet::NETWORK_ID, 16);
full_addrs = get_seed_nodes(true);
}
else
2014-09-09 13:10:30 +00:00
{
2015-01-29 22:10:53 +00:00
memcpy(&m_network_id, &::config::NETWORK_ID, 16);
2014-09-17 19:35:52 +00:00
// for each hostname in the seed nodes list, attempt to DNS resolve and
// add the result addresses as seed nodes
// TODO: at some point add IPv6 support, but that won't be relevant
// for some time yet.
2015-12-14 04:54:39 +00:00
2014-12-15 22:23:42 +00:00
std::vector<std::vector<std::string>> dns_results;
dns_results.resize(m_seed_nodes_list.size());
2014-12-15 22:43:12 +00:00
2017-07-28 21:23:05 +00:00
std::list<boost::thread> dns_threads;
2014-12-15 22:23:42 +00:00
uint64_t result_index = 0;
2014-09-17 19:35:52 +00:00
for (const std::string& addr_str : m_seed_nodes_list)
{
2017-07-28 21:23:05 +00:00
boost::thread th = boost::thread([=, &dns_results, &addr_str]
2014-12-15 22:23:42 +00:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("dns_threads[" << result_index << "] created for: " << addr_str);
2014-12-15 22:23:42 +00:00
// TODO: care about dnssec avail/valid
bool avail, valid;
2015-01-14 21:14:01 +00:00
std::vector<std::string> addr_list;
try
{
2015-08-15 04:04:29 +00:00
addr_list = tools::DNSResolver::instance().get_ipv4(addr_str, avail, valid);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("dns_threads[" << result_index << "] DNS resolve done");
2015-01-14 21:14:01 +00:00
boost::this_thread::interruption_point();
}
catch(const boost::thread_interrupted&)
{
// thread interruption request
// even if we now have results, finish thread without setting
// result variables, which are now out of scope in main thread
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("dns_threads[" << result_index << "] interrupted");
2015-01-14 21:14:01 +00:00
return;
}
2014-12-15 22:23:42 +00:00
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("dns_threads[" << result_index << "] addr_str: " << addr_str << " number of results: " << addr_list.size());
2015-01-14 21:14:01 +00:00
dns_results[result_index] = addr_list;
2014-12-15 22:23:42 +00:00
});
2017-07-28 21:23:05 +00:00
dns_threads.push_back(std::move(th));
2015-01-14 21:14:01 +00:00
++result_index;
2014-12-15 22:23:42 +00:00
}
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("dns_threads created, now waiting for completion or timeout of " << CRYPTONOTE_DNS_TIMEOUT_MS << "ms");
2015-01-14 21:14:01 +00:00
boost::chrono::system_clock::time_point deadline = boost::chrono::system_clock::now() + boost::chrono::milliseconds(CRYPTONOTE_DNS_TIMEOUT_MS);
uint64_t i = 0;
2017-07-28 21:23:05 +00:00
for (boost::thread& th : dns_threads)
2014-12-15 22:23:42 +00:00
{
2017-07-28 21:23:05 +00:00
if (! th.try_join_until(deadline))
2014-12-15 22:23:42 +00:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("dns_threads[" << i << "] timed out, sending interrupt");
2017-07-28 21:23:05 +00:00
th.interrupt();
2014-12-15 22:23:42 +00:00
}
2015-01-14 21:14:01 +00:00
++i;
2014-12-15 22:23:42 +00:00
}
2015-01-14 21:14:01 +00:00
i = 0;
2014-12-15 22:23:42 +00:00
for (const auto& result : dns_results)
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("DNS lookup for " << m_seed_nodes_list[i] << ": " << result.size() << " results");
2015-01-14 21:14:01 +00:00
// if no results for node, thread's lookup likely timed out
if (result.size())
2014-09-17 19:35:52 +00:00
{
2015-01-14 21:14:01 +00:00
for (const auto& addr_string : result)
2015-05-26 05:11:44 +00:00
full_addrs.insert(addr_string + ":18080");
2014-09-17 19:35:52 +00:00
}
2015-01-14 21:14:01 +00:00
++i;
2014-09-17 19:35:52 +00:00
}
2017-03-17 23:39:47 +00:00
// append the fallback nodes if we have too few seed nodes to start with
if (full_addrs.size() < MIN_WANTED_SEED_NODES)
2014-09-17 19:35:52 +00:00
{
2017-03-17 23:39:47 +00:00
if (full_addrs.empty())
MINFO("DNS seed node lookup either timed out or failed, falling back to defaults");
else
MINFO("Not enough DNS seed nodes found, using fallback defaults too");
for (const auto &peer: get_seed_nodes(false))
full_addrs.insert(peer);
2014-09-17 19:35:52 +00:00
}
2014-07-16 17:30:15 +00:00
}
2014-03-03 22:07:58 +00:00
2015-05-26 05:11:44 +00:00
for (const auto& full_addr : full_addrs)
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("Seed node: " << full_addr);
2015-05-26 05:11:44 +00:00
append_net_address(m_seed_nodes, full_addr);
}
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("Number of seed nodes: " << m_seed_nodes.size());
2015-05-26 05:11:44 +00:00
2017-03-17 23:39:47 +00:00
bool res = handle_command_line(vm);
2014-03-03 22:07:58 +00:00
CHECK_AND_ASSERT_MES(res, false, "Failed to handle command line");
2014-09-09 18:50:21 +00:00
2017-03-17 23:39:47 +00:00
auto config_arg = m_testnet ? command_line::arg_testnet_data_dir : command_line::arg_data_dir;
2014-09-09 18:50:21 +00:00
m_config_folder = command_line::get_arg(vm, config_arg);
2014-03-03 22:07:58 +00:00
2017-03-17 23:39:47 +00:00
if ((!m_testnet && m_port != std::to_string(::config::P2P_DEFAULT_PORT))
|| (m_testnet && m_port != std::to_string(::config::testnet::P2P_DEFAULT_PORT))) {
2017-01-28 00:36:39 +00:00
m_config_folder = m_config_folder + "/" + m_port;
}
2014-03-03 22:07:58 +00:00
res = init_config();
CHECK_AND_ASSERT_MES(res, false, "Failed to init config.");
res = m_peerlist.init(m_allow_local_ip);
CHECK_AND_ASSERT_MES(res, false, "Failed to init peerlist.");
for(auto& p: m_command_line_peers)
m_peerlist.append_with_peer_white(p);
2015-12-14 04:54:39 +00:00
2014-03-03 22:07:58 +00:00
//only in case if we really sure that we have external visible ip
m_have_address = true;
m_ip_address = 0;
m_last_stat_request_time = 0;
//configure self
m_net_server.set_threads_prefix("P2P");
m_net_server.get_config_object().m_pcommands_handler = this;
m_net_server.get_config_object().m_invoke_timeout = P2P_DEFAULT_INVOKE_TIMEOUT;
2015-11-23 17:34:55 +00:00
m_net_server.set_connection_filter(this);
2014-03-03 22:07:58 +00:00
2015-12-07 20:21:45 +00:00
// from here onwards, it's online stuff
if (m_offline)
return res;
2014-03-03 22:07:58 +00:00
//try to bind
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Binding on " << m_bind_ip << ":" << m_port);
2014-03-03 22:07:58 +00:00
res = m_net_server.init_server(m_port, m_bind_ip);
CHECK_AND_ASSERT_MES(res, false, "Failed to bind server");
m_listenning_port = m_net_server.get_binded_port();
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MLOG_GREEN(el::Level::Info, "Net service bound to " << m_bind_ip << ":" << m_listenning_port);
2014-03-03 22:07:58 +00:00
if(m_external_port)
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("External port defined as " << m_external_port);
2014-04-09 12:14:35 +00:00
// Add UPnP port mapping
2015-01-05 19:30:17 +00:00
if(m_no_igd == false) {
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("Attempting to add IGD port mapping.");
2015-12-14 04:54:39 +00:00
int result;
2015-10-05 23:49:58 +00:00
#if MINIUPNPC_API_VERSION > 13
2015-12-14 04:54:39 +00:00
// default according to miniupnpc.h
unsigned char ttl = 2;
UPNPDev* deviceList = upnpDiscover(1000, NULL, NULL, 0, 0, ttl, &result);
2015-10-05 23:49:58 +00:00
#else
2015-12-14 04:54:39 +00:00
UPNPDev* deviceList = upnpDiscover(1000, NULL, NULL, 0, 0, &result);
2015-10-05 23:49:58 +00:00
#endif
2015-12-14 04:54:39 +00:00
UPNPUrls urls;
IGDdatas igdData;
char lanAddress[64];
result = UPNP_GetValidIGD(deviceList, &urls, &igdData, lanAddress, sizeof lanAddress);
freeUPNPDevlist(deviceList);
if (result != 0) {
if (result == 1) {
std::ostringstream portString;
portString << m_listenning_port;
// Delete the port mapping before we create it, just in case we have dangling port mapping from the daemon not being shut down correctly
UPNP_DeletePortMapping(urls.controlURL, igdData.first.servicetype, portString.str().c_str(), "TCP", 0);
int portMappingResult;
portMappingResult = UPNP_AddPortMapping(urls.controlURL, igdData.first.servicetype, portString.str().c_str(), portString.str().c_str(), lanAddress, CRYPTONOTE_NAME, "TCP", 0, "0");
if (portMappingResult != 0) {
LOG_ERROR("UPNP_AddPortMapping failed, error: " << strupnperror(portMappingResult));
} else {
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MLOG_GREEN(el::Level::Info, "Added IGD port mapping.");
2015-12-14 04:54:39 +00:00
}
} else if (result == 2) {
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("IGD was found but reported as not connected.");
2015-12-14 04:54:39 +00:00
} else if (result == 3) {
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("UPnP device was found but not recognized as IGD.");
2015-12-14 04:54:39 +00:00
} else {
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("UPNP_GetValidIGD returned an unknown result code.");
2015-12-14 04:54:39 +00:00
}
FreeUPNPUrls(&urls);
} else {
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("No IGD was found.");
2015-12-14 04:54:39 +00:00
}
}
2014-03-03 22:07:58 +00:00
return res;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
typename node_server<t_payload_net_handler>::payload_net_handler& node_server<t_payload_net_handler>::get_payload_object()
{
return m_payload_handler;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::run()
{
2015-12-14 04:54:39 +00:00
// creating thread to log number of connections
2016-02-18 21:30:10 +00:00
mPeersLoggerThread.reset(new boost::thread([&]()
2015-12-14 04:54:39 +00:00
{
_note("Thread monitor number of peers - start");
2015-12-22 12:29:53 +00:00
while (!is_closing && !m_net_server.is_stop_signal_sent())
2015-12-14 04:54:39 +00:00
{ // main loop of thread
//number_of_peers = m_net_server.get_config_object().get_connections_count();
unsigned int number_of_peers = 0;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
if (!cntxt.m_is_income) ++number_of_peers;
return true;
}); // lambda
m_current_number_of_out_peers = number_of_peers;
2016-03-11 12:25:28 +00:00
boost::this_thread::sleep_for(boost::chrono::seconds(1));
2015-12-14 04:54:39 +00:00
} // main loop of thread
_note("Thread monitor number of peers - done");
})); // lambda
2014-03-03 22:07:58 +00:00
//here you can set worker threads count
int thrds_count = 10;
m_net_server.add_idle_handler(boost::bind(&node_server<t_payload_net_handler>::idle_worker, this), 1000);
m_net_server.add_idle_handler(boost::bind(&t_payload_net_handler::on_idle, &m_payload_handler), 1000);
2014-04-30 20:50:06 +00:00
boost::thread::attributes attrs;
attrs.set_stack_size(THREAD_STACK_SIZE);
2014-03-03 22:07:58 +00:00
//go to loop
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Run net_service loop( " << thrds_count << " threads)...");
2014-04-30 20:50:06 +00:00
if(!m_net_server.run_server(thrds_count, true, attrs))
2014-03-03 22:07:58 +00:00
{
LOG_ERROR("Failed to run net tcp server!");
}
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("net_service loop stopped.");
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
uint64_t node_server<t_payload_net_handler>::get_connections_count()
{
return m_net_server.get_config_object().get_connections_count();
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::deinit()
{
2015-12-14 04:54:39 +00:00
kill();
2014-03-03 22:07:58 +00:00
m_peerlist.deinit();
m_net_server.deinit_server();
return store_config();
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::store_config()
{
TRY_ENTRY();
if (!tools::create_directories_if_necessary(m_config_folder))
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("Failed to create data directory: " << m_config_folder);
2014-03-03 22:07:58 +00:00
return false;
}
std::string state_file_path = m_config_folder + "/" + P2P_NET_DATA_FILENAME;
std::ofstream p2p_data;
p2p_data.open( state_file_path , std::ios_base::binary | std::ios_base::out| std::ios::trunc);
if(p2p_data.fail())
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MWARNING("Failed to save config to file " << state_file_path);
2014-03-03 22:07:58 +00:00
return false;
};
2016-12-20 04:04:19 +00:00
boost::archive::portable_binary_oarchive a(p2p_data);
2014-03-03 22:07:58 +00:00
a << *this;
return true;
CATCH_ENTRY_L0("blockchain_storage::save", false);
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::send_stop_signal()
{
2017-07-29 09:03:37 +00:00
std::list<boost::uuids::uuid> connection_ids;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt) {
connection_ids.push_back(cntxt.m_connection_id);
return true;
});
for (const auto &connection_id: connection_ids)
m_net_server.get_config_object().close(connection_id);
2016-12-04 12:27:45 +00:00
m_payload_handler.stop();
2014-03-03 22:07:58 +00:00
m_net_server.send_stop_signal();
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("[node] Stop signal sent");
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
2015-12-14 04:54:39 +00:00
2014-03-03 22:07:58 +00:00
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::do_handshake_with_peer(peerid_type& pi, p2p_connection_context& context_, bool just_take_peerlist)
{
typename COMMAND_HANDSHAKE::request arg;
typename COMMAND_HANDSHAKE::response rsp;
get_local_node_data(arg.node_data);
m_payload_handler.get_payload_sync_data(arg.payload_data);
2015-12-14 04:54:39 +00:00
2014-05-25 17:06:40 +00:00
epee::simple_event ev;
2014-03-03 22:07:58 +00:00
std::atomic<bool> hsh_result(false);
2015-12-14 04:54:39 +00:00
bool r = epee::net_utils::async_invoke_remote_command2<typename COMMAND_HANDSHAKE::response>(context_.m_connection_id, COMMAND_HANDSHAKE::ID, arg, m_net_server.get_config_object(),
2014-03-03 22:07:58 +00:00
[this, &pi, &ev, &hsh_result, &just_take_peerlist](int code, const typename COMMAND_HANDSHAKE::response& rsp, p2p_connection_context& context)
{
2014-05-25 17:06:40 +00:00
epee::misc_utils::auto_scope_leave_caller scope_exit_handler = epee::misc_utils::create_scope_leave_handler([&](){ev.raise();});
2014-03-03 22:07:58 +00:00
if(code < 0)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE invoke failed. (" << code << ", " << epee::levin::get_err_descr(code) << ")");
2014-03-03 22:07:58 +00:00
return;
}
2014-07-16 17:30:15 +00:00
if(rsp.node_data.network_id != m_network_id)
2014-03-03 22:07:58 +00:00
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE Failed, wrong network! (" << epee::string_tools::get_str_from_guid_a(rsp.node_data.network_id) << "), closing connection.");
2014-03-03 22:07:58 +00:00
return;
}
2017-05-27 10:35:54 +00:00
if(!handle_remote_peerlist(rsp.local_peerlist_new, rsp.node_data.local_time, context))
2014-03-03 22:07:58 +00:00
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE: failed to handle_remote_peerlist(...), closing connection.");
2017-05-27 10:35:54 +00:00
add_host_fail(context.m_remote_address);
2014-03-03 22:07:58 +00:00
return;
}
hsh_result = true;
if(!just_take_peerlist)
{
if(!m_payload_handler.process_payload_sync_data(rsp.payload_data, context, true))
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE invoked, but process_payload_sync_data returned false, dropping connection.");
2014-03-03 22:07:58 +00:00
hsh_result = false;
return;
}
pi = context.peer_id = rsp.node_data.peer_id;
2017-05-27 10:35:54 +00:00
m_peerlist.set_peer_just_seen(rsp.node_data.peer_id, context.m_remote_address);
2014-03-03 22:07:58 +00:00
if(rsp.node_data.peer_id == m_config.m_peer_id)
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, "Connection to self detected, dropping connection");
2014-03-03 22:07:58 +00:00
hsh_result = false;
return;
}
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, " COMMAND_HANDSHAKE INVOKED OK");
2014-03-03 22:07:58 +00:00
}else
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, " COMMAND_HANDSHAKE(AND CLOSE) INVOKED OK");
2014-03-03 22:07:58 +00:00
}
}, P2P_DEFAULT_HANDSHAKE_INVOKE_TIMEOUT);
if(r)
{
ev.wait();
}
if(!hsh_result)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context_, "COMMAND_HANDSHAKE Failed");
2014-03-03 22:07:58 +00:00
m_net_server.get_config_object().close(context_.m_connection_id);
}
2016-10-26 19:00:08 +00:00
else
{
try_get_support_flags(context_, [](p2p_connection_context& flags_context, const uint32_t& support_flags)
{
flags_context.support_flags = support_flags;
});
}
2014-03-03 22:07:58 +00:00
return hsh_result;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2014-05-25 17:06:40 +00:00
bool node_server<t_payload_net_handler>::do_peer_timed_sync(const epee::net_utils::connection_context_base& context_, peerid_type peer_id)
2014-03-03 22:07:58 +00:00
{
typename COMMAND_TIMED_SYNC::request arg = AUTO_VAL_INIT(arg);
m_payload_handler.get_payload_sync_data(arg.payload_data);
2015-12-14 04:54:39 +00:00
bool r = epee::net_utils::async_invoke_remote_command2<typename COMMAND_TIMED_SYNC::response>(context_.m_connection_id, COMMAND_TIMED_SYNC::ID, arg, m_net_server.get_config_object(),
2014-03-03 22:07:58 +00:00
[this](int code, const typename COMMAND_TIMED_SYNC::response& rsp, p2p_connection_context& context)
{
2017-06-04 21:37:53 +00:00
context.m_in_timedsync = false;
2014-03-03 22:07:58 +00:00
if(code < 0)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_TIMED_SYNC invoke failed. (" << code << ", " << epee::levin::get_err_descr(code) << ")");
2014-03-03 22:07:58 +00:00
return;
}
2017-05-27 10:35:54 +00:00
if(!handle_remote_peerlist(rsp.local_peerlist_new, rsp.local_time, context))
2014-03-03 22:07:58 +00:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_WARNING_CC(context, "COMMAND_TIMED_SYNC: failed to handle_remote_peerlist(...), closing connection.");
2014-03-03 22:07:58 +00:00
m_net_server.get_config_object().close(context.m_connection_id );
2017-05-27 10:35:54 +00:00
add_host_fail(context.m_remote_address);
2014-03-03 22:07:58 +00:00
}
if(!context.m_is_income)
2017-05-27 10:35:54 +00:00
m_peerlist.set_peer_just_seen(context.peer_id, context.m_remote_address);
2014-03-03 22:07:58 +00:00
m_payload_handler.process_payload_sync_data(rsp.payload_data, context, false);
});
if(!r)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context_, "COMMAND_TIMED_SYNC Failed");
2014-03-03 22:07:58 +00:00
return false;
}
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
size_t node_server<t_payload_net_handler>::get_random_index_with_fixed_probability(size_t max_index)
{
//divide by zero workaround
if(!max_index)
return 0;
size_t x = crypto::rand<size_t>()%(max_index+1);
size_t res = (x*x*x)/(max_index*max_index); //parabola \/
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("Random connection index=" << res << "(x="<< x << ", max_index=" << max_index << ")");
2014-03-03 22:07:58 +00:00
return res;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::is_peer_used(const peerlist_entry& peer)
{
if(m_config.m_peer_id == peer.id)
return true;//dont make connections to ourself
bool used = false;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
2017-05-27 10:35:54 +00:00
if(cntxt.peer_id == peer.id || (!cntxt.m_is_income && peer.adr == cntxt.m_remote_address))
2014-03-03 22:07:58 +00:00
{
used = true;
return false;//stop enumerating
}
return true;
});
return used;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-02-09 00:11:58 +00:00
bool node_server<t_payload_net_handler>::is_peer_used(const anchor_peerlist_entry& peer)
{
if(m_config.m_peer_id == peer.id) {
return true;//dont make connections to ourself
}
bool used = false;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
2017-05-27 10:35:54 +00:00
if(cntxt.peer_id == peer.id || (!cntxt.m_is_income && peer.adr == cntxt.m_remote_address))
2017-02-09 00:11:58 +00:00
{
used = true;
return false;//stop enumerating
}
return true;
});
return used;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::is_addr_connected(const epee::net_utils::network_address& peer)
2014-03-03 22:07:58 +00:00
{
bool connected = false;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
2017-05-27 10:35:54 +00:00
if(!cntxt.m_is_income && peer == cntxt.m_remote_address)
2014-03-03 22:07:58 +00:00
{
connected = true;
return false;//stop enumerating
}
return true;
});
return connected;
}
2014-05-25 17:06:40 +00:00
#define LOG_PRINT_CC_PRIORITY_NODE(priority, con, msg) \
do { \
if (priority) {\
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_INFO_CC(con, "[priority]" << msg); \
2014-05-25 17:06:40 +00:00
} else {\
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_INFO_CC(con, msg); \
2014-05-25 17:06:40 +00:00
} \
} while(0)
2014-03-03 22:07:58 +00:00
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::try_to_connect_and_handshake_with_new_peer(const epee::net_utils::network_address& na, bool just_take_peerlist, uint64_t last_seen_stamp, PeerType peer_type, uint64_t first_seen_stamp)
2014-03-03 22:07:58 +00:00
{
2015-12-14 04:54:39 +00:00
if (m_current_number_of_out_peers == m_config.m_net_config.connections_count) // out peers limit
{
return false;
}
else if (m_current_number_of_out_peers > m_config.m_net_config.connections_count)
{
m_net_server.get_config_object().del_out_connections(1);
m_current_number_of_out_peers --; // atomic variable, update time = 1s
return false;
}
2017-05-27 10:35:54 +00:00
MDEBUG("Connecting to " << na.str() << "(peer_type=" << peer_type << ", last_seen: "
2014-05-25 17:06:40 +00:00
<< (last_seen_stamp ? epee::misc_utils::get_time_interval_string(time(NULL) - last_seen_stamp):"never")
<< ")...");
2014-03-03 22:07:58 +00:00
2017-06-28 08:00:29 +00:00
CHECK_AND_ASSERT_MES(na.get_type_id() == epee::net_utils::ipv4_network_address::ID, false,
"Only IPv4 addresses are supported here");
2017-05-27 10:35:54 +00:00
const epee::net_utils::ipv4_network_address &ipv4 = na.as<const epee::net_utils::ipv4_network_address>();
2014-03-03 22:07:58 +00:00
typename net_server::t_connection_context con = AUTO_VAL_INIT(con);
2017-05-27 10:35:54 +00:00
bool res = m_net_server.connect(epee::string_tools::get_ip_string_from_int32(ipv4.ip()),
epee::string_tools::num_to_string_fast(ipv4.port()),
2014-03-03 22:07:58 +00:00
m_config.m_net_config.connection_timeout,
con);
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
if(!res)
{
2014-05-25 17:06:40 +00:00
bool is_priority = is_priority_node(na);
2017-05-27 10:35:54 +00:00
LOG_PRINT_CC_PRIORITY_NODE(is_priority, con, "Connect failed to " << na.str()
2014-03-03 22:07:58 +00:00
/*<< ", try " << try_count*/);
//m_peerlist.set_peer_unreachable(pe);
return false;
}
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
peerid_type pi = AUTO_VAL_INIT(pi);
res = do_handshake_with_peer(pi, con, just_take_peerlist);
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
if(!res)
{
2014-05-25 17:06:40 +00:00
bool is_priority = is_priority_node(na);
LOG_PRINT_CC_PRIORITY_NODE(is_priority, con, "Failed to HANDSHAKE with peer "
2017-05-27 10:35:54 +00:00
<< na.str()
2014-03-03 22:07:58 +00:00
/*<< ", try " << try_count*/);
return false;
}
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
if(just_take_peerlist)
{
m_net_server.get_config_object().close(con.m_connection_id);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(con, "CONNECTION HANDSHAKED OK AND CLOSED.");
2014-03-03 22:07:58 +00:00
return true;
}
peerlist_entry pe_local = AUTO_VAL_INIT(pe_local);
pe_local.adr = na;
pe_local.id = pi;
2014-08-20 15:57:29 +00:00
time_t last_seen;
time(&last_seen);
pe_local.last_seen = static_cast<int64_t>(last_seen);
2014-03-03 22:07:58 +00:00
m_peerlist.append_with_peer_white(pe_local);
//update last seen and push it to peerlist manager
2017-02-09 00:11:58 +00:00
anchor_peerlist_entry ape = AUTO_VAL_INIT(ape);
ape.adr = na;
ape.id = pi;
ape.first_seen = first_seen_stamp ? first_seen_stamp : time(nullptr);
m_peerlist.append_with_peer_anchor(ape);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(con, "CONNECTION HANDSHAKED OK.");
2014-03-03 22:07:58 +00:00
return true;
}
2014-05-25 17:06:40 +00:00
2017-01-20 23:59:04 +00:00
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::check_connection_and_handshake_with_peer(const epee::net_utils::network_address& na, uint64_t last_seen_stamp)
2017-01-20 23:59:04 +00:00
{
2017-05-27 10:35:54 +00:00
LOG_PRINT_L1("Connecting to " << na.str() << "(last_seen: "
2017-01-20 23:59:04 +00:00
<< (last_seen_stamp ? epee::misc_utils::get_time_interval_string(time(NULL) - last_seen_stamp):"never")
<< ")...");
2017-06-28 08:00:29 +00:00
CHECK_AND_ASSERT_MES(na.get_type_id() == epee::net_utils::ipv4_network_address::ID, false,
"Only IPv4 addresses are supported here");
2017-05-27 10:35:54 +00:00
const epee::net_utils::ipv4_network_address &ipv4 = na.as<epee::net_utils::ipv4_network_address>();
2017-01-20 23:59:04 +00:00
typename net_server::t_connection_context con = AUTO_VAL_INIT(con);
2017-05-27 10:35:54 +00:00
bool res = m_net_server.connect(epee::string_tools::get_ip_string_from_int32(ipv4.ip()),
epee::string_tools::num_to_string_fast(ipv4.port()),
2017-01-20 23:59:04 +00:00
m_config.m_net_config.connection_timeout,
con);
if (!res) {
bool is_priority = is_priority_node(na);
2017-05-27 10:35:54 +00:00
LOG_PRINT_CC_PRIORITY_NODE(is_priority, con, "Connect failed to " << na.str());
2017-01-20 23:59:04 +00:00
return false;
}
peerid_type pi = AUTO_VAL_INIT(pi);
res = do_handshake_with_peer(pi, con, true);
if (!res) {
bool is_priority = is_priority_node(na);
2017-05-27 10:35:54 +00:00
LOG_PRINT_CC_PRIORITY_NODE(is_priority, con, "Failed to HANDSHAKE with peer " << na.str());
2017-01-20 23:59:04 +00:00
return false;
}
m_net_server.get_config_object().close(con.m_connection_id);
2017-01-21 10:22:04 +00:00
LOG_DEBUG_CC(con, "CONNECTION HANDSHAKED OK AND CLOSED.");
2017-01-20 23:59:04 +00:00
return true;
}
2014-05-25 17:06:40 +00:00
#undef LOG_PRINT_CC_PRIORITY_NODE
2015-11-23 17:34:55 +00:00
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::is_addr_recently_failed(const epee::net_utils::network_address& addr)
2015-11-23 17:34:55 +00:00
{
CRITICAL_REGION_LOCAL(m_conn_fails_cache_lock);
auto it = m_conn_fails_cache.find(addr);
if(it == m_conn_fails_cache.end())
return false;
if(time(NULL) - it->second > P2P_FAILED_ADDR_FORGET_SECONDS)
return false;
else
return true;
}
2014-03-03 22:07:58 +00:00
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-02-09 00:11:58 +00:00
bool node_server<t_payload_net_handler>::make_new_connection_from_anchor_peerlist(const std::vector<anchor_peerlist_entry>& anchor_peerlist)
{
for (const auto& pe: anchor_peerlist) {
2017-08-20 20:15:53 +00:00
_note("Considering connecting (out) to peer: " << peerid_type(pe.id) << " " << pe.adr.str());
2017-02-09 00:11:58 +00:00
if(is_peer_used(pe)) {
_note("Peer is used");
continue;
}
2017-05-27 10:35:54 +00:00
if(!is_remote_host_allowed(pe.adr)) {
2017-02-09 00:11:58 +00:00
continue;
}
if(is_addr_recently_failed(pe.adr)) {
continue;
}
2017-08-20 20:15:53 +00:00
MDEBUG("Selected peer: " << peerid_to_string(pe.id) << " " << pe.adr.str()
2017-02-09 00:11:58 +00:00
<< "[peer_type=" << anchor
<< "] first_seen: " << epee::misc_utils::get_time_interval_string(time(NULL) - pe.first_seen));
if(!try_to_connect_and_handshake_with_new_peer(pe.adr, false, 0, anchor, pe.first_seen)) {
_note("Handshake failed");
continue;
}
return true;
}
return false;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2014-03-03 22:07:58 +00:00
bool node_server<t_payload_net_handler>::make_new_connection_from_peerlist(bool use_white_list)
{
size_t local_peers_count = use_white_list ? m_peerlist.get_white_peers_count():m_peerlist.get_gray_peers_count();
if(!local_peers_count)
return false;//no peers
size_t max_random_index = std::min<uint64_t>(local_peers_count -1, 20);
std::set<size_t> tried_peers;
size_t try_count = 0;
size_t rand_count = 0;
while(rand_count < (max_random_index+1)*3 && try_count < 10 && !m_net_server.is_stop_signal_sent())
{
++rand_count;
2017-02-28 16:39:39 +00:00
size_t random_index;
if (use_white_list) {
2017-08-11 13:29:55 +00:00
local_peers_count = m_peerlist.get_white_peers_count();
max_random_index = std::min<uint64_t>(local_peers_count -1, 20);
2017-02-28 16:39:39 +00:00
random_index = get_random_index_with_fixed_probability(max_random_index);
} else {
random_index = crypto::rand<size_t>() % m_peerlist.get_gray_peers_count();
}
2014-03-03 22:07:58 +00:00
CHECK_AND_ASSERT_MES(random_index < local_peers_count, false, "random_starter_index < peers_local.size() failed!!");
if(tried_peers.count(random_index))
continue;
tried_peers.insert(random_index);
peerlist_entry pe = AUTO_VAL_INIT(pe);
bool r = use_white_list ? m_peerlist.get_white_peer_by_index(pe, random_index):m_peerlist.get_gray_peer_by_index(pe, random_index);
CHECK_AND_ASSERT_MES(r, false, "Failed to get random peer from peerlist(white:" << use_white_list << ")");
++try_count;
2017-08-20 20:15:53 +00:00
_note("Considering connecting (out) to peer: " << peerid_to_string(pe.id) << " " << pe.adr.str());
2015-02-12 19:59:39 +00:00
if(is_peer_used(pe)) {
2015-12-14 04:54:39 +00:00
_note("Peer is used");
2014-03-03 22:07:58 +00:00
continue;
2015-12-14 04:54:39 +00:00
}
2014-03-03 22:07:58 +00:00
2017-05-27 10:35:54 +00:00
if(!is_remote_host_allowed(pe.adr))
2015-11-23 17:34:55 +00:00
continue;
if(is_addr_recently_failed(pe.adr))
continue;
2017-08-20 20:15:53 +00:00
MDEBUG("Selected peer: " << peerid_to_string(pe.id) << " " << pe.adr.str()
2017-02-09 00:11:58 +00:00
<< "[peer_list=" << (use_white_list ? white : gray)
2014-05-25 17:06:40 +00:00
<< "] last_seen: " << (pe.last_seen ? epee::misc_utils::get_time_interval_string(time(NULL) - pe.last_seen) : "never"));
2015-12-14 04:54:39 +00:00
2017-02-09 00:11:58 +00:00
if(!try_to_connect_and_handshake_with_new_peer(pe.adr, false, pe.last_seen, use_white_list ? white : gray)) {
2015-12-14 04:54:39 +00:00
_note("Handshake failed");
2014-03-03 22:07:58 +00:00
continue;
2015-12-14 04:54:39 +00:00
}
2014-03-03 22:07:58 +00:00
return true;
}
return false;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-08-09 21:44:39 +00:00
bool node_server<t_payload_net_handler>::connect_to_seed()
2014-03-03 22:07:58 +00:00
{
2017-08-09 21:44:39 +00:00
if (m_seed_nodes.empty())
return true;
2014-05-25 17:06:40 +00:00
2014-03-03 22:07:58 +00:00
size_t try_count = 0;
size_t current_index = crypto::rand<size_t>()%m_seed_nodes.size();
2017-03-17 23:39:47 +00:00
bool fallback_nodes_added = false;
2014-03-03 22:07:58 +00:00
while(true)
2015-12-14 04:54:39 +00:00
{
2014-03-03 22:07:58 +00:00
if(m_net_server.is_stop_signal_sent())
return false;
if(try_to_connect_and_handshake_with_new_peer(m_seed_nodes[current_index], true))
break;
if(++try_count > m_seed_nodes.size())
{
2017-03-17 23:39:47 +00:00
if (!fallback_nodes_added)
{
MWARNING("Failed to connect to any of seed peers, trying fallback seeds");
for (const auto &peer: get_seed_nodes(m_testnet))
{
MDEBUG("Fallback seed node: " << peer);
append_net_address(m_seed_nodes, peer);
}
fallback_nodes_added = true;
// continue for another few cycles
}
else
{
MWARNING("Failed to connect to any of seed peers, continuing without seeds");
break;
}
2014-03-03 22:07:58 +00:00
}
2014-03-20 11:46:11 +00:00
if(++current_index >= m_seed_nodes.size())
2014-03-03 22:07:58 +00:00
current_index = 0;
}
2017-08-09 21:44:39 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::connections_maker()
{
if (!connect_to_peerlist(m_exclusive_peers)) return false;
if (!m_exclusive_peers.empty()) return true;
size_t start_conn_count = get_outgoing_connections_count();
if(!m_peerlist.get_white_peers_count() && m_seed_nodes.size())
{
if (!connect_to_seed())
return false;
2014-03-03 22:07:58 +00:00
}
2014-05-25 17:06:40 +00:00
if (!connect_to_peerlist(m_priority_peers)) return false;
2014-03-03 22:07:58 +00:00
size_t expected_white_connections = (m_config.m_net_config.connections_count*P2P_DEFAULT_WHITELIST_CONNECTIONS_PERCENT)/100;
size_t conn_count = get_outgoing_connections_count();
if(conn_count < m_config.m_net_config.connections_count)
{
if(conn_count < expected_white_connections)
{
2017-02-09 00:11:58 +00:00
//start from anchor list
if(!make_expected_connections_count(anchor, P2P_DEFAULT_ANCHOR_CONNECTIONS_COUNT))
return false;
//then do white list
if(!make_expected_connections_count(white, expected_white_connections))
2014-03-03 22:07:58 +00:00
return false;
2017-02-09 00:11:58 +00:00
//then do grey list
if(!make_expected_connections_count(gray, m_config.m_net_config.connections_count))
2014-03-03 22:07:58 +00:00
return false;
}else
{
//start from grey list
2017-02-09 00:11:58 +00:00
if(!make_expected_connections_count(gray, m_config.m_net_config.connections_count))
2014-03-03 22:07:58 +00:00
return false;
//and then do white list
2017-02-09 00:11:58 +00:00
if(!make_expected_connections_count(white, m_config.m_net_config.connections_count))
2014-03-03 22:07:58 +00:00
return false;
}
}
2017-08-09 21:44:39 +00:00
if (start_conn_count == get_outgoing_connections_count() && start_conn_count < m_config.m_net_config.connections_count)
{
MINFO("Failed to connect to any, trying seeds");
if (!connect_to_seed())
return false;
}
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2017-02-09 00:11:58 +00:00
bool node_server<t_payload_net_handler>::make_expected_connections_count(PeerType peer_type, size_t expected_connections)
2014-03-03 22:07:58 +00:00
{
2015-12-07 20:21:45 +00:00
if (m_offline)
return true;
2017-02-09 00:11:58 +00:00
std::vector<anchor_peerlist_entry> apl;
if (peer_type == anchor) {
m_peerlist.get_and_empty_anchor_peerlist(apl);
}
2014-03-03 22:07:58 +00:00
size_t conn_count = get_outgoing_connections_count();
//add new connections from white peers
while(conn_count < expected_connections)
{
if(m_net_server.is_stop_signal_sent())
return false;
2017-02-09 00:11:58 +00:00
if (peer_type == anchor && !make_new_connection_from_anchor_peerlist(apl)) {
break;
}
if (peer_type == white && !make_new_connection_from_peerlist(true)) {
2014-03-03 22:07:58 +00:00
break;
2017-02-09 00:11:58 +00:00
}
if (peer_type == gray && !make_new_connection_from_peerlist(false)) {
break;
}
2014-03-03 22:07:58 +00:00
conn_count = get_outgoing_connections_count();
}
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
size_t node_server<t_payload_net_handler>::get_outgoing_connections_count()
{
size_t count = 0;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
if(!cntxt.m_is_income)
++count;
return true;
});
return count;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::idle_worker()
{
m_peer_handshake_idle_maker_interval.do_call(boost::bind(&node_server<t_payload_net_handler>::peer_sync_idle_maker, this));
m_connections_maker_interval.do_call(boost::bind(&node_server<t_payload_net_handler>::connections_maker, this));
2017-01-20 23:59:04 +00:00
m_gray_peerlist_housekeeping_interval.do_call(boost::bind(&node_server<t_payload_net_handler>::gray_peerlist_housekeeping, this));
2014-03-03 22:07:58 +00:00
m_peerlist_store_interval.do_call(boost::bind(&node_server<t_payload_net_handler>::store_config, this));
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::peer_sync_idle_maker()
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("STARTED PEERLIST IDLE HANDSHAKE");
2014-05-25 17:06:40 +00:00
typedef std::list<std::pair<epee::net_utils::connection_context_base, peerid_type> > local_connects_type;
2014-03-03 22:07:58 +00:00
local_connects_type cncts;
2017-06-04 21:37:53 +00:00
m_net_server.get_config_object().foreach_connection([&](p2p_connection_context& cntxt)
2014-03-03 22:07:58 +00:00
{
2017-06-04 21:37:53 +00:00
if(cntxt.peer_id && !cntxt.m_in_timedsync)
{
cntxt.m_in_timedsync = true;
2014-03-03 22:07:58 +00:00
cncts.push_back(local_connects_type::value_type(cntxt, cntxt.peer_id));//do idle sync only with handshaked connections
2017-06-04 21:37:53 +00:00
}
2014-03-03 22:07:58 +00:00
return true;
});
std::for_each(cncts.begin(), cncts.end(), [&](const typename local_connects_type::value_type& vl){do_peer_timed_sync(vl.first, vl.second);});
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MDEBUG("FINISHED PEERLIST IDLE HANDSHAKE");
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::fix_time_delta(std::list<peerlist_entry>& local_peerlist, time_t local_time, int64_t& delta)
{
//fix time delta
time_t now = 0;
time(&now);
delta = now - local_time;
2017-01-22 20:38:10 +00:00
for(peerlist_entry& be: local_peerlist)
2014-03-03 22:07:58 +00:00
{
if(be.last_seen > local_time)
{
2017-05-27 10:35:54 +00:00
MWARNING("FOUND FUTURE peerlist for entry " << be.adr.str() << " last_seen: " << be.last_seen << ", local_time(on remote node):" << local_time);
2014-03-03 22:07:58 +00:00
return false;
}
be.last_seen += delta;
}
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2014-05-25 17:06:40 +00:00
bool node_server<t_payload_net_handler>::handle_remote_peerlist(const std::list<peerlist_entry>& peerlist, time_t local_time, const epee::net_utils::connection_context_base& context)
2014-03-03 22:07:58 +00:00
{
int64_t delta = 0;
std::list<peerlist_entry> peerlist_ = peerlist;
if(!fix_time_delta(peerlist_, local_time, delta))
return false;
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, "REMOTE PEERLIST: TIME_DELTA: " << delta << ", remote peerlist size=" << peerlist_.size());
LOG_DEBUG_CC(context, "REMOTE PEERLIST: " << print_peerlist_to_string(peerlist_));
2014-03-03 22:07:58 +00:00
return m_peerlist.merge_peerlist(peerlist_);
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::get_local_node_data(basic_node_data& node_data)
{
2014-04-30 17:52:21 +00:00
time_t local_time;
time(&local_time);
node_data.local_time = local_time;
2014-03-03 22:07:58 +00:00
node_data.peer_id = m_config.m_peer_id;
if(!m_hide_my_port)
node_data.my_port = m_external_port ? m_external_port : m_listenning_port;
2015-12-14 04:54:39 +00:00
else
2014-03-03 22:07:58 +00:00
node_data.my_port = 0;
2014-07-16 17:30:15 +00:00
node_data.network_id = m_network_id;
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
#ifdef ALLOW_DEBUG_COMMANDS
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::check_trust(const proof_of_trust& tr)
{
uint64_t local_time = time(NULL);
uint64_t time_delata = local_time > tr.time ? local_time - tr.time: tr.time - local_time;
if(time_delata > 24*60*60 )
{
2017-08-01 09:39:36 +00:00
MWARNING("check_trust failed to check time conditions, local_time=" << local_time << ", proof_time=" << tr.time);
2014-03-03 22:07:58 +00:00
return false;
}
if(m_last_stat_request_time >= tr.time )
{
2017-08-01 09:39:36 +00:00
MWARNING("check_trust failed to check time conditions, last_stat_request_time=" << m_last_stat_request_time << ", proof_time=" << tr.time);
2014-03-03 22:07:58 +00:00
return false;
}
if(m_config.m_peer_id != tr.peer_id)
{
2017-08-01 09:39:36 +00:00
MWARNING("check_trust failed: peer_id mismatch (passed " << tr.peer_id << ", expected " << m_config.m_peer_id<< ")");
2014-03-03 22:07:58 +00:00
return false;
}
crypto::public_key pk = AUTO_VAL_INIT(pk);
2014-09-05 02:14:36 +00:00
epee::string_tools::hex_to_pod(::config::P2P_REMOTE_DEBUG_TRUSTED_PUB_KEY, pk);
2017-07-27 14:46:47 +00:00
crypto::hash h = get_proof_of_trust_hash(tr);
2014-03-03 22:07:58 +00:00
if(!crypto::check_signature(h, pk, tr.sign))
{
2017-08-01 09:39:36 +00:00
MWARNING("check_trust failed: sign check failed");
2014-03-03 22:07:58 +00:00
return false;
}
//update last request time
m_last_stat_request_time = tr.time;
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
int node_server<t_payload_net_handler>::handle_get_stat_info(int command, typename COMMAND_REQUEST_STAT_INFO::request& arg, typename COMMAND_REQUEST_STAT_INFO::response& rsp, p2p_connection_context& context)
{
if(!check_trust(arg.tr))
{
drop_connection(context);
return 1;
}
rsp.connections_count = m_net_server.get_config_object().get_connections_count();
rsp.incoming_connections_count = rsp.connections_count - get_outgoing_connections_count();
2014-09-12 11:06:51 +00:00
rsp.version = MONERO_VERSION_FULL;
2014-03-03 22:07:58 +00:00
rsp.os_version = tools::get_os_version_string();
m_payload_handler.get_stat_info(rsp.payload_info);
return 1;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
int node_server<t_payload_net_handler>::handle_get_network_state(int command, COMMAND_REQUEST_NETWORK_STATE::request& arg, COMMAND_REQUEST_NETWORK_STATE::response& rsp, p2p_connection_context& context)
{
if(!check_trust(arg.tr))
{
drop_connection(context);
return 1;
}
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
connection_entry ce;
2017-05-27 10:35:54 +00:00
ce.adr = cntxt.m_remote_address;
2014-03-03 22:07:58 +00:00
ce.id = cntxt.peer_id;
ce.is_income = cntxt.m_is_income;
rsp.connections_list.push_back(ce);
return true;
});
m_peerlist.get_peerlist_full(rsp.local_peerlist_gray, rsp.local_peerlist_white);
rsp.my_id = m_config.m_peer_id;
rsp.local_time = time(NULL);
return 1;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
int node_server<t_payload_net_handler>::handle_get_peer_id(int command, COMMAND_REQUEST_PEER_ID::request& arg, COMMAND_REQUEST_PEER_ID::response& rsp, p2p_connection_context& context)
{
rsp.my_id = m_config.m_peer_id;
return 1;
}
#endif
2016-10-26 19:00:08 +00:00
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
int node_server<t_payload_net_handler>::handle_get_support_flags(int command, COMMAND_REQUEST_SUPPORT_FLAGS::request& arg, COMMAND_REQUEST_SUPPORT_FLAGS::response& rsp, p2p_connection_context& context)
{
rsp.support_flags = m_config.m_support_flags;
return 1;
}
2014-03-03 22:07:58 +00:00
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
void node_server<t_payload_net_handler>::request_callback(const epee::net_utils::connection_context_base& context)
{
m_net_server.get_config_object().request_callback(context.m_connection_id);
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2016-11-29 16:21:33 +00:00
bool node_server<t_payload_net_handler>::relay_notify_to_list(int command, const std::string& data_buff, const std::list<boost::uuids::uuid> &connections)
{
2017-01-22 20:38:10 +00:00
for(const auto& c_id: connections)
2016-11-29 16:21:33 +00:00
{
m_net_server.get_config_object().notify(command, data_buff, c_id);
}
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2014-03-03 22:07:58 +00:00
bool node_server<t_payload_net_handler>::relay_notify_to_all(int command, const std::string& data_buff, const epee::net_utils::connection_context_base& context)
{
std::list<boost::uuids::uuid> connections;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
if(cntxt.peer_id && context.m_connection_id != cntxt.m_connection_id)
connections.push_back(cntxt.m_connection_id);
return true;
});
2016-11-29 16:21:33 +00:00
return relay_notify_to_list(command, data_buff, connections);
2014-03-03 22:07:58 +00:00
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
void node_server<t_payload_net_handler>::callback(p2p_connection_context& context)
{
m_payload_handler.on_callback(context);
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::invoke_notify_to_peer(int command, const std::string& req_buff, const epee::net_utils::connection_context_base& context)
{
int res = m_net_server.get_config_object().notify(command, req_buff, context.m_connection_id);
return res > 0;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::invoke_command_to_peer(int command, const std::string& req_buff, std::string& resp_buff, const epee::net_utils::connection_context_base& context)
{
int res = m_net_server.get_config_object().invoke(command, req_buff, resp_buff, context.m_connection_id);
return res > 0;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::drop_connection(const epee::net_utils::connection_context_base& context)
{
m_net_server.get_config_object().close(context.m_connection_id);
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler> template<class t_callback>
bool node_server<t_payload_net_handler>::try_ping(basic_node_data& node_data, p2p_connection_context& context, t_callback cb)
{
if(!node_data.my_port)
return false;
2017-06-28 08:00:29 +00:00
CHECK_AND_ASSERT_MES(context.m_remote_address.get_type_id() == epee::net_utils::ipv4_network_address::ID, false,
"Only IPv4 addresses are supported here");
2017-05-27 10:35:54 +00:00
const epee::net_utils::network_address na = context.m_remote_address;
uint32_t actual_ip = na.as<const epee::net_utils::ipv4_network_address>().ip();
if(!m_peerlist.is_host_allowed(context.m_remote_address))
2014-03-03 22:07:58 +00:00
return false;
2014-05-25 17:06:40 +00:00
std::string ip = epee::string_tools::get_ip_string_from_int32(actual_ip);
std::string port = epee::string_tools::num_to_string_fast(node_data.my_port);
2017-05-27 10:35:54 +00:00
epee::net_utils::network_address address(new epee::net_utils::ipv4_network_address(actual_ip, node_data.my_port));
2014-03-03 22:07:58 +00:00
peerid_type pr = node_data.peer_id;
2017-05-27 10:35:54 +00:00
bool r = m_net_server.connect_async(ip, port, m_config.m_net_config.ping_connection_timeout, [cb, /*context,*/ address, pr, this](
2014-03-03 22:07:58 +00:00
const typename net_server::t_connection_context& ping_context,
const boost::system::error_code& ec)->bool
{
if(ec)
{
2017-05-27 10:35:54 +00:00
LOG_WARNING_CC(ping_context, "back ping connect failed to " << address.str());
2014-03-03 22:07:58 +00:00
return false;
}
COMMAND_PING::request req;
COMMAND_PING::response rsp;
//vc2010 workaround
/*std::string ip_ = ip;
std::string port_=port;
peerid_type pr_ = pr;
auto cb_ = cb;*/
2015-05-26 05:07:17 +00:00
// GCC 5.1.0 gives error with second use of uint64_t (peerid_type) variable.
peerid_type pr_ = pr;
2014-05-25 17:06:40 +00:00
bool inv_call_res = epee::net_utils::async_invoke_remote_command2<COMMAND_PING::response>(ping_context.m_connection_id, COMMAND_PING::ID, req, m_net_server.get_config_object(),
2014-03-03 22:07:58 +00:00
[=](int code, const COMMAND_PING::response& rsp, p2p_connection_context& context)
{
if(code <= 0)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(ping_context, "Failed to invoke COMMAND_PING to " << address.str() << "(" << code << ", " << epee::levin::get_err_descr(code) << ")");
2014-03-03 22:07:58 +00:00
return;
}
if(rsp.status != PING_OK_RESPONSE_STATUS_TEXT || pr != rsp.peer_id)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(ping_context, "back ping invoke wrong response \"" << rsp.status << "\" from" << address.str() << ", hsh_peer_id=" << pr_ << ", rsp.peer_id=" << rsp.peer_id);
2016-03-13 17:53:27 +00:00
m_net_server.get_config_object().close(ping_context.m_connection_id);
2014-03-03 22:07:58 +00:00
return;
}
m_net_server.get_config_object().close(ping_context.m_connection_id);
cb();
});
if(!inv_call_res)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(ping_context, "back ping invoke failed to " << address.str());
2014-03-03 22:07:58 +00:00
m_net_server.get_config_object().close(ping_context.m_connection_id);
return false;
}
return true;
});
if(!r)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "Failed to call connect_async, network error.");
2014-03-03 22:07:58 +00:00
}
return r;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2016-10-26 19:00:08 +00:00
bool node_server<t_payload_net_handler>::try_get_support_flags(const p2p_connection_context& context, std::function<void(p2p_connection_context&, const uint32_t&)> f)
{
COMMAND_REQUEST_SUPPORT_FLAGS::request support_flags_request;
bool r = epee::net_utils::async_invoke_remote_command2<typename COMMAND_REQUEST_SUPPORT_FLAGS::response>
(
context.m_connection_id,
COMMAND_REQUEST_SUPPORT_FLAGS::ID,
support_flags_request,
m_net_server.get_config_object(),
[=](int code, const typename COMMAND_REQUEST_SUPPORT_FLAGS::response& rsp, p2p_connection_context& context_)
{
if(code < 0)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context_, "COMMAND_REQUEST_SUPPORT_FLAGS invoke failed. (" << code << ", " << epee::levin::get_err_descr(code) << ")");
2016-10-26 19:00:08 +00:00
return;
}
f(context_, rsp.support_flags);
},
P2P_DEFAULT_HANDSHAKE_INVOKE_TIMEOUT
);
return r;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
2014-03-03 22:07:58 +00:00
int node_server<t_payload_net_handler>::handle_timed_sync(int command, typename COMMAND_TIMED_SYNC::request& arg, typename COMMAND_TIMED_SYNC::response& rsp, p2p_connection_context& context)
{
if(!m_payload_handler.process_payload_sync_data(arg.payload_data, context, false))
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "Failed to process_payload_sync_data(), dropping connection");
2014-03-03 22:07:58 +00:00
drop_connection(context);
return 1;
}
//fill response
rsp.local_time = time(NULL);
2017-05-27 10:35:54 +00:00
m_peerlist.get_peerlist_head(rsp.local_peerlist_new);
2014-03-03 22:07:58 +00:00
m_payload_handler.get_payload_sync_data(rsp.payload_data);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, "COMMAND_TIMED_SYNC");
2014-03-03 22:07:58 +00:00
return 1;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
int node_server<t_payload_net_handler>::handle_handshake(int command, typename COMMAND_HANDSHAKE::request& arg, typename COMMAND_HANDSHAKE::response& rsp, p2p_connection_context& context)
{
2014-07-16 17:30:15 +00:00
if(arg.node_data.network_id != m_network_id)
2014-03-03 22:07:58 +00:00
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_INFO_CC(context, "WRONG NETWORK AGENT CONNECTED! id=" << epee::string_tools::get_str_from_guid_a(arg.node_data.network_id));
2014-03-03 22:07:58 +00:00
drop_connection(context);
2017-05-27 10:35:54 +00:00
add_host_fail(context.m_remote_address);
2014-03-03 22:07:58 +00:00
return 1;
}
if(!context.m_is_income)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE came not from incoming connection");
2014-03-03 22:07:58 +00:00
drop_connection(context);
2017-05-27 10:35:54 +00:00
add_host_fail(context.m_remote_address);
2014-03-03 22:07:58 +00:00
return 1;
}
if(context.peer_id)
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE came, but seems that connection already have associated peer_id (double COMMAND_HANDSHAKE?)");
2014-03-03 22:07:58 +00:00
drop_connection(context);
return 1;
}
if(!m_payload_handler.process_payload_sync_data(arg.payload_data, context, true))
{
2017-08-01 09:39:36 +00:00
LOG_WARNING_CC(context, "COMMAND_HANDSHAKE came, but process_payload_sync_data returned false, dropping connection.");
2014-03-03 22:07:58 +00:00
drop_connection(context);
return 1;
}
2017-01-14 12:21:20 +00:00
2017-05-27 10:35:54 +00:00
if(has_too_many_connections(context.m_remote_address))
2017-01-14 12:21:20 +00:00
{
2017-05-27 10:35:54 +00:00
LOG_PRINT_CCONTEXT_L1("CONNECTION FROM " << context.m_remote_address.host_str() << " REFUSED, too many connections from the same address");
2017-01-14 12:21:20 +00:00
drop_connection(context);
return 1;
}
2014-03-03 22:07:58 +00:00
//associate peer_id with this connection
context.peer_id = arg.node_data.peer_id;
2017-08-08 16:23:02 +00:00
context.m_in_timedsync = false;
2014-03-03 22:07:58 +00:00
if(arg.node_data.peer_id != m_config.m_peer_id && arg.node_data.my_port)
{
peerid_type peer_id_l = arg.node_data.peer_id;
2016-10-26 19:00:08 +00:00
uint32_t port_l = arg.node_data.my_port;
2014-03-03 22:07:58 +00:00
//try ping to be sure that we can add this peer to peer_list
try_ping(arg.node_data, context, [peer_id_l, port_l, context, this]()
{
2017-06-28 08:00:29 +00:00
CHECK_AND_ASSERT_MES(context.m_remote_address.get_type_id() == epee::net_utils::ipv4_network_address::ID, void(),
"Only IPv4 addresses are supported here");
2014-03-03 22:07:58 +00:00
//called only(!) if success pinged, update local peerlist
peerlist_entry pe;
2017-05-27 10:35:54 +00:00
const epee::net_utils::network_address na = context.m_remote_address;
pe.adr.reset(new epee::net_utils::ipv4_network_address(na.as<epee::net_utils::ipv4_network_address>().ip(), port_l));
2014-08-20 15:57:29 +00:00
time_t last_seen;
time(&last_seen);
pe.last_seen = static_cast<int64_t>(last_seen);
2014-03-03 22:07:58 +00:00
pe.id = peer_id_l;
this->m_peerlist.append_with_peer_white(pe);
2017-05-27 10:35:54 +00:00
LOG_DEBUG_CC(context, "PING SUCCESS " << context.m_remote_address.host_str() << ":" << port_l);
2014-03-03 22:07:58 +00:00
});
}
2016-10-26 19:00:08 +00:00
try_get_support_flags(context, [](p2p_connection_context& flags_context, const uint32_t& support_flags)
{
flags_context.support_flags = support_flags;
});
2014-03-03 22:07:58 +00:00
//fill response
2017-05-27 10:35:54 +00:00
m_peerlist.get_peerlist_head(rsp.local_peerlist_new);
2014-03-03 22:07:58 +00:00
get_local_node_data(rsp.node_data);
m_payload_handler.get_payload_sync_data(rsp.payload_data);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, "COMMAND_HANDSHAKE");
2014-03-03 22:07:58 +00:00
return 1;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
int node_server<t_payload_net_handler>::handle_ping(int command, COMMAND_PING::request& arg, COMMAND_PING::response& rsp, p2p_connection_context& context)
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
LOG_DEBUG_CC(context, "COMMAND_PING");
2014-03-03 22:07:58 +00:00
rsp.status = PING_OK_RESPONSE_STATUS_TEXT;
rsp.peer_id = m_config.m_peer_id;
return 1;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::log_peerlist()
{
2016-12-04 13:13:54 +00:00
std::list<peerlist_entry> pl_white;
2014-03-03 22:07:58 +00:00
std::list<peerlist_entry> pl_gray;
2016-12-04 13:13:54 +00:00
m_peerlist.get_peerlist_full(pl_gray, pl_white);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO(ENDL << "Peerlist white:" << ENDL << print_peerlist_to_string(pl_white) << ENDL << "Peerlist gray:" << ENDL << print_peerlist_to_string(pl_gray) );
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::log_connections()
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Connections: \r\n" << print_connections_container() );
2014-03-03 22:07:58 +00:00
return true;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
std::string node_server<t_payload_net_handler>::print_connections_container()
{
std::stringstream ss;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
2017-05-27 10:35:54 +00:00
ss << cntxt.m_remote_address.str()
2014-03-03 22:07:58 +00:00
<< " \t\tpeer_id " << cntxt.peer_id
2014-05-25 17:06:40 +00:00
<< " \t\tconn_id " << epee::string_tools::get_str_from_guid_a(cntxt.m_connection_id) << (cntxt.m_is_income ? " INC":" OUT")
2014-03-03 22:07:58 +00:00
<< std::endl;
return true;
});
std::string s = ss.str();
return s;
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
void node_server<t_payload_net_handler>::on_connection_new(p2p_connection_context& context)
{
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("["<< epee::net_utils::print_connection_context(context) << "] NEW CONNECTION");
2014-03-03 22:07:58 +00:00
}
//-----------------------------------------------------------------------------------
template<class t_payload_net_handler>
void node_server<t_payload_net_handler>::on_connection_close(p2p_connection_context& context)
{
2017-02-09 00:11:58 +00:00
if (!m_net_server.is_stop_signal_sent() && !context.m_is_income) {
2017-05-27 10:35:54 +00:00
epee::net_utils::network_address na = AUTO_VAL_INIT(na);
na = context.m_remote_address;
2017-02-09 00:11:58 +00:00
m_peerlist.remove_from_peer_anchor(na);
}
2017-08-18 19:14:23 +00:00
m_payload_handler.on_connection_close(context);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("["<< epee::net_utils::print_connection_context(context) << "] CLOSE CONNECTION");
2014-05-25 17:06:40 +00:00
}
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::is_priority_node(const epee::net_utils::network_address& na)
2014-05-25 17:06:40 +00:00
{
return (std::find(m_priority_peers.begin(), m_priority_peers.end(), na) != m_priority_peers.end()) || (std::find(m_exclusive_peers.begin(), m_exclusive_peers.end(), na) != m_exclusive_peers.end());
}
template<class t_payload_net_handler> template <class Container>
bool node_server<t_payload_net_handler>::connect_to_peerlist(const Container& peers)
{
2017-05-27 10:35:54 +00:00
for(const epee::net_utils::network_address& na: peers)
2014-05-25 17:06:40 +00:00
{
if(m_net_server.is_stop_signal_sent())
return false;
if(is_addr_connected(na))
continue;
try_to_connect_and_handshake_with_new_peer(na);
}
return true;
}
template<class t_payload_net_handler> template <class Container>
bool node_server<t_payload_net_handler>::parse_peers_and_add_to_container(const boost::program_options::variables_map& vm, const command_line::arg_descriptor<std::vector<std::string> > & arg, Container& container)
{
std::vector<std::string> perrs = command_line::get_arg(vm, arg);
for(const std::string& pr_str: perrs)
{
2017-05-27 10:35:54 +00:00
epee::net_utils::network_address na = AUTO_VAL_INIT(na);
const uint16_t default_port = m_testnet ? ::config::testnet::P2P_DEFAULT_PORT : ::config::P2P_DEFAULT_PORT;
bool r = parse_peer_from_string(na, pr_str, default_port);
2014-05-25 17:06:40 +00:00
CHECK_AND_ASSERT_MES(r, false, "Failed to parse address from string: " << pr_str);
container.push_back(na);
}
return true;
2014-03-03 22:07:58 +00:00
}
2015-12-14 04:54:39 +00:00
2015-01-05 19:30:17 +00:00
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::set_max_out_peers(const boost::program_options::variables_map& vm, int64_t max)
2015-12-14 04:54:39 +00:00
{
if(max == -1) {
m_config.m_net_config.connections_count = P2P_DEFAULT_CONNECTIONS_COUNT;
return true;
}
m_config.m_net_config.connections_count = max;
return true;
}
2015-01-05 19:30:17 +00:00
template<class t_payload_net_handler>
void node_server<t_payload_net_handler>::delete_connections(size_t count)
{
2015-12-14 04:54:39 +00:00
m_net_server.get_config_object().del_out_connections(count);
2015-01-05 19:30:17 +00:00
}
2015-12-14 04:54:39 +00:00
template<class t_payload_net_handler>
2015-01-05 19:30:17 +00:00
bool node_server<t_payload_net_handler>::set_tos_flag(const boost::program_options::variables_map& vm, int flag)
2015-12-14 04:54:39 +00:00
{
if(flag==-1){
return true;
}
epee::net_utils::connection<epee::levin::async_protocol_handler<p2p_connection_context> >::set_tos_flag(flag);
_dbg1("Set ToS flag " << flag);
return true;
}
2015-01-05 19:30:17 +00:00
template<class t_payload_net_handler>
2015-12-14 04:54:39 +00:00
bool node_server<t_payload_net_handler>::set_rate_up_limit(const boost::program_options::variables_map& vm, int64_t limit)
{
this->islimitup=true;
if (limit==-1) {
limit=default_limit_up;
this->islimitup=false;
}
limit *= 1024;
epee::net_utils::connection<epee::levin::async_protocol_handler<p2p_connection_context> >::set_rate_up_limit( limit );
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Set limit-up to " << limit/1024 << " kB/s");
2015-12-14 04:54:39 +00:00
return true;
}
2015-01-05 19:30:17 +00:00
template<class t_payload_net_handler>
2015-12-14 04:54:39 +00:00
bool node_server<t_payload_net_handler>::set_rate_down_limit(const boost::program_options::variables_map& vm, int64_t limit)
{
this->islimitdown=true;
if(limit==-1) {
limit=default_limit_down;
this->islimitdown=false;
}
limit *= 1024;
epee::net_utils::connection<epee::levin::async_protocol_handler<p2p_connection_context> >::set_rate_down_limit( limit );
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Set limit-down to " << limit/1024 << " kB/s");
2015-12-14 04:54:39 +00:00
return true;
}
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::set_rate_limit(const boost::program_options::variables_map& vm, int64_t limit)
{
int64_t limit_up = 0;
int64_t limit_down = 0;
2015-01-05 19:30:17 +00:00
2015-12-14 04:54:39 +00:00
if(limit == -1)
{
limit_up = default_limit_up * 1024;
limit_down = default_limit_down * 1024;
}
else
{
limit_up = limit * 1024;
limit_down = limit * 1024;
}
if(!this->islimitup) {
epee::net_utils::connection<epee::levin::async_protocol_handler<p2p_connection_context> >::set_rate_up_limit(limit_up);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Set limit-up to " << limit_up/1024 << " kB/s");
2015-12-14 04:54:39 +00:00
}
if(!this->islimitdown) {
epee::net_utils::connection<epee::levin::async_protocol_handler<p2p_connection_context> >::set_rate_down_limit(limit_down);
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.
To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:
This one is (mostly) silent, only outputting fatal errors:
MONERO_LOGS=*:FATAL
This one is very verbose:
MONERO_LOGS=*:TRACE
This one is totally silent (logwise):
MONERO_LOGS=""
This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):
MONERO_LOGS=*:WARNING,verify:FATAL
Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE
Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:
MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE
Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.
Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.
The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-01 16:34:23 +00:00
MINFO("Set limit-down to " << limit_down/1024 << " kB/s");
2015-12-14 04:54:39 +00:00
}
return true;
}
2017-01-14 12:21:20 +00:00
template<class t_payload_net_handler>
2017-05-27 10:35:54 +00:00
bool node_server<t_payload_net_handler>::has_too_many_connections(const epee::net_utils::network_address &address)
2017-01-14 12:21:20 +00:00
{
2017-01-16 17:16:32 +00:00
const uint8_t max_connections = 1;
2017-01-14 12:21:20 +00:00
uint8_t count = 0;
m_net_server.get_config_object().foreach_connection([&](const p2p_connection_context& cntxt)
{
2017-05-27 10:35:54 +00:00
if (cntxt.m_is_income && cntxt.m_remote_address.is_same_host(address)) {
2017-01-14 12:21:20 +00:00
count++;
if (count > max_connections) {
return false;
}
}
return true;
});
return count > max_connections;
}
2017-01-20 23:59:04 +00:00
template<class t_payload_net_handler>
bool node_server<t_payload_net_handler>::gray_peerlist_housekeeping()
{
peerlist_entry pe = AUTO_VAL_INIT(pe);
2017-01-21 12:04:49 +00:00
if (!m_peerlist.get_random_gray_peer(pe)) {
2017-01-20 23:59:04 +00:00
return false;
}
bool success = check_connection_and_handshake_with_peer(pe.adr, pe.last_seen);
if (!success) {
m_peerlist.remove_from_peer_gray(pe);
2017-08-20 20:15:53 +00:00
LOG_PRINT_L2("PEER EVICTED FROM GRAY PEER LIST IP address: " << pe.adr.host_str() << " Peer ID: " << peerid_type(pe.id));
2017-01-20 23:59:04 +00:00
return true;
}
2017-01-21 09:11:32 +00:00
m_peerlist.set_peer_just_seen(pe.id, pe.adr);
2017-01-20 23:59:04 +00:00
2017-08-20 20:15:53 +00:00
LOG_PRINT_L2("PEER PROMOTED TO WHITE PEER LIST IP address: " << pe.adr.host_str() << " Peer ID: " << peerid_type(pe.id));
2017-01-20 23:59:04 +00:00
return true;
}
2014-03-03 22:07:58 +00:00
}