98 lines
3.4 KiB
Python
98 lines
3.4 KiB
Python
# Example of detecting and reading a block from a MiFare classic NFC card.
|
|
# Author: Tony DiCola & Roberto Laricchia
|
|
# MiFare Classic modification: Francesco Crisafulli
|
|
#
|
|
# Copyright (c) 2015 Adafruit Industries
|
|
#
|
|
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
# of this software and associated documentation files (the "Software"), to deal
|
|
# in the Software without restriction, including without limitation the rights
|
|
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
# copies of the Software, and to permit persons to whom the Software is
|
|
# furnished to do so, subject to the following conditions:
|
|
#
|
|
# The above copyright notice and this permission notice shall be included in all
|
|
# copies or substantial portions of the Software.
|
|
#
|
|
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
# SOFTWARE.
|
|
|
|
"""
|
|
This example shows connecting to the PN532 and writing & reading a mifare classic
|
|
type RFID tag
|
|
"""
|
|
|
|
import board
|
|
import busio
|
|
#
|
|
# NOTE: pick the import that matches the interface being used
|
|
#
|
|
from adafruit_pn532.adafruit_pn532 import MIFARE_CMD_AUTH_B
|
|
from adafruit_pn532.i2c import PN532_I2C
|
|
#from adafruit_pn532.spi import PN532_SPI
|
|
#from adafruit_pn532.uart import PN532_UART
|
|
|
|
# I2C connection:
|
|
i2c = busio.I2C(board.SCL, board.SDA)
|
|
|
|
# Non-hardware reset/request with I2C
|
|
pn532 = PN532_I2C(i2c, debug=False)
|
|
|
|
# With I2C, we recommend connecting RSTPD_N (reset) to a digital pin for manual
|
|
# harware reset
|
|
#reset_pin = DigitalInOut(board.D6)
|
|
# On Raspberry Pi, you must also connect a pin to P32 "H_Request" for hardware
|
|
# wakeup! this means we don't need to do the I2C clock-stretch thing
|
|
#req_pin = DigitalInOut(board.D12)
|
|
#pn532 = PN532_I2C(i2c, debug=False, reset=reset_pin, req=req_pin)
|
|
|
|
# SPI connection:
|
|
#spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
|
|
#cs_pin = DigitalInOut(board.D5)
|
|
#pn532 = PN532_SPI(spi, cs_pin, debug=False)
|
|
|
|
# UART connection
|
|
#uart = busio.UART(board.TX, board.RX, baudrate=115200, timeout=100)
|
|
#pn532 = PN532_UART(uart, debug=False)
|
|
|
|
ic, ver, rev, support = pn532.get_firmware_version()
|
|
print('Found PN532 with firmware version: {0}.{1}'.format(ver, rev))
|
|
|
|
# Configure PN532 to communicate with MiFare cards
|
|
pn532.SAM_configuration()
|
|
|
|
print('Waiting for RFID/NFC card to write to!')
|
|
|
|
key = b'\xFF\xFF\xFF\xFF\xFF\xFF'
|
|
|
|
while True:
|
|
# Check if a card is available to read
|
|
uid = pn532.read_passive_target(timeout=0.5)
|
|
print('.', end="")
|
|
# Try again if no card is available.
|
|
if uid is not None:
|
|
break
|
|
|
|
print("")
|
|
|
|
print('Found card with UID:', [hex(i) for i in uid])
|
|
print("Authenticating block 4 ...")
|
|
|
|
authenticated = pn532.mifare_classic_authenticate_block(uid, 4, MIFARE_CMD_AUTH_B, key)
|
|
if not authenticated:
|
|
print("Authentication failed!")
|
|
|
|
# Set 16 bytes of block to 0xFEEDBEEF
|
|
data = bytearray(16)
|
|
data[0:16] = b'\xFE\xED\xBE\xEF\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
|
|
|
|
# Write 16 byte block.
|
|
pn532.mifare_classic_write_block(4, data)
|
|
# Read block #6
|
|
print('Wrote to block 4, now trying to read that data:',
|
|
[hex(x) for x in pn532.mifare_classic_read_block(4)])
|