Add low power example
This commit is contained in:
parent
b756ef243e
commit
e9dbe2d4fb
1 changed files with 59 additions and 0 deletions
59
examples/pn532_low_power.py
Normal file
59
examples/pn532_low_power.py
Normal file
|
@ -0,0 +1,59 @@
|
|||
"""
|
||||
This example shows connecting to the PN532 with I2C (requires clock
|
||||
stretching support), SPI, or UART. SPI is best, it uses the most pins but
|
||||
is the most reliable and universally supported. In this example we put the PN532
|
||||
into low power mode and sleep for 1 second in-between trying to read tags.
|
||||
After initialization, try waving various 13.56MHz RFID cards over it!
|
||||
"""
|
||||
|
||||
import time
|
||||
import board
|
||||
import busio
|
||||
from digitalio import DigitalInOut
|
||||
|
||||
#
|
||||
# NOTE: pick the import that matches the interface being used
|
||||
#
|
||||
from adafruit_pn532.i2c import PN532_I2C
|
||||
|
||||
# from adafruit_pn532.spi import PN532_SPI
|
||||
# from adafruit_pn532.uart import PN532_UART
|
||||
|
||||
# I2C connection:
|
||||
i2c = busio.I2C(board.SCL, board.SDA)
|
||||
|
||||
# Non-hardware
|
||||
# pn532 = PN532_I2C(i2c, debug=False)
|
||||
|
||||
# With I2C, we recommend connecting RSTPD_N (reset) to a digital pin for manual
|
||||
# harware reset
|
||||
reset_pin = DigitalInOut(board.D6)
|
||||
# On Raspberry Pi, you must also connect a pin to P32 "H_Request" for hardware
|
||||
# wakeup! this means we don't need to do the I2C clock-stretch thing
|
||||
req_pin = DigitalInOut(board.D12)
|
||||
pn532 = PN532_I2C(i2c, debug=False, reset=reset_pin, req=req_pin)
|
||||
|
||||
# SPI connection:
|
||||
# spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
|
||||
# cs_pin = DigitalInOut(board.D5)
|
||||
# pn532 = PN532_SPI(spi, cs_pin, debug=False)
|
||||
|
||||
# UART connection
|
||||
# uart = busio.UART(board.TX, board.RX, baudrate=115200, timeout=0.1)
|
||||
# pn532 = PN532_UART(uart, debug=False)
|
||||
|
||||
ic, ver, rev, support = pn532.firmware_version
|
||||
print("Found PN532 with firmware version: {0}.{1}".format(ver, rev))
|
||||
|
||||
# Configure PN532 to communicate with MiFare cards
|
||||
pn532.SAM_configuration()
|
||||
|
||||
print("Waiting for RFID/NFC card...")
|
||||
while True:
|
||||
# Check if a card is available to read
|
||||
uid = pn532.read_passive_target(timeout=0.5)
|
||||
print(".", end="")
|
||||
if uid is not None:
|
||||
print("Found card with UID:", [hex(i) for i in uid])
|
||||
pn532.power_down()
|
||||
time.sleep(1.0)
|
Loading…
Reference in a new issue