38 lines
1.1 KiB
Python
38 lines
1.1 KiB
Python
|
from Adafruit_Circuitpython_PN532 import adafruit_pn532
|
||
|
|
from digitalio import DigitalInOut, Direction, Pull
|
||
|
|
import board
|
||
|
|
import time
|
||
|
|
import busio
|
||
|
|
|
||
|
|
reset_pin = DigitalInOut(board.D3)
|
||
|
|
|
||
|
|
|
||
|
|
# I2C connection:
|
||
|
|
#i2c = busio.I2C(board.SCL, board.SDA)
|
||
|
|
#pn532 = adafruit_pn532.PN532_I2C(i2c, debug=False, reset=reset_pin)
|
||
|
|
|
||
|
|
# SPI connection:
|
||
|
|
#spi = busio.SPI(board.SCK, board.MOSI, board.MISO)
|
||
|
|
#cs_pin = DigitalInOut(board.D2)
|
||
|
|
#pn532 = adafruit_pn532.PN532_SPI(spi, cs_pin, debug=False, reset=reset_pin)
|
||
|
|
|
||
|
|
# UART connection
|
||
|
|
#uart = busio.UART(board.TX, board.RX, baudrate=115200, timeout=100)
|
||
|
|
#pn532 = adafruit_pn532.PN532_UART(uart, debug=False, reset=reset_pin)
|
||
|
|
|
||
|
|
ic, ver, rev, support = pn532.get_firmware_version()
|
||
|
|
print('Found PN532 with firmware version: {0}.{1}'.format(ver, rev))
|
||
|
|
|
||
|
|
# Configure PN532 to communicate with MiFare cards
|
||
|
|
pn532.SAM_configuration()
|
||
|
|
|
||
|
|
print('Waiting for MiFare card...')
|
||
|
|
while True:
|
||
|
|
# Check if a card is available to read
|
||
|
|
uid = pn532.read_passive_target(timeout=0.25)
|
||
|
|
print('.', end="", flush=True)
|
||
|
|
# Try again if no card is available.
|
||
|
|
if uid is None:
|
||
|
|
continue
|
||
|
|
print('Found card with UID:', [hex(i) for i in uid])
|