MFRC522-python/MFRC522.py
2013-07-01 07:33:43 +00:00

302 lines
7.6 KiB
Python

import RPi.GPIO as GPIO
import spi
import signal
class MFRC522:
NRSTPD = 22
MAX_LEN = 16
PCD_IDLE = 0x00
PCD_AUTHENT = 0x0E
PCD_RECEIVE = 0x08
PCD_TRANSMIT = 0x04
PCD_TRANSCEIVE = 0x0C
PCD_RESETPHASE = 0x0F
PCD_CALCCRC = 0x03
PICC_REQIDL = 0x26
PICC_REQALL = 0x52
PICC_ANTICOLL = 0x93
PICC_SElECTTAG = 0x93
PICC_AUTHENT1A = 0x60
PICC_AUTHENT1B = 0x61
PICC_READ = 0x30
PICC_WRITE = 0xA0
PICC_DECREMENT = 0xC0
PICC_INCREMENT = 0xC1
PICC_RESTORE = 0xC2
PICC_TRANSFER = 0xB0
PICC_HALT = 0x50
MI_OK = 0
MI_NOTAGERR = 1
MI_ERR = 2
Reserved00 = 0x00
CommandReg = 0x01
CommIEnReg = 0x02
DivlEnReg = 0x03
CommIrqReg = 0x04
DivIrqReg = 0x05
ErrorReg = 0x06
Status1Reg = 0x07
Status2Reg = 0x08
FIFODataReg = 0x09
FIFOLevelReg = 0x0A
WaterLevelReg = 0x0B
ControlReg = 0x0C
BitFramingReg = 0x0D
CollReg = 0x0E
Reserved01 = 0x0F
Reserved10 = 0x10
ModeReg = 0x11
TxModeReg = 0x12
RxModeReg = 0x13
TxControlReg = 0x14
TxAutoReg = 0x15
TxSelReg = 0x16
RxSelReg = 0x17
RxThresholdReg = 0x18
DemodReg = 0x19
Reserved11 = 0x1A
Reserved12 = 0x1B
MifareReg = 0x1C
Reserved13 = 0x1D
Reserved14 = 0x1E
SerialSpeedReg = 0x1F
Reserved20 = 0x20
CRCResultRegM = 0x21
CRCResultRegL = 0x22
Reserved21 = 0x23
ModWidthReg = 0x24
Reserved22 = 0x25
RFCfgReg = 0x26
GsNReg = 0x27
CWGsPReg = 0x28
ModGsPReg = 0x29
TModeReg = 0x2A
TPrescalerReg = 0x2B
TReloadRegH = 0x2C
TReloadRegL = 0x2D
TCounterValueRegH = 0x2E
TCounterValueRegL = 0x2F
Reserved30 = 0x30
TestSel1Reg = 0x31
TestSel2Reg = 0x32
TestPinEnReg = 0x33
TestPinValueReg = 0x34
TestBusReg = 0x35
AutoTestReg = 0x36
VersionReg = 0x37
AnalogTestReg = 0x38
TestDAC1Reg = 0x39
TestDAC2Reg = 0x3A
TestADCReg = 0x3B
Reserved31 = 0x3C
Reserved32 = 0x3D
Reserved33 = 0x3E
Reserved34 = 0x3F
serNum = []
writeData = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 100]
moneyConsume = 18
moneyAdd = 10
sectorKeyA = [
[0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF],
[0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF],
[0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF],
]
sectorNewKeyA = [
[0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF],
[0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0x19,0x84,0x07,0x15,0x76,0x14],
[0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xff,0x07,0x80,0x69, 0x19,0x33,0x07,0x15,0x34,0x14],
]
def __init__(self,spd=1000000):
spi.openSPI(speed=spd)
GPIO.setmode(GPIO.BOARD)
GPIO.setup(22, GPIO.OUT)
GPIO.output(self.NRSTPD, 1)
self.MFRC522_Init()
def MFRC522_Reset(self):
self.Write_MFRC522(self.CommandReg, self.PCD_RESETPHASE)
def Write_MFRC522(self,addr,val):
spi.transfer(((addr<<1)&0x7E,val))
def Read_MFRC522(self,addr):
val = spi.transfer((((addr<<1)&0x7E) | 0x80,0))
return val[1]
def SetBitMask(self, reg, mask):
tmp = self.Read_MFRC522(reg)
self.Write_MFRC522(reg, tmp | mask)
def ClearBitMask(self, reg, mask):
tmp = self.Read_MFRC522(reg);
self.Write_MFRC522(reg, tmp & (~mask))
def AntennaOn(self):
temp = self.Read_MFRC522(self.TxControlReg)
if(~(temp & 0x03)):
self.SetBitMask(self.TxControlReg, 0x03)
def AntennaOff(self):
self.ClearBitMask(self.TxControlReg, 0x03)
def MFRC522_ToCard(self,command,sendData):
backData = []
backLen = 0
status = self.MI_ERR
irqEn = 0x00
waitIRq = 0x00
lastBits = None
n = 0
i = 0
if command == self.PCD_AUTHENT:
irqEn = 0x12
waitIRq = 0x10
if command == self.PCD_TRANSCEIVE:
irqEn = 0x77
waitIRq = 0x30
self.Write_MFRC522(self.CommIEnReg, irqEn|0x80)
self.ClearBitMask(self.CommIrqReg, 0x80)
self.SetBitMask(self.FIFOLevelReg, 0x80)
self.Write_MFRC522(self.CommandReg, self.PCD_IDLE);
while(i<len(sendData)):
self.Write_MFRC522(self.FIFODataReg, sendData[i])
i = i+1
self.Write_MFRC522(self.CommandReg, command)
if command == self.PCD_TRANSCEIVE:
self.SetBitMask(self.BitFramingReg, 0x80)
i = 2000
while True:
n = self.Read_MFRC522(self.CommIrqReg)
i = i - 1
if ~((i!=0) and ~(n&0x01) and ~(n&waitIRq)):
break
self.ClearBitMask(self.BitFramingReg, 0x80)
if i != 0:
if (self.Read_MFRC522(self.ErrorReg) & 0x1B)==0x00:
status = self.MI_OK
if n & irqEn & 0x01:
status = self.MI_NOTAGERR
if command == self.PCD_TRANSCEIVE:
n = self.Read_MFRC522(self.FIFOLevelReg)
lastBits = self.Read_MFRC522(self.ControlReg) & 0x07
if lastBits != 0:
backLen = (n-1)*8 + lastBits
else:
backLen = n*8
if n == 0:
n = 1
if n > self.MAX_LEN:
n = self.MAX_LEN
i = 0
while i<n:
backData.append(self.Read_MFRC522(self.FIFODataReg))
i = i + 1;
else:
status = self.MI_ERR
return (status,backData,backLen)
def MFRC522_Request(self, reqMode):
status = None
backBits = None
TagType = []
self.Write_MFRC522(self.BitFramingReg, 0x07)
TagType.append(reqMode);
(status,backData,backBits) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE, TagType)
if ((status != self.MI_OK) | (backBits != 0x10)):
status = self.MI_ERR
return (status,backBits)
def MFRC522_Anticoll(self):
backData = []
serNumCheck = 0
serNum = []
self.Write_MFRC522(self.BitFramingReg, 0x00)
serNum.append(self.PICC_ANTICOLL)
serNum.append(0x20)
(status,backData,backBits) = self.MFRC522_ToCard(self.PCD_TRANSCEIVE,serNum)
if(status == self.MI_OK):
i = 0
if len(backData)==5:
while i<4:
serNumCheck = serNumCheck ^ backData[i]
i = i + 1
if serNumCheck != backData[i]:
status = self.MI_ERR
else:
status = self.MI_ERR
return (status,backData)
def MFRC522_Init(self):
GPIO.output(self.NRSTPD, 1)
self.MFRC522_Reset();
self.Write_MFRC522(self.TModeReg, 0x8D)
self.Write_MFRC522(self.TPrescalerReg, 0x3E)
self.Write_MFRC522(self.TReloadRegL, 30)
self.Write_MFRC522(self.TReloadRegH, 0)
self.Write_MFRC522(self.TxAutoReg, 0x40)
self.Write_MFRC522(self.ModeReg, 0x3D)
self.AntennaOn()
continue_reading = True
# Capture SIGINT
def end_read(signal,frame):
global continue_reading
print "Ctrl+C captured, ending read."
continue_reading = False
signal.signal(signal.SIGINT, end_read)
MIFAREReader = MFRC522()
while continue_reading:
(status,TagType) = MIFAREReader.MFRC522_Request(MIFAREReader.PICC_REQIDL)
if status == MIFAREReader.MI_OK:
print "Card detected"
(status,backData) = MIFAREReader.MFRC522_Anticoll()
if status == MIFAREReader.MI_OK:
print "Numero de la tarjeta: "+str(backData[0])+","+str(backData[1])+","+str(backData[2])+","+str(backData[3])+","+str(backData[4])