There is very little point sending data messages more often than 60
times a second, so we buffer them before sending.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package
### Test Plan
1. Smoke test (on a retro?)
- [x] End to end tests
---------
Co-authored-by: David Sheldrick <d.j.sheldrick@gmail.com>
This PR does a few things to help with performance:
1. Instead of doing changes on raf we now do them 60 times per second.
This limits the number of updates on high refresh rate screens like the
iPad. With the current code this only applied to the history updates (so
when you subscribed to the updates), but the next point takes this a bit
futher.
2. We now trigger react updates 60 times per second. This is a change in
`useValue` and `useStateTracking` hooks.
3. We now throttle the inputs (like the `pointerMove`) in state nodes.
This means we batch multiple inputs and only apply them at most 60 times
per second.
We had to adjust our own tests to pass after this change so I marked
this as major as it might require the users of the library to do the
same.
Few observations:
- The browser calls the raf callbacks when it can. If it gets
overwhelmed it will call them further and further apart. As things call
down it will start calling them more frequently again. You can clearly
see this in the drawing example. When fps gets to a certain level we
start to get fewer updates, then fps can recover a bit. This makes the
experience quite janky. The updates can be kinda ok one second (dropping
frames, but consistently) and then they can completely stop and you have
to let go of the mouse to make them happen again. With the new logic it
seems everything is a lot more consistent.
- We might look into variable refresh rates to prevent this overtaxing
of the browser. Like when we see that the times between our updates are
getting higher we could make the updates less frequent. If we then see
that they are happening more often we could ramp them back up. I had an
[experiment for this
here](4834863966 (diff-318e71563d7c47173f89ec084ca44417cf70fc72faac85b96f48b856a8aec466L30-L35)).
Few tests below. Used 6x slowdown for these.
# Resizing
### Before
https://github.com/tldraw/tldraw/assets/2523721/798a033f-5dfa-419e-9a2d-fd8908272ba0
### After
https://github.com/tldraw/tldraw/assets/2523721/45870a0c-c310-4be0-b63c-6c92c20ca037
# Drawing
Comparison is not 100% fair, we don't store the intermediate inputs
right now. That said, tick should still only produce once update so I do
think we can get a sense of the differences.
### Before
https://github.com/tldraw/tldraw/assets/2523721/2e8ac8c5-bbdf-484b-bb0c-70c967f4541c
### After
https://github.com/tldraw/tldraw/assets/2523721/8f54b7a8-9a0e-4a39-b168-482caceb0149
### Change Type
- [ ] `patch` — Bug fix
- [ ] `minor` — New feature
- [x] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Release Notes
- Improves the performance of rendering.
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
Rename `@tldraw/tldraw` to just `tldraw`! `@tldraw/tldraw` still exists
as an alias to `tldraw` for folks who are still using that.
### Test Plan
- [x] Unit Tests
- [ ] End to end tests
### Release Notes
- The `@tldraw/tldraw` package has been renamed to `tldraw`. You can
keep using the old version if you want though!
This PR bumps TypeScript to 5.3.3 and API extractor. We started getting
some weird behavior in CI due to different versions of the two
libraries, ie where the CI api.jsons would differ from those built
locally.
### Change Type
- [x] `dependencies` — Changes to package dependencies[^1]
Closes#2800
This PR makes it so that `check-scripts` will error out if you forget to
add a "references" entry to a tsconfig file when adding an internal
dependency in our monorepo.
If these project references are missed it can prevent TS from
building/rebuilding things when they need to be built/rebuilt.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
Currently, we type our fractional index keys as `string` and don't have
any validation for them. I'm touching some of this code for my work on
line handles and wanted to change that:
- fractional indexes are now `IndexKey`s, not `string`s. `IndexKey`s
have a brand property so can't be used interchangeably with strings
(like our IDs)
- There's a new `T.indexKey` validator which we can use in our
validations to make sure we don't end up with nonsense keys.
This PR is part of a series - please don't merge it until the things
before it have landed!
1. #2827 (you are here)
2. #2831
3. #2793
4. #2841
5. #2845
### Change Type
- [x] `patch` — Bug fix
### Test Plan
1. Mostly relying on unit & end to end tests here - no user facing
changes.
- [x] Unit Tests
As discussed offline, just making `yarn test` do what we expect it to.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
I went through the sync room code today while thinking about syncing. As
I worked through it, I added some comments etc for my own readability.
There is no change in how the code works.
There are a few functions declared in the body of `handlePushRequest`.
We might want to re-arrange things so that we're not re-declaring those
on each push (there are a LOT of pushes, basically every mouse move from
every client). I did try that but reverted that change; it feels like a
proper solution would be bigger than what I wanted to do here.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
@si14 you might know a better way to wire this up! lemme know if there's
something more clever here.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
### Release Notes
- Adds easier testing command for individual packages.
Occasionally the auto-built items, such as Sections.json, will be
flagged as having changes in a commit. This is because we generate that
file using spaces but our formatting uses tabs.
This PR changes all JSON.stringify({}, null, 2) to JSON.stringify({},
null, '\t'). Problem solved!
### Change Type
- [x] `patch` — Bug fix
Improves duplication. It will now remember the offset and shapes of your
`alt + drag` duplication and use that if you use the duplicate action
immediately after this.
Fixes https://github.com/tldraw/tldraw/issues/2264
### Change Type
- [ ] `patch` — Bug fix
- [x] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. Add a step-by-step description of how to test your PR here.
2.
- [ ] Unit Tests
- [ ] End to end tests
### Release Notes
- Add a brief release note for your PR here.
---------
Co-authored-by: Taha <98838967+Taha-Hassan-Git@users.noreply.github.com>
Co-authored-by: David Sheldrick <d.j.sheldrick@gmail.com>
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
This adds the ability to drag the label on an arrow to a different
location within the line segment/arc.
https://github.com/tldraw/tldraw/assets/469604/dbd2ee35-bebc-48d6-b8ee-fcf12ce91fa5
- A lot of the complexity lay in ensuring a fixed distance from the ends
of the arrowheads.
- I added a new type of handle `text-adjust` that makes the text box the
very handle itself.
- I added a `ARROW_HANDLES` enum - we should use more enums!
- The bulk of the changes are in ArrowShapeUtil — check that out in
particular obviously :)
Along the way, I tried to improve a couple spots as I touched them:
- added some more documentation to Vec.ts because some of the functions
in there were obscure/new to me. (at least the naming, hah)
- added `getPointOnCircle` which was being done in a couple places
independently and refactored those places.
### Questions
- the `getPointOnCircle` API changed. Is this considered breaking and/or
should I leave the signature the same? Wasn't sure if it was a big deal
or not.
- I made `labelPosition` in the schema always but I guess it could have
been optional? Lemme know if there's a preference.
- Any feedback on tests? Happy to expand those if necessary.
### Change Type
- [ ] `patch` — Bug fix
- [x] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. For arrow in [straightArrow, curvedArrow] test the following:
a. Label in the middle
b. Label at both ends of the arrow
c. Test arrows in different directions
d. Rotating the endpoints and seeing that the label stays at the end of
the arrow at a fixed width.
e. Test different stroke widths.
f. Test with different arrowheads.
2. Also, test arcs that are more circle like than arc-like.
- [x] Unit Tests
- [ ] End to end tests
### Release Notes
- Adds ability to change label position on arrows.
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
Co-authored-by: alex <alex@dytry.ch>
This PR moves the tldraw.com app into the public repo.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
---------
Co-authored-by: Dan Groshev <git@dgroshev.com>
Co-authored-by: alex <alex@dytry.ch>
Dan Groshev