Reverts the changes to the `state` package that were made in #2977.
Should fix the issue with shape jittering discovered during QA.
### Change Type
- [x] `patch` — Bug fix
- [ ] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. Create some shapes (draw shapes work well).
2. Open the same room in a second browser.
3. Resize shapes (using option / alt makes it more obvious).
4. The shapes should not jitter in any of the screens.
This PR does a few things to help with performance:
1. Instead of doing changes on raf we now do them 60 times per second.
This limits the number of updates on high refresh rate screens like the
iPad. With the current code this only applied to the history updates (so
when you subscribed to the updates), but the next point takes this a bit
futher.
2. We now trigger react updates 60 times per second. This is a change in
`useValue` and `useStateTracking` hooks.
3. We now throttle the inputs (like the `pointerMove`) in state nodes.
This means we batch multiple inputs and only apply them at most 60 times
per second.
We had to adjust our own tests to pass after this change so I marked
this as major as it might require the users of the library to do the
same.
Few observations:
- The browser calls the raf callbacks when it can. If it gets
overwhelmed it will call them further and further apart. As things call
down it will start calling them more frequently again. You can clearly
see this in the drawing example. When fps gets to a certain level we
start to get fewer updates, then fps can recover a bit. This makes the
experience quite janky. The updates can be kinda ok one second (dropping
frames, but consistently) and then they can completely stop and you have
to let go of the mouse to make them happen again. With the new logic it
seems everything is a lot more consistent.
- We might look into variable refresh rates to prevent this overtaxing
of the browser. Like when we see that the times between our updates are
getting higher we could make the updates less frequent. If we then see
that they are happening more often we could ramp them back up. I had an
[experiment for this
here](4834863966 (diff-318e71563d7c47173f89ec084ca44417cf70fc72faac85b96f48b856a8aec466L30-L35)).
Few tests below. Used 6x slowdown for these.
# Resizing
### Before
https://github.com/tldraw/tldraw/assets/2523721/798a033f-5dfa-419e-9a2d-fd8908272ba0
### After
https://github.com/tldraw/tldraw/assets/2523721/45870a0c-c310-4be0-b63c-6c92c20ca037
# Drawing
Comparison is not 100% fair, we don't store the intermediate inputs
right now. That said, tick should still only produce once update so I do
think we can get a sense of the differences.
### Before
https://github.com/tldraw/tldraw/assets/2523721/2e8ac8c5-bbdf-484b-bb0c-70c967f4541c
### After
https://github.com/tldraw/tldraw/assets/2523721/8f54b7a8-9a0e-4a39-b168-482caceb0149
### Change Type
- [ ] `patch` — Bug fix
- [ ] `minor` — New feature
- [x] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Release Notes
- Improves the performance of rendering.
---------
Co-authored-by: Steve Ruiz <steveruizok@gmail.com>
Describe what your pull request does. If appropriate, add GIFs or images
showing the before and after.
### Change Type
- [ ] `patch` — Bug fix
- [ ] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [x] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. Add a step-by-step description of how to test your PR here.
2.
- [ ] Unit Tests
- [ ] End to end tests
### Release Notes
- Fix typo in useValue comment.
This PR bumps TypeScript to 5.3.3 and API extractor. We started getting
some weird behavior in CI due to different versions of the two
libraries, ie where the CI api.jsons would differ from those built
locally.
### Change Type
- [x] `dependencies` — Changes to package dependencies[^1]
Closes#2800
This PR makes it so that `check-scripts` will error out if you forget to
add a "references" entry to a tsconfig file when adding an internal
dependency in our monorepo.
If these project references are missed it can prevent TS from
building/rebuilding things when they need to be built/rebuilt.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
As discussed offline, just making `yarn test` do what we expect it to.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
This PR revamps how errors in signia are handled.
This was brought about by a situation that @MitjaBezensek encountered
where he added a reactor to a shape util class. During fuzz tests, that
reactor was being executed at times when the Editor was not in a usable
state (we had a minor hole in our sync rebase logic that allowed this,
fixed elsewhere) and the reactor was throwing errors because it
dereferenced a parent signal that relied on the page state
(getShapesInCurrentPage or whatever) when there were no page records in
the store.
The strange part was that even if we wrapped the body of the reactor
function in a try/catch, ignoring the error, we'd still see the error
bubble up somehow.
That was because the error was being thrown in a Computed derive
function, and those are evaluated independently (i.e. outside of the
reactor function) by signia as it traverses the dependency graph from
leaves to roots in the `haveParentsChanged()` internal function.
So the immediate fix was to make it so that `haveParentsChanged` ignores
errors somehow.
But the better fix involved completely revamping how signia handles
errors, and they work very much like how signia handles values now. i.e.
- signia still assumes that deriver functions are pure, and that if a
deriver function throws once it will throw again unless its parent
signals change value, so **it caches thrown errors for computed values**
and throws them again if .get() is called again before the parents
change
- it clears the history buffer if an error is thrown
- it does not allow errors to bubble during dirty checking i.e. inside
`haveParentsChanged` or while calculating diffs.
### Change Type
- [x] `patch` — Bug fix
- [ ] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [ ] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Test Plan
1. Add a step-by-step description of how to test your PR here.
2.
- [x] Unit Tests
- [ ] End to end tests
### Release Notes
- Add a brief release note for your PR here.
Biome as it is now didn't work out for us 😢
Summary for posterity:
* it IS much, much faster, fast enough to skip any sort of caching
* we couldn't fully replace Prettier just yet. We use Prettier
programmatically to format code in docs, and Biome's JS interface is
officially alpha and [had legacy peer deps
set](https://github.com/biomejs/biome/pull/1756) (which would fail our
CI build as we don't allow installation warnings)
* ternary formatting differs from Prettier, leading to a large diff
https://github.com/biomejs/biome/issues/1661
* import sorting differs from Prettier's
`prettier-plugin-organize-imports`, making the diff even bigger
* the deal breaker is a multi-second delay on saving large files (for us
it's
[Editor.ts](https://github.com/tldraw/tldraw/blob/main/packages/editor/src/lib/editor/Editor.ts))
in VSCode when import sorting is enabled. There is a seemingly relevant
Biome issue where I posted a small summary of our findings:
https://github.com/biomejs/biome/issues/1569#issuecomment-1930411623
Further actions:
* reevaluate in a few months as Biome matures
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package
Biome seems to be MUCH faster than Prettier. Unfortunately, it
introduces some formatting changes around the ternary operator, so we
have to update files in the repo. To make revert easier if we need it,
the change is split into two PRs. This PR introduces a Biome CI check
and reformats all files accordingly.
## Change Type
- [x] `minor` — New feature
@si14 you might know a better way to wire this up! lemme know if there's
something more clever here.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
### Release Notes
- Adds easier testing command for individual packages.
This PR moves the tldraw.com app into the public repo.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
---------
Co-authored-by: Dan Groshev <git@dgroshev.com>
Co-authored-by: alex <alex@dytry.ch>
This PR adds the docs app back into the tldraw monorepo.
## Deploying
We'll want to update our deploy script to update the SOURCE_SHA to the
newest release sha... and then deploy the docs pulling api.json files
from that release. We _could_ update the docs on every push to main, but
we don't have to unless something has changed. Right now there's no
automated deployments from this repo.
## Side effects
To make this one work, I needed to update the lock file. This might be
ok (new year new lock file), and everything builds as expected, though
we may want to spend some time with our scripts to be sure that things
are all good.
I also updated our prettier installation, which decided to add trailing
commas to every generic type. Which is, I suppose, [correct
behavior](https://github.com/prettier/prettier-vscode/issues/955)? But
that caused diffs in every file, which is unfortunate.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
This PR updates the licenses across tldraw to a bespoke tldraw license.
The idea here is leverage dual licensing for revenue from companies
using tldraw. The source code and its distributions are provided under a
non-commercial license (tldraw) while we offer to sell / give out an
alternative exclusive-use license for companies who wish to use the
product for commercial purposes.
- [x] Add new license
- [x] Change licenses in package.jsons
- [x] Update READMEs
- [x] Update docs (separate repo PR)
- [x] Have alternative license in hand (US)
- [ ] Have alternative license in hand (UK)
- [x] Have sales contract in hand (US)
- [ ] Have sales contract in hand (UK)
### Change Type
- [x] `major` — Breaking change
Finally removing all these deprecated getters ahead of the full release.
### Change Type
- [x] `major` — Breaking change
### Release Notes
- (Breaking) Removed deprecated getters.
This PR opts to split the big singleton out into other smaller
singletons so that we can revert the moving of the tsdoc comments that
happened in #2322
### Change Type
- [x] `patch` — Bug fix
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
One minor issue with signia is that it uses global state for
bookkeeping, so it is potentially disastrous if there is more than one
version of it included in a bundle.
To prevent that being an issue before we had a warning that would
trigger if signia detects multiple initializations.
> Multiple versions of @tldraw/state detected. This will cause
unexpected behavior. Please add "resolutions" (yarn/pnpm) or "overrides"
(npm) in your package.json to ensure only one version of @tldraw/state
is loaded.
Alas I think this warning triggers too often in development
environments, e.g. during HMR or janky bundlers.
Something that can prevent the need for this particular warning is
having a global singleton version of signia that we only instantiate
once, and then re-use that one on subsequent module initializations. We
didn't do this before because it has a few downsides:
- breaks HMR if you are working on signia itself, since updated modules
won't be used and you'll need to do a full refresh.
- introduces the possibility of breakage if we remove or even add APIs
to signia. We can't rely on having the latest version of signia be the
first to instantiate, and we can't allow later instantiations to take
precedence since atoms n stuff may have already been created with the
prior version. To mitigate this I've introduced a `apiVersion` const
that we can increment when we make any kind of additions or removals. If
there is a mismatch between the `apiVersion` in the global singleton vs
the currently-initializing module, then it throws.
Ultimately i think the pros outweigh the cons here, i.e. far fewer
people will see and have to deal with the error message shown above, and
fewer people should encounter a situation where the editor appears to
load but nothing changes when you interact with it.
### Change Type
- [x] `patch` — Bug fix
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
### Release Notes
- Make a global singleton for tlstate.
Follow up to #2189
### Change Type
- [ ] `patch` — Bug fix
- [ ] `minor` — New feature
- [ ] `major` — Breaking change
- [ ] `dependencies` — Changes to package dependencies[^1]
- [x] `documentation` — Changes to the documentation only[^2]
- [ ] `tests` — Changes to any test code only[^2]
- [ ] `internal` — Any other changes that don't affect the published
package[^2]
- [ ] I don't know
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
follow up to #2189
adds runtime warnings for deprecated fields. cleans up remaining fields
and usages. Adds a lint rule to prevent access to deprecated fields.
Adds a lint rule to prevent using getters.
### Change Type
- [x] `patch` — Bug fix
This PR replaces the `.value` getter for the atom with `.get()`
### Change Type
- [x] `major` — Breaking change
---------
Co-authored-by: David Sheldrick <d.j.sheldrick@gmail.com>
This switches us from the 'alpha' to 'beta' prerelease tag. After we
make our first deploy folks will be able to install the latest version
by doing `npm install @tldraw/tldraw@beta`.
### Change Type
- [x] `internal` — Any other changes that don't affect the published
package[^2]
[^1]: publishes a `patch` release, for devDependencies use `internal`
[^2]: will not publish a new version
This PR removes all mentions of "(optional)" from our jsdocs. This is
for:
* consistency — many of our jsdocs don't mention "(optional)" for
optional parameters. The developer is expected to use the type
definition to find this out. But it's a bit unclear because we use
"(optional)" in many places too.
* docs site — on our docs site, we use type definitions to figure out
what is optional, and what isn't. We use that info to denote optional
parameters. It looks funny having two "(optional)"s on a page. We
*could* strip them, but it's probably better to just remove them at the
source.
<img width="526" alt="image"
src="https://github.com/tldraw/tldraw/assets/15892272/b5b65a2b-2923-42a9-a2d3-9b1d9d55cd3d">
### Change Type
- [x] `documentation` — Changes to the documentation only[^2]
### Release Notes
- dev: Removed duplicate/inconsistent `(optional)`s from docs
This PR includes further UX improvements to selection.
- clicking inside of a hollow shape will no longer select it on pointer
up
- clicking a shape's filled label will select it on pointer down
- clicking a shape's empty label will select it on pointer up
- clicking and dragging a selected arrow is now better limited to its
body, not its bounds
- arrows will no longer bind to labels
### Text labels
A big change here relates to text labels. Previously, we had listeners
set on the text label elements; I've removed these and we now check the
actual label bounds geometry for a hit. For geo shapes, this geometry is
now placed correctly based on the alignment / vertical alignment of the
label.
- Clicking on a label with text in it will select the shape on pointer
down.
- Clicking on an empty text label will select the shape on pointer up.
## Hollow shapes
Previously, shapes with `fill: none` were also being selected on pointer
up. I've removed that logic because it was producing wrong-feeling
selections too often. We now select these shapes only when clicking on
the label (as mentioned above) or when clicking on the edges of the
shape. This is in line with the original behavior (currently on
tldraw.com, prior to the earlier PR that updated selection logic).
## Arrows
Arrows still hit the inside of hollow shapes, using the "smallest
hovered" logic previously used for pointer-up selection on hollow
shapes. They also now correctly do so while ignoring text labels.
### Change Type
- [x] `minor` — New feature
### Test Plan
1. try selecting geo shapes, nested geo shapes, arrows and shapes with
labels or without labels
- [x] Unit Tests
Reverts tldraw/tldraw#1778.
Fuzz testing picked up errors related to deleting pages and undo/redo
which may doom this PR.
### Change Type
- [x] `major` — Breaking change
This PR shrinks the commands API surface and adds a manager
(`CleanupManager`) for side effects.
### Change Type
- [x] `major` — Breaking change
### Test Plan
Use the app! Especially undo and redo. Our tests are passing but I've
found more cases where our coverage fails to catch issues.
### Release Notes
- tbd
This PR moves code between our packages so that:
- @tldraw/editor is a “core” library with the engine and canvas but no
shapes, tools, or other things
- @tldraw/tldraw contains everything particular to the experience we’ve
built for tldraw
At first look, this might seem like a step away from customization and
configuration, however I believe it greatly increases the configuration
potential of the @tldraw/editor while also providing a more accurate
reflection of what configuration options actually exist for
@tldraw/tldraw.
## Library changes
@tldraw/editor re-exports its dependencies and @tldraw/tldraw re-exports
@tldraw/editor.
- users of @tldraw/editor WITHOUT @tldraw/tldraw should almost always
only import things from @tldraw/editor.
- users of @tldraw/tldraw should almost always only import things from
@tldraw/tldraw.
- @tldraw/polyfills is merged into @tldraw/editor
- @tldraw/indices is merged into @tldraw/editor
- @tldraw/primitives is merged mostly into @tldraw/editor, partially
into @tldraw/tldraw
- @tldraw/file-format is merged into @tldraw/tldraw
- @tldraw/ui is merged into @tldraw/tldraw
Many (many) utils and other code is moved from the editor to tldraw. For
example, embeds now are entirely an feature of @tldraw/tldraw. The only
big chunk of code left in core is related to arrow handling.
## API Changes
The editor can now be used without tldraw's assets. We load them in
@tldraw/tldraw instead, so feel free to use whatever fonts or images or
whatever that you like with the editor.
All tools and shapes (except for the `Group` shape) are moved to
@tldraw/tldraw. This includes the `select` tool.
You should use the editor with at least one tool, however, so you now
also need to send in an `initialState` prop to the Editor /
<TldrawEditor> component indicating which state the editor should begin
in.
The `components` prop now also accepts `SelectionForeground`.
The complex selection component that we use for tldraw is moved to
@tldraw/tldraw. The default component is quite basic but can easily be
replaced via the `components` prop. We pass down our tldraw-flavored
SelectionFg via `components`.
Likewise with the `Scribble` component: the `DefaultScribble` no longer
uses our freehand tech and is a simple path instead. We pass down the
tldraw-flavored scribble via `components`.
The `ExternalContentManager` (`Editor.externalContentManager`) is
removed and replaced with a mapping of types to handlers.
- Register new content handlers with
`Editor.registerExternalContentHandler`.
- Register new asset creation handlers (for files and URLs) with
`Editor.registerExternalAssetHandler`
### Change Type
- [x] `major` — Breaking change
### Test Plan
- [x] Unit Tests
- [x] End to end tests
### Release Notes
- [@tldraw/editor] lots, wip
- [@tldraw/ui] gone, merged to tldraw/tldraw
- [@tldraw/polyfills] gone, merged to tldraw/editor
- [@tldraw/primitives] gone, merged to tldraw/editor / tldraw/tldraw
- [@tldraw/indices] gone, merged to tldraw/editor
- [@tldraw/file-format] gone, merged to tldraw/tldraw
---------
Co-authored-by: alex <alex@dytry.ch>
We saw an issue on stackblitz where the `global` constant was causing a
conflict (possibly because that environment was injecting its own
`global`). Either way, perhaps `global` is a bit of a risky name—this PR
renames `global` to `tldrawStateGlobal`.
### Change Type
- [x] `patch`
It tried to get out but we're dragging it back in.
This PR brings [signia](https://github.com/tldraw/signia) back into
tldraw as @tldraw/state.
### Change Type
- [x] major
---------
Co-authored-by: David Sheldrick <d.j.sheldrick@gmail.com>
