INAGAKI Hiroshi ff4bc483fc ath79: add support for I-O DATA WN-AC1167DGR ... I-O DATA WN-AC1167DGR is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9557. Specification: - Qualcomm Atheros QCA9557 - 128 MB of RAM (DDR2) - 16 MB of Flash (SPI) - 2T2R 2.4/5 GHz wifi - 2.4 GHz: SoC internal - 5 GHz: QCA988x - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 6x keys (4x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WN-AC1167DGR 2. Connect power cable to WN-AC1167DGR and turn on it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2018-08-16 21:20:57 +02:00
..
imagebuilder	imagebuilder: manifest function show stderr	2018-08-06 06:54:42 +02:00
linux	ath79: add support for I-O DATA WN-AC1167DGR	2018-08-16 21:20:57 +02:00
sdk	sdk: include arch/arm/ Linux includes along with arch/arm64/ ones	2018-08-03 13:47:29 +02:00
toolchain	merge: etc: update remaining files	2017-12-08 19:41:18 +01:00
Config.in	config: set ARCH if powerpc64 is selected in the configuration	2017-10-24 13:24:04 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00