openwrtv4/target/linux/ar71xx/image
Catrinel Catrinescu 4ba2dd130a ar71xx: add ew-balin platform from Embedded Wireless
Add the Embedded Wireless "Balin" platform
 SoC: QCA AR9344 or AR9350
 RAM: DDR2-RAM 64MBytes
 Flash: SPI-NOR 16MBytes
 WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n
 Ethernet: 3 x 10/100 Mb/s
 USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up
 PCI-Express: 1 x lane PCIe 1.2
 UART: 1 x Normal, 1 x High-Speed
 JTAG: 1 x EJTAG
 GPIO: 10 x Input/Output multiplexed

The module comes already with the current vanilla OpenWrt firmware.
To update, use "sysupgrade" image directly in vendor firmware.

Signed-off-by: Catrinel Catrinescu <cc@80211.de>
2018-01-25 16:50:08 +01:00
..
lzma-loader ar71xx: fix lzma-loader build with glibc 2017-12-13 11:34:51 +01:00
common-tp-link.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
generic-legacy-devices.mk ar71xx: image: move Sitecom WLR-8100 from legacy to generic 2018-01-15 00:12:13 +01:00
generic-senao.mk ar71xx: image: rework EnGenius ENS202EXT factory image 2018-01-15 13:39:54 +01:00
generic-tp-link.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
generic-ubnt.mk ar71xx/generic: add generic- prefix to vendor-specific image Makefile snippets 2018-01-13 19:54:45 +01:00
generic.mk ar71xx: add ew-balin platform from Embedded Wireless 2018-01-25 16:50:08 +01:00
legacy.mk ar71xx: image: move Sitecom WLR-8100 from legacy to generic 2018-01-15 00:12:13 +01:00
Makefile ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
mikrotik.mk ar71xx: fix MikroTik rb-nor-flash-16M-ac image 2018-01-24 01:24:39 +01:00
nand.mk ar71xx: add support for Nokia WI2A-AC200i 2017-10-19 12:27:42 +02:00
tiny-legacy-devices.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
tiny-tp-link.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 2014-06-24 18:14:18 +00:00