openwrtv4/target/linux/ramips/base-files/etc/uci-defaults/02_network
John Crispin fc9532aeaa ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

SVN-Revision: 36898
2013-06-10 08:24:56 +00:00

292 lines
5.7 KiB
Bash
Executable file

#!/bin/sh
. /lib/functions.sh
. /lib/ramips.sh
. /lib/functions/uci-defaults.sh
ramips_setup_rt3x5x_vlans()
{
if [ ! -x /sbin/swconfig ]; then
# legacy default
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
return
fi
local wanports=""
local lanports=""
swconfig dev rt305x set reset 1
for port in 5 4 3 2 1 0; do
if [ `swconfig dev rt305x port $port get disable` = "1" ]; then
continue
fi
if [ `swconfig dev rt305x port $port get lan` = "0" ]; then
wanports="$port $wanports"
else
lanports="$port $lanports"
fi
done
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rt305x" "1" "1"
ucidef_add_switch_vlan "rt305x" "1" "$lanports 6t"
ucidef_add_switch_vlan "rt305x" "2" "$wanports 6t"
}
ramips_setup_interfaces()
{
local board="$1"
ucidef_set_interface_loopback
case $board in
3g300m | \
w150m | \
all0256n | \
all5002 | \
all5003 | \
broadway | \
wnce2001)
ucidef_add_switch "switch0" "1" "0"
ucidef_set_interface_lan "eth0"
;;
3g-6200nl | \
wl-330n)
ucidef_set_interface_lan "eth0.1"
;;
3g-6200n | \
argus-atp52b | \
b2c | \
nw718 | \
psr-680w | \
sl-r7205 | \
w502u | \
wr6202)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
asl26555)
ucidef_set_interface_lan "eth0.1"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
;;
dir-645)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
ucidef_add_switch_vlan "switch0" "2" "0 6t"
;;
dir-615-h1 | \
mzk-w300nh2)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
ucidef_add_switch_vlan "switch0" "2" "4 6t"
;;
f5d8235-v1 | \
f5d8235-v2 | \
ur-326n4g)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
ucidef_add_switch_vlan "switch0" "2" "0 6t"
;;
ur-336un)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
;;
br6524n | \
v11st-fe)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
ucidef_add_switch_vlan "switch0" "2" "0 5t"
;;
rt-n15 | \
wl-351)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
ucidef_add_switch_vlan "switch0" "2" "4 5t"
;;
rt-n56u)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
ucidef_add_switch_vlan "switch0" "2" "4 8t"
;;
tew-691gr|\
tew-692gr)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0t 1 2 3 4"
ucidef_add_switch_vlan "switch0" "2" "0t 5"
;;
wcr-150gn)
ucidef_set_interfaces_lan_wan "eth0.2" "eth0.1"
;;
d105 | \
omni-emb-hpm|\
wli-tx4-ag300n)
ucidef_set_interface_lan "eth0"
;;
*)
RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
if [ -n "${RT3X5X}" ]; then
ramips_setup_rt3x5x_vlans
else
ucidef_set_interfaces_lan_wan "eth0" "eth1"
fi
;;
esac
}
ramips_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
all0256n | \
all5002 | \
dir-615-h1)
lan_mac=$(mtd_get_mac_binary factory 40)
;;
3g-6200n | \
3g300m | \
w150m | \
air3gii | \
argus-atp52b | \
bc2 | \
br6425 | \
broadway | \
dir-620-d1 | \
f5d8235-v1 | \
mpr-a2 | \
mzk-w300nh2 | \
nw718 | \
psr-680w | \
rt-n15 | \
sl-r7205 | \
wl-351)
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
asl26555)
lan_mac=$(mtd_get_mac_binary devdata 16388)
;;
w306r-v20)
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(macaddr_add "$lan_mac" 5)
;;
rt-n13u | \
fonera20n)
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
dir-300-b1 |\
dir-300-b2 |\
dir-600-b1)
lan_mac=$(mtd_get_mac_binary devdata 16388)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
dir-620-a1)
lan_mac=$(mtd_get_mac_binary factory 4)
lan_mac=$(macaddr_setbit_la "$lan_mac")
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
dir-645)
lan_mac=$(mtd_get_mac_ascii nvram lanmac)
wan_mac=$(mtd_get_mac_ascii nvram wanmac)
;;
esr-9753 | \
ur-326n4g | \
ur-336un)
lan_mac=$(mtd_get_mac_binary devdata 16388)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
nbg-419n | \
wcr-150gn)
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(mtd_get_mac_binary factory 40)
;;
omni-emb-hpm)
lan_mac=$(mtd_get_mac_binary factory 40)
;;
f5d8235-v2)
lan_mac=$(mtd_get_mac_binary "u-boot" 262148)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
rt-n56u)
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(mtd_get_mac_binary factory 32772)
;;
tew-691gr)
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(macaddr_add "$lan_mac" 3)
;;
tew-692gr)
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(macaddr_add "$lan_mac" 4)
;;
all0239-3g | \
carambola | \
freestation5 | \
w502u | \
wnce2001)
lan_mac=$(mtd_get_mac_binary factory 40)
wan_mac=$(mtd_get_mac_binary factory 46)
;;
wl341v3)
lan_mac=$(mtd_get_mac_binary board-nvram 65440)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
d105 | \
wli-tx4-ag300n)
lan_mac=$(mtd_get_mac_binary factory 4)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
}
[ -e /etc/config/network ] && exit 0
touch /etc/config/network
board=$(ramips_board_name)
ramips_setup_interfaces $board
ramips_setup_macs $board
uci commit network
exit 0