openwrtv4/target/linux/ar71xx/base-files/etc/diag.sh
Gabor Juhos faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
2012-01-31 18:37:09 +00:00

172 lines
2.9 KiB
Bash
Executable file

#!/bin/sh
#
# Copyright (C) 2009 OpenWrt.org
#
#
. /lib/ar71xx.sh
status_led=""
led_set_attr() {
[ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
}
status_led_set_timer() {
led_set_attr $status_led "trigger" "timer"
led_set_attr $status_led "delay_on" "$1"
led_set_attr $status_led "delay_off" "$2"
}
status_led_on() {
led_set_attr $status_led "trigger" "none"
led_set_attr $status_led "brightness" 255
}
status_led_off() {
led_set_attr $status_led "trigger" "none"
led_set_attr $status_led "brightness" 0
}
get_status_led() {
case $(ar71xx_board_name) in
alfa-nx)
status_led="alfa:green:led_8"
;;
ap81)
status_led="ap81:green:status"
;;
ap83)
status_led="ap83:green:power"
;;
ap96)
status_led="ap96:green:led2"
;;
aw-nr580)
status_led="aw-nr580:green:ready"
;;
bullet-m | rocket-m | nano-m | nanostation-m)
status_led="ubnt:green:link4"
;;
db120)
status_led="db120:green:status"
;;
dir-600-a1)
status_led="dir-600-a1:green:power"
;;
dir-615-c1)
status_led="dir-615c1:green:status"
;;
dir-615-e4)
status_led="dir-615-e4:green:power"
;;
dir-825-b1)
status_led="dir825b1:orange:power"
;;
eap7660d)
status_led="eap7660d:green:ds4"
;;
hornet-ub)
status_led="alfa:blue:wps"
;;
ja76pf)
status_led="ja76pf:green:led1"
;;
ls-sr71)
status_led="ubnt:green:d22"
;;
mzk-w04nu | \
mzk-w300nh)
status_led="planex:green:status"
;;
nbg460n_550n_550nh)
status_led="nbg460n:green:power"
;;
om2p)
status_led="om2p:blue:power"
;;
pb44)
status_led="pb44:amber:jump1"
;;
rb-411 | rb-411u | rb-433 | rb-433u | rb-450 | rb-450g | rb-493)
status_led="rb4xx:yellow:user"
;;
routerstation | routerstation-pro)
status_led="ubnt:green:rf"
;;
rw2458n)
status_led="rw2458n:green:d3"
;;
tew-632brp)
status_led="tew-632brp:green:status"
;;
tl-mr3020)
status_led="tp-link:green:wps"
;;
tl-mr3220 | \
tl-mr3420 | \
tl-wa901nd | \
tl-wa901nd-v2 | \
tl-wr1043nd | \
tl-wr741nd | \
tl-wr741nd-v4 | \
tl-wr841n-v1 | \
tl-wr841n-v7 | \
tl-wr941nd)
status_led="tp-link:green:system"
;;
tl-wr703n)
status_led="tp-link:blue:system"
;;
tl-wr2543n)
status_led="tp-link:green:wps"
;;
unifi)
status_led="ubnt:green:dome"
;;
whr-g301n | \
whr-hp-g300n | \
whr-hp-gn | \
wzr-hp-g300nh)
status_led="buffalo:green:router"
;;
wzr-hp-g300nh2)
status_led="buffalo:red:diag"
;;
wndr3700)
status_led="wndr3700:green:power"
;;
wnr2000)
status_led="wnr2000:green:power"
;;
wp543)
status_led="wp543:green:diag"
;;
wrt400n)
status_led="wrt400n:blue:wps"
;;
wrt160nl)
status_led="wrt160nl:blue:wps"
;;
zcn-1523h-2 | zcn-1523h-5)
status_led="zcn-1523h:amber:init"
;;
esac;
}
set_state() {
get_status_led
case "$1" in
preinit)
insmod leds-gpio
status_led_set_timer 200 200
;;
failsafe)
status_led_set_timer 50 50
;;
done)
status_led_on
;;
esac
}