openwrtv4/target/linux/imx6/base-files/lib/imx6.sh
Luka Perkov fa8e8d262e imx6: kernel: add GW5520 support
The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42148
2014-08-11 20:35:13 +00:00

68 lines
1.3 KiB
Bash
Executable file

#!/bin/sh
#
# Copyright (C) 2010-2013 OpenWrt.org
#
IMX6_BOARD_NAME=
IMX6_MODEL=
imx6_board_detect() {
local machine
local name
machine=$(cat /proc/device-tree/model)
case "$machine" in
"Gateworks Ventana i.MX6 DualLite/Solo GW51XX" |\
"Gateworks Ventana i.MX6 Dual/Quad GW51XX")
name="gw51xx"
;;
"Gateworks Ventana i.MX6 DualLite/Solo GW52XX" |\
"Gateworks Ventana i.MX6 Dual/Quad GW52XX")
name="gw52xx"
;;
"Gateworks Ventana i.MX6 DualLite/Solo GW53XX" |\
"Gateworks Ventana i.MX6 Dual/Quad GW53XX")
name="gw53xx"
;;
"Gateworks Ventana i.MX6 DualLite/Solo GW54XX" |\
"Gateworks Ventana i.MX6 Dual/Quad GW54XX" |\
"Gateworks Ventana GW5400-A")
name="gw54xx"
;;
"Gateworks Ventana i.MX6 DualLite/Solo GW552X" |\
"Gateworks Ventana i.MX6 Dual/Quad GW552X")
name="gw552x"
;;
"Wandboard i.MX6 Dual Lite Board")
name="wandboard"
;;
*)
name="generic"
;;
esac
[ -z "$IMX6_BOARD_NAME" ] && IMX6_BOARD_NAME="$name"
[ -z "$IMX6_MODEL" ] && IMX6_MODEL="$machine"
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
echo "$IMX6_BOARD_NAME" > /tmp/sysinfo/board_name
echo "$IMX6_MODEL" > /tmp/sysinfo/model
}
imx6_board_name() {
local name
[ -f /tmp/sysinfo/board_name ] || imx6_board_detect
[ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name)
[ -z "$name" ] && name="unknown"
echo "$name"
}