fa137d51f5
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83
The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.
Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47451
2436 lines
91 KiB
Makefile
2436 lines
91 KiB
Makefile
#
|
|
# Copyright (C) 2008-2011 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
JFFS2_BLOCKSIZE = 64k 128k 256k
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
IMAGE_PROFILE:=$(if $(PROFILE),$(PROFILE),Default)
|
|
|
|
KERNEL_LOADADDR = 0x80060000
|
|
|
|
DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS
|
|
|
|
define Build/netgear-squashfs
|
|
rm -rf $@.fs $@.squashfs
|
|
mkdir -p $@.fs/image
|
|
cp $@ $@.fs/image/uImage
|
|
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
|
|
$@.fs $@.squashfs \
|
|
-noappend -root-owned -be -b 65536
|
|
dd if=/dev/zero bs=1k count=1 >> $@.squashfs
|
|
mkimage \
|
|
-A mips -O linux -T filesystem -C none \
|
|
-M $(NETGEAR_KERNEL_MAGIC) \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $@.squashfs $@
|
|
rm -rf $@.squashfs $@.fs
|
|
endef
|
|
|
|
define Build/netgear-uImage
|
|
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
|
|
endef
|
|
|
|
# combine kernel and rootfs into one image
|
|
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
|
|
# <type> is "sysupgrade" or "factory"
|
|
#
|
|
# -a align the rootfs start on an <align> bytes boundary
|
|
# -j add jffs2 end-of-filesystem markers
|
|
# -s strip padding from end of the image
|
|
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
|
|
define Build/mktplinkfw
|
|
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $2 \
|
|
-m $(TPLINK_HEADER_VERSION) \
|
|
-k $(word 1,$^) \
|
|
-r $@ \
|
|
-o $@.new \
|
|
-j -X 0x40000 \
|
|
-a $(call rootfs_align,$(FILESYSTEM)) \
|
|
$(if $(findstring sysupgrade,$1),-s) && mv $@.new $@ || rm -f $@
|
|
endef
|
|
|
|
# mktplinkfw-initramfs <optional extra arguments to mktplinkfw binary>
|
|
#
|
|
# -c combined image
|
|
define Build/mktplinkfw-initramfs
|
|
$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $2 \
|
|
-m $(TPLINK_HEADER_VERSION) \
|
|
-k $@ \
|
|
-o $@.new \
|
|
-s -S \
|
|
-c
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/loader-common
|
|
rm -rf $@.src
|
|
$(MAKE) -C lzma-loader \
|
|
PKG_BUILD_DIR="$@.src" \
|
|
TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
|
|
KERNEL_CMDLINE="$(CMDLINE)" BOARD="$(BOARDNAME)" \
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
$(1) compile loader.gz
|
|
mv "$@.gz" "$@"
|
|
rm -rf $@.src
|
|
endef
|
|
|
|
define Build/loader-okli-compile
|
|
$(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0)
|
|
endef
|
|
|
|
define Build/loader-kernel
|
|
$(call Build/loader-common,LOADER_DATA="$@")
|
|
endef
|
|
|
|
define Build/loader-okli
|
|
dd if=$(KDIR)/loader-$(1).gz bs=7680 conv=sync of="$@.new"
|
|
cat "$@" >> "$@.new"
|
|
mv "$@.new" "$@"
|
|
endef
|
|
|
|
define Build/copy-file
|
|
cat "$(1)" > "$@"
|
|
endef
|
|
|
|
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
|
|
# mkubntimage is using the kernel image direct
|
|
# routerboard creates partitions out of the ubnt header
|
|
define Build/mkubntimage
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
|
|
-k $(word 1,$^) \
|
|
-r $@ \
|
|
-o $@
|
|
endef
|
|
|
|
# all UBNT XM device expect the kernel image to have 1024k while flash, when
|
|
# booting the image, the size doesn't matter.
|
|
define Build/mkubntimage-split
|
|
dd if=$@ of=$@.old1 bs=1024k count=1
|
|
dd if=$@ of=$@.old2 bs=1024k skip=1
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage \
|
|
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
|
|
-k $@.old1 \
|
|
-r $@.old2 \
|
|
-o $@
|
|
rm $@.old1 $@.old2
|
|
endef
|
|
|
|
define Build/mkubntimage2
|
|
$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
|
|
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
|
|
-p jffs2:0x50000:0xf60000:0:0:$@ \
|
|
-o $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
|
|
|
|
define Device/Default
|
|
BOARDNAME :=
|
|
DEVICE_PROFILE = $$(BOARDNAME)
|
|
PROFILES = Default Minimal $$(DEVICE_PROFILE)
|
|
MTDPARTS :=
|
|
IMAGES := sysupgrade.bin
|
|
BLOCKSIZE := 64k
|
|
FILESYSTEMS = $(filter-out jffs2-%,$(TARGET_FILESYSTEMS)) jffs2-$$(BLOCKSIZE)
|
|
CONSOLE = ttyS0,115200
|
|
CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
|
|
COMPILE :=
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/bsb
|
|
BOARDNAME = BSB
|
|
IMAGE_SIZE = 16000k
|
|
CONSOLE = ttyATH0,115200
|
|
MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += bsb
|
|
|
|
define Device/carambola2
|
|
BOARDNAME = CARAMBOLA2
|
|
IMAGE_SIZE = 16000k
|
|
CONSOLE = ttyATH0,115200
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += carambola2
|
|
|
|
define Device/cf-e316n-v2
|
|
BOARDNAME = CF-E316N-V2
|
|
IMAGE_SIZE = 16192k
|
|
CONSOLE = ttyS0,115200
|
|
MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro
|
|
endef
|
|
TARGET_DEVICES += cf-e316n-v2
|
|
|
|
define Device/weio
|
|
BOARDNAME = WEIO
|
|
IMAGE_SIZE = 16000k
|
|
CONSOLE = ttyATH0,115200
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
|
|
endef
|
|
TARGET_DEVICES += weio
|
|
|
|
define Device/wndr3700
|
|
BOARDNAME = WNDR3700
|
|
NETGEAR_KERNEL_MAGIC = 0x33373030
|
|
NETGEAR_BOARD_ID = WNDR3700
|
|
IMAGE_SIZE = 7680k
|
|
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
|
|
IMAGES := sysupgrade.bin factory.img factory-NA.img
|
|
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
|
|
IMAGE/default = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/wndr3700v2
|
|
$(Device/wndr3700)
|
|
NETGEAR_BOARD_ID = WNDR3700v2
|
|
NETGEAR_KERNEL_MAGIC = 0x33373031
|
|
NETGEAR_HW_ID = 29763654+16+64
|
|
IMAGE_SIZE = 15872k
|
|
MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
|
|
IMAGES := sysupgrade.bin factory.img
|
|
endef
|
|
|
|
define Device/wndr3800
|
|
$(Device/wndr3700v2)
|
|
NETGEAR_BOARD_ID = WNDR3800
|
|
NETGEAR_HW_ID = 29763654+16+128
|
|
endef
|
|
|
|
define Device/wndr3800ch
|
|
$(Device/wndr3800)
|
|
NETGEAR_BOARD_ID = WNDR3800CH
|
|
endef
|
|
|
|
define Device/wndrmac
|
|
$(Device/wndr3700v2)
|
|
NETGEAR_BOARD_ID = WNDRMAC
|
|
endef
|
|
|
|
define Device/wndrmacv2
|
|
$(Device/wndr3800)
|
|
NETGEAR_BOARD_ID = WNDRMACv2
|
|
endef
|
|
|
|
TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
|
|
|
|
define Device/tplink
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HEADER_VERSION := 1
|
|
KERNEL := kernel-bin | patch-cmdline | lzma
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-initramfs
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
|
|
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
|
|
endef
|
|
|
|
define Device/tplink-nolzma
|
|
$(Device/tplink)
|
|
LOADER_FLASH_OFFS := 0x22000
|
|
COMPILE := loader-$(1).gz
|
|
COMPILE/loader-$(1).gz := loader-okli-compile
|
|
KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1)
|
|
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel | mktplinkfw-initramfs
|
|
endef
|
|
|
|
define Device/tplink-4m
|
|
$(Device/tplink-nolzma)
|
|
TPLINK_FLASHLAYOUT := 4M
|
|
IMAGE_SIZE := 3904k
|
|
endef
|
|
|
|
define Device/tplink-8m
|
|
$(Device/tplink-nolzma)
|
|
TPLINK_FLASHLAYOUT := 8M
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
|
|
define Device/tplink-4mlzma
|
|
$(Device/tplink)
|
|
TPLINK_FLASHLAYOUT := 4Mlzma
|
|
IMAGE_SIZE := 3904k
|
|
endef
|
|
|
|
define Device/tplink-8mlzma
|
|
$(Device/tplink)
|
|
TPLINK_FLASHLAYOUT := 8Mlzma
|
|
IMAGE_SIZE := 7936k
|
|
endef
|
|
|
|
define Device/tplink-16mlzma
|
|
$(Device/tplink)
|
|
TPLINK_FLASHLAYOUT := 16Mlzma
|
|
IMAGE_SIZE := 15872k
|
|
endef
|
|
|
|
define Device/tl-wdr4300-v1
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME = TL-WDR4300
|
|
DEVICE_PROFILE = TLWDR4300
|
|
TPLINK_HWID := 0x43000001
|
|
endef
|
|
|
|
define Device/tl-wdr3500-v1
|
|
$(Device/tl-wdr4300-v1)
|
|
BOARDNAME = TL-WDR3500
|
|
TPLINK_HWID := 0x35000001
|
|
endef
|
|
|
|
define Device/tl-wdr3600-v1
|
|
$(Device/tl-wdr4300-v1)
|
|
TPLINK_HWID := 0x36000001
|
|
endef
|
|
|
|
define Device/tl-wdr4300-v1-il
|
|
$(Device/tl-wdr4300-v1)
|
|
TPLINK_HWID := 0x43008001
|
|
endef
|
|
|
|
define Device/tl-wdr4310-v1
|
|
$(Device/tl-wdr4300-v1)
|
|
TPLINK_HWID := 0x43100001
|
|
endef
|
|
|
|
define Device/mw4530r-v1
|
|
$(Device/tl-wdr4300-v1)
|
|
TPLINK_HWID := 0x45300001
|
|
endef
|
|
TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il tl-wdr4310-v1 mw4530r-v1
|
|
|
|
define Device/tl-wdr6500-v2
|
|
$(Device/tplink-8mlzma)
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | mktplinkfw-initramfs
|
|
BOARDNAME = TL-WDR6500-v2
|
|
DEVICE_PROFILE = TLWDR6500V2
|
|
TPLINK_HWID := 0x65000002
|
|
TPLINK_HEADER_VERSION := 2
|
|
endef
|
|
TARGET_DEVICES += tl-wdr6500-v2
|
|
|
|
define Device/tl-wdr3320-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME = TL-WDR3320-v2
|
|
DEVICE_PROFILE = TLWDR3320V2
|
|
TPLINK_HWID := 0x33200002
|
|
TPLINK_HEADER_VERSION := 2
|
|
endef
|
|
TARGET_DEVICES += tl-wdr3320-v2
|
|
|
|
define Device/archer-c5-v1
|
|
$(Device/tplink-16mlzma)
|
|
BOARDNAME := ARCHER-C5
|
|
DEVICE_PROFILE := ARCHERC7
|
|
TPLINK_HWID := 0xc5000001
|
|
endef
|
|
|
|
define Device/archer-c7-v1
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := ARCHER-C7
|
|
DEVICE_PROFILE := ARCHERC7
|
|
TPLINK_HWID := 0x75000001
|
|
endef
|
|
|
|
define Device/archer-c7-v2
|
|
$(Device/tplink-16mlzma)
|
|
BOARDNAME := ARCHER-C7
|
|
DEVICE_PROFILE := ARCHERC7
|
|
TPLINK_HWID := 0xc7000002
|
|
endef
|
|
|
|
define Device/tl-wdr7500-v3
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := ARCHER-C7
|
|
DEVICE_PROFILE := ARCHERC7
|
|
TPLINK_HWID := 0x75000003
|
|
endef
|
|
TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 tl-wdr7500-v3
|
|
|
|
define Device/antminer-s1
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := ANTMINER-S1
|
|
DEVICE_PROFILE := ANTMINERS1
|
|
TPLINK_HWID := 0x04440101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/antminer-s3
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := ANTMINER-S3
|
|
DEVICE_PROFILE := ANTMINERS3
|
|
TPLINK_HWID := 0x04440301
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/el-m150
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := EL-M150
|
|
DEVICE_PROFILE := ELM150
|
|
TPLINK_HWID := 0x01500101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/el-mini
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := EL-MINI
|
|
DEVICE_PROFILE := ELMINI
|
|
TPLINK_HWID := 0x01530001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += antminer-s1 antminer-s3 el-m150 el-mini
|
|
|
|
define Device/gl-inet-6408A-v1
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := GL-INET
|
|
DEVICE_PROFILE := GLINET
|
|
TPLINK_HWID := 0x08000001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/gl-inet-6416A-v1
|
|
$(Device/tplink-16mlzma)
|
|
BOARDNAME := GL-INET
|
|
DEVICE_PROFILE := GLINET
|
|
TPLINK_HWID := 0x08000001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
|
|
|
|
define Device/rnx-n360rt
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR941ND
|
|
DEVICE_PROFILE := RNXN360RT
|
|
TPLINK_HWID := 0x09410002
|
|
TPLINK_HWREV := 0x00420001
|
|
endef
|
|
TARGET_DEVICES += rnx-n360rt
|
|
|
|
define Device/mc-mac1200r
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := MC-MAC1200R
|
|
DEVICE_PROFILE := MAC1200R
|
|
TPLINK_HWID := 0x12000001
|
|
endef
|
|
TARGET_DEVICES += mc-mac1200r
|
|
|
|
define Device/minibox-v1
|
|
$(Device/tplink-16mlzma)
|
|
BOARDNAME := MINIBOX-V1
|
|
DEVICE_PROFILE := MINIBOXV1
|
|
TPLINK_HWID := 0x3C000201
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += minibox-v1
|
|
|
|
define Device/onion-omega
|
|
$(Device/tplink-16mlzma)
|
|
BOARDNAME := ONION-OMEGA
|
|
DEVICE_PROFILE := OMEGA
|
|
TPLINK_HWID := 0x04700001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += onion-omega
|
|
|
|
define Device/tl-mr10u-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR10U
|
|
DEVICE_PROFILE := TLMR10U
|
|
TPLINK_HWID := 0x00100101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr11u-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR11U
|
|
DEVICE_PROFILE := TLMR11U
|
|
TPLINK_HWID := 0x00110101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr11u-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR11U
|
|
DEVICE_PROFILE := TLMR11U
|
|
TPLINK_HWID := 0x00110102
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr12u-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR13U
|
|
DEVICE_PROFILE := TLMR12U
|
|
TPLINK_HWID := 0x00120101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr13u-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR13U
|
|
DEVICE_PROFILE := TLMR13U
|
|
TPLINK_HWID := 0x00130101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += tl-mr10u-v1 tl-mr11u-v1 tl-mr11u-v2 tl-mr12u-v1 tl-mr13u-v1
|
|
|
|
define Device/tl-mr3020-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR3020
|
|
DEVICE_PROFILE := TLMR3020
|
|
TPLINK_HWID := 0x30200001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr3040-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR3040
|
|
DEVICE_PROFILE := TLMR3040
|
|
TPLINK_HWID := 0x30400001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr3040-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR3040-v2
|
|
DEVICE_PROFILE := TLMR3040
|
|
TPLINK_HWID := 0x30400002
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr3220-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-MR3220
|
|
DEVICE_PROFILE := TLMR3220
|
|
TPLINK_HWID := 0x32200001
|
|
endef
|
|
|
|
define Device/tl-mr3220-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR3220-v2
|
|
DEVICE_PROFILE := TLMR3220
|
|
TPLINK_HWID := 0x32200002
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-mr3420-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-MR3420
|
|
DEVICE_PROFILE := TLMR3420
|
|
TPLINK_HWID := 0x34200001
|
|
endef
|
|
|
|
define Device/tl-mr3420-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-MR3420-v2
|
|
DEVICE_PROFILE := TLMR3420
|
|
TPLINK_HWID := 0x34200002
|
|
endef
|
|
TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2
|
|
|
|
define Device/tl-wr703n-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR703N
|
|
DEVICE_PROFILE := TLWR703
|
|
TPLINK_HWID := 0x07030101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr710n-v1
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := TL-WR710N
|
|
DEVICE_PROFILE := TLWR710
|
|
TPLINK_HWID := 0x07100001
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr710n-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR710N
|
|
DEVICE_PROFILE := TLWR710
|
|
TPLINK_HWID := 0x07100002
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr720n-v3
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR720N-v3
|
|
DEVICE_PROFILE := TLWR720
|
|
TPLINK_HWID := 0x07200103
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr720n-v4
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR720N-v3
|
|
DEVICE_PROFILE := TLWR720
|
|
TPLINK_HWID := 0x07200104
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += tl-wr703n-v1 tl-wr710n-v1 tl-wr710n-v2 tl-wr720n-v3 tl-wr720n-v4
|
|
|
|
define Device/tl-wr740n-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR740
|
|
TPLINK_HWID := 0x07400001
|
|
endef
|
|
|
|
define Device/tl-wr740n-v3
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR740
|
|
TPLINK_HWID := 0x07400003
|
|
endef
|
|
|
|
define Device/tl-wr740n-v4
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR741ND-v4
|
|
DEVICE_PROFILE := TLWR740
|
|
TPLINK_HWID := 0x07400004
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr740n-v5
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR741ND-v4
|
|
DEVICE_PROFILE := TLWR740
|
|
TPLINK_HWID := 0x07400005
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr741nd-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR741
|
|
TPLINK_HWID := 0x07410001
|
|
endef
|
|
|
|
define Device/tl-wr741nd-v2
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR741
|
|
TPLINK_HWID := 0x07410001
|
|
endef
|
|
|
|
define Device/tl-wr741nd-v4
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR741ND-v4
|
|
DEVICE_PROFILE := TLWR741
|
|
TPLINK_HWID := 0x07410004
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr741nd-v5
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR741ND-v4
|
|
DEVICE_PROFILE := TLWR741
|
|
TPLINK_HWID := 0x07400005
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wr743nd-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR743
|
|
TPLINK_HWID := 0x07430001
|
|
endef
|
|
|
|
define Device/tl-wr743nd-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR741ND-v4
|
|
DEVICE_PROFILE := TLWR743
|
|
TPLINK_HWID := 0x07430002
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr741nd-v1 tl-wr741nd-v2 tl-wr741nd-v4 tl-wr741nd-v5 tl-wr743nd-v1 tl-wr743nd-v2
|
|
|
|
define Device/tl-wr841nd-v1.5
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR841N-v1.5
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410002
|
|
TPLINK_HWREV := 2
|
|
endef
|
|
|
|
define Device/tl-wr841nd-v3
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR941ND
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410003
|
|
TPLINK_HWREV := 3
|
|
endef
|
|
|
|
define Device/tl-wr841nd-v5
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410005
|
|
endef
|
|
|
|
define Device/tl-wr841nd-v7
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR841N-v7
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410007
|
|
endef
|
|
|
|
define Device/tl-wr841n-v8
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR841N-v8
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410008
|
|
endef
|
|
|
|
define Device/tl-wr841n-v9
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR841N-v9
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410009
|
|
endef
|
|
|
|
define Device/tl-wr841n-v10
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR841N-v9
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08410010
|
|
endef
|
|
|
|
define Device/tl-wr842n-v1
|
|
$(Device/tplink-8m)
|
|
BOARDNAME := TL-MR3420
|
|
DEVICE_PROFILE := TLWR842
|
|
TPLINK_HWID := 0x08420001
|
|
endef
|
|
|
|
define Device/tl-wr842n-v2
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := TL-WR842N-v2
|
|
DEVICE_PROFILE := TLWR842
|
|
TPLINK_HWID := 0x8420002
|
|
endef
|
|
|
|
define Device/tl-wr843nd-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR841N-v8
|
|
DEVICE_PROFILE := TLWR843
|
|
TPLINK_HWID := 0x08430001
|
|
endef
|
|
|
|
define Device/tl-wr847n-v8
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR841N-v8
|
|
DEVICE_PROFILE := TLWR841
|
|
TPLINK_HWID := 0x08470008
|
|
endef
|
|
TARGET_DEVICES += tl-wr841nd-v1.5 tl-wr841nd-v3 tl-wr841nd-v5 tl-wr841nd-v7 tl-wr841n-v8 tl-wr841n-v9 tl-wr841n-v10 tl-wr842n-v1 tl-wr842n-v2 tl-wr843nd-v1 tl-wr847n-v8
|
|
|
|
define Device/tl-wr941nd-v2
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR941ND
|
|
DEVICE_PROFILE := TLWR941
|
|
TPLINK_HWID := 0x09410002
|
|
TPLINK_HWREV := 2
|
|
endef
|
|
|
|
define Device/tl-wr941nd-v3
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR941ND
|
|
DEVICE_PROFILE := TLWR941
|
|
TPLINK_HWID := 0x09410002
|
|
TPLINK_HWREV := 2
|
|
endef
|
|
|
|
define Device/tl-wr941nd-v4
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WR741ND
|
|
DEVICE_PROFILE := TLWR941
|
|
TPLINK_HWID := 0x09410004
|
|
endef
|
|
|
|
define Device/tl-wr941nd-v5
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR941ND-v5
|
|
DEVICE_PROFILE := TLWR941
|
|
TPLINK_HWID := 0x09410005
|
|
endef
|
|
|
|
define Device/tl-wr941nd-v6
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR941ND-v6
|
|
DEVICE_PROFILE := TLWR941
|
|
TPLINK_HWID := 0x09410006
|
|
endef
|
|
|
|
# Chinese version (unlike European) is similar to the TL-WDR3500
|
|
define Device/tl-wr941nd-v6-cn
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WDR3500
|
|
DEVICE_PROFILE := TLWR941
|
|
TPLINK_HWID := 0x09410006
|
|
endef
|
|
TARGET_DEVICES += tl-wr941nd-v2 tl-wr941nd-v3 tl-wr941nd-v4 tl-wr941nd-v5 tl-wr941nd-v6 tl-wr941nd-v6-cn
|
|
|
|
define Device/tl-wr1041n-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WR1041N-v2
|
|
DEVICE_PROFILE := TLWR1041
|
|
TPLINK_HWID := 0x10410002
|
|
endef
|
|
TARGET_DEVICES += tl-wr1041n-v2
|
|
|
|
define Device/tl-wr1043nd-v1
|
|
$(Device/tplink-8m)
|
|
BOARDNAME := TL-WR1043ND
|
|
DEVICE_PROFILE := TLWR1043
|
|
TPLINK_HWID := 0x10430001
|
|
endef
|
|
|
|
define Device/tl-wr1043nd-v2
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := TL-WR1043ND-v2
|
|
DEVICE_PROFILE := TLWR1043
|
|
TPLINK_HWID := 0x10430002
|
|
endef
|
|
|
|
define Device/tl-wr1043nd-v3
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := TL-WR1043ND-v2
|
|
DEVICE_PROFILE := TLWR1043
|
|
TPLINK_HWID := 0x10430003
|
|
endef
|
|
TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3
|
|
|
|
define Device/tl-wr2543-v1
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := TL-WR2543N
|
|
DEVICE_PROFILE := TLWR2543
|
|
TPLINK_HWID := 0x25430001
|
|
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade "-v 3.13.99"
|
|
IMAGE/factory.bin := append-rootfs | mktplinkfw factory "-v 3.13.99"
|
|
endef
|
|
TARGET_DEVICES += tl-wr2543-v1
|
|
|
|
define Device/tl-wdr4900-v2
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := TL-WDR4900-v2
|
|
DEVICE_PROFILE := TLWDR4900V2
|
|
TPLINK_HWID := 0x49000002
|
|
endef
|
|
TARGET_DEVICES += tl-wdr4900-v2
|
|
|
|
define Device/tl-wa701n-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA901ND
|
|
DEVICE_PROFILE := TLWA701
|
|
TPLINK_HWID := 0x07010001
|
|
endef
|
|
|
|
define Device/tl-wa701nd-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA701ND-v2
|
|
DEVICE_PROFILE := TLWA701
|
|
TPLINK_HWID := 0x07010002
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
|
|
define Device/tl-wa730rev1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA901ND
|
|
DEVICE_PROFILE := TLWA730RE
|
|
TPLINK_HWID := 0x07300001
|
|
endef
|
|
|
|
define Device/tl-wa750re-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA750RE
|
|
DEVICE_PROFILE := TLWA750
|
|
TPLINK_HWID := 0x07500001
|
|
endef
|
|
|
|
define Device/tl-wa7510n
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA7510N
|
|
DEVICE_PROFILE := TLWA7510
|
|
TPLINK_HWID := 0x75100001
|
|
endef
|
|
TARGET_DEVICES += tl-wa701n-v1 tl-wa701nd-v2 tl-wa730rev1 tl-wa750re-v1 tl-wa7510n
|
|
|
|
define Device/tl-wa801nd-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA901ND
|
|
DEVICE_PROFILE := TLWA801
|
|
TPLINK_HWID := 0x08010001
|
|
endef
|
|
|
|
define Device/tl-wa801nd-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA801ND-v2
|
|
DEVICE_PROFILE := TLWA801
|
|
TPLINK_HWID := 0x08010002
|
|
endef
|
|
|
|
define Device/tl-wa830re-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA901ND
|
|
DEVICE_PROFILE := TLWA830
|
|
TPLINK_HWID := 0x08300010
|
|
endef
|
|
|
|
define Device/tl-wa830re-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA830RE-v2
|
|
DEVICE_PROFILE := TLWA830
|
|
TPLINK_HWID := 0x08300002
|
|
endef
|
|
|
|
define Device/tl-wa850re-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA850RE
|
|
DEVICE_PROFILE := TLWA850
|
|
TPLINK_HWID := 0x08500001
|
|
endef
|
|
|
|
define Device/tl-wa860re-v1
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA860RE
|
|
DEVICE_PROFILE := TLWA860
|
|
TPLINK_HWID := 0x08600001
|
|
endef
|
|
TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1
|
|
|
|
define Device/tl-wa901nd-v1
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA901ND
|
|
DEVICE_PROFILE := TLWA901
|
|
TPLINK_HWID := 0x09010001
|
|
endef
|
|
|
|
define Device/tl-wa901nd-v2
|
|
$(Device/tplink-4m)
|
|
BOARDNAME := TL-WA901ND-v2
|
|
DEVICE_PROFILE := TLWA901
|
|
TPLINK_HWID := 0x09010002
|
|
endef
|
|
|
|
define Device/tl-wa901nd-v3
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA901ND-v3
|
|
DEVICE_PROFILE := TLWA901
|
|
TPLINK_HWID := 0x09010003
|
|
endef
|
|
TARGET_DEVICES += tl-wa901nd-v1 tl-wa901nd-v2 tl-wa901nd-v3
|
|
|
|
define Device/tl-wa7210n-v2
|
|
$(Device/tplink-4mlzma)
|
|
BOARDNAME := TL-WA7210N-v2
|
|
DEVICE_PROFILE := TLWA7210
|
|
TPLINK_HWID := 0x72100002
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += tl-wa7210n-v2
|
|
|
|
define Device/smart-300
|
|
$(Device/tplink-8mlzma)
|
|
BOARDNAME := SMART-300
|
|
DEVICE_PROFILE := SMART-300
|
|
TPLINK_HWID := 0x93410001
|
|
endef
|
|
TARGET_DEVICES += smart-300
|
|
|
|
define Device/oolite
|
|
$(Device/tplink-16mlzma)
|
|
BOARDNAME := GS-OOLITE
|
|
DEVICE_PROFILE := OOLITE
|
|
TPLINK_HWID := 0x3C000101
|
|
CONSOLE := ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += oolite
|
|
|
|
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
|
|
# UBNT_TYPE e.g. one of (BZ, XM, XW)
|
|
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
|
|
define Device/ubnt-xm
|
|
DEVICE_PROFILE := UBNT
|
|
IMAGE_SIZE := 7552k
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
|
|
UBNT_TYPE := XM
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar7240
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/ubnt-xw
|
|
DEVICE_PROFILE := UBNT
|
|
IMAGE_SIZE := 7552k
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
|
|
UBNT_TYPE := XW
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar934x
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/ubnt-bz
|
|
DEVICE_PROFILE := UBNT
|
|
IMAGE_SIZE := 7552k
|
|
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
|
|
UBNT_TYPE := BZ
|
|
UBNT_BOARD := XM
|
|
UBNT_CHIP := ar934x
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
|
|
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
|
|
define Device/rw2458n
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := RW2458N
|
|
endef
|
|
|
|
define Device/ubnt-airrouter
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := UBNT-AR
|
|
endef
|
|
|
|
define Device/ubnt-bullet-m
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := UBNT-BM
|
|
endef
|
|
|
|
define Device/ubnt-rocket-m
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := UBNT-RM
|
|
endef
|
|
|
|
define Device/ubnt-nano-m
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := UBNT-NM
|
|
endef
|
|
TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m
|
|
|
|
define Device/ubnt-unifi
|
|
$(Device/ubnt-bz)
|
|
BOARDNAME := UBNT-UF
|
|
DEVICE_PROFILE := UBNT UBNTUNIFI
|
|
endef
|
|
|
|
define Device/ubnt-unifi-outdoor
|
|
$(Device/ubnt-bz)
|
|
BOARDNAME := UBNT-U20
|
|
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
|
|
endef
|
|
TARGET_DEVICES += ubnt-unifi ubnt-unifi-outdoor
|
|
|
|
define Device/ubnt-nano-m-xw
|
|
$(Device/ubnt-xw)
|
|
BOARDNAME := UBNT-NM-XW
|
|
endef
|
|
|
|
define Device/ubnt-loco-m-xw
|
|
$(Device/ubnt-xw)
|
|
BOARDNAME := UBNT-LOCO-XW
|
|
endef
|
|
|
|
define Device/ubnt-rocket-m-xw
|
|
$(Device/ubnt-xw)
|
|
BOARDNAME := UBNT-RM-XW
|
|
endef
|
|
|
|
define Device/ubnt-rocket-m-ti
|
|
$(Device/ubnt-xw)
|
|
BOARDNAME := UBNT-RM-TI
|
|
UBNT_TYPE := TI
|
|
UBNT_BOARD := XM
|
|
endef
|
|
TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti
|
|
|
|
define Device/ubnt-air-gateway
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := UBNT-AGW
|
|
UBNT_BOARD := XM
|
|
UBNT_TYPE := AirGW
|
|
UBNT_CHIP := ar933x
|
|
CONSOLE = ttyATH0,115200
|
|
endef
|
|
TARGET_DEVICES += ubnt-air-gateway
|
|
|
|
define Device/ubnt-air-gateway-pro
|
|
$(Device/ubnt-xm)
|
|
BOARDNAME := UBNT-AGWP
|
|
UBNT_TYPE := AirGWP
|
|
UBNT_CHIP := ar934x
|
|
CONSOLE = ttyS0,115200
|
|
endef
|
|
TARGET_DEVICES += ubnt-air-gateway-pro
|
|
|
|
define Device/ubdev01
|
|
$(Device/ubnt-xm)
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
|
|
BOARDNAME := UBNT-UF
|
|
UBNT_BOARD := XM
|
|
UBNT_TYPE := XM
|
|
UBNT_CHIP := ar7240
|
|
endef
|
|
|
|
TARGET_DEVICES += ubdev01
|
|
|
|
define Device/ubnt-routerstation
|
|
IMAGE_SIZE := 16128k
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage
|
|
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
|
|
endef
|
|
|
|
define Device/ubnt-rs
|
|
$(Device/ubnt-routerstation)
|
|
BOARDNAME := UBNT-RS
|
|
DEVICE_PROFILE := Madwifi UBNT UBNTRS
|
|
UBNT_BOARD := RS
|
|
UBNT_TYPE := RSx
|
|
UBNT_CHIP := ar7100
|
|
endef
|
|
|
|
define Device/ubnt-rspro
|
|
$(Device/ubnt-routerstation)
|
|
BOARDNAME := UBNT-RSPRO
|
|
DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
|
|
UBNT_BOARD := RSPRO
|
|
UBNT_TYPE := RSPRO
|
|
UBNT_CHIP := ar7100pro
|
|
endef
|
|
|
|
define Device/ubnt-ls-sr71
|
|
$(Device/ubnt-routerstation)
|
|
BOARDNAME := UBNT-LS-SR71
|
|
DEVICE_PROFILE := Madwifi UBNT
|
|
UBNT_BOARD := LS-SR71
|
|
UBNT_TYPE := LS-SR71
|
|
UBNT_CHIP := ar7100
|
|
endef
|
|
|
|
TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71
|
|
|
|
define Device/ubnt-uap-pro
|
|
KERNEL_SIZE := 1536k
|
|
IMAGE_SIZE := 15744k
|
|
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
|
|
UBNT_TYPE := BZ
|
|
UBNT_CHIP := ar934x
|
|
BOARDNAME := UAP-PRO
|
|
DEVICE_PROFILE := UBNT UAPPRO
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
|
|
IMAGES := sysupgrade.bin factory.bin
|
|
IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2
|
|
endef
|
|
|
|
define Device/ubnt-unifi-outdoor-plus
|
|
$(Device/ubnt-uap-pro)
|
|
UBNT_CHIP := ar7240
|
|
BOARDNAME := UBNT-UOP
|
|
DEVICE_PROFILE := UBNT
|
|
endef
|
|
|
|
TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus
|
|
|
|
rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1)))
|
|
|
|
# $(1): rootfs type.
|
|
# $(2): board name.
|
|
define imgname
|
|
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
|
|
endef
|
|
|
|
define rootfs_align
|
|
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
|
|
endef
|
|
|
|
define sysupname
|
|
$(call imgname,$(1),$(2))-sysupgrade.bin
|
|
endef
|
|
|
|
define factoryname
|
|
$(call imgname,$(1),$(2))-factory.bin
|
|
endef
|
|
|
|
COMMA:=,
|
|
|
|
define mkcmdline
|
|
$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
|
|
endef
|
|
|
|
define mtdpartsize
|
|
$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
|
|
endef
|
|
|
|
SINGLE_PROFILES:=
|
|
|
|
# $(1) : name of image build method to be used, e.g., AthLzma.
|
|
# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
|
|
# $(3) : name of the profile to be defined.
|
|
# $(4) : board name.
|
|
# $(5)~$(7) : arguments for $(mkcmdline)
|
|
# board=$(1) console=$(2),$(3)
|
|
# $(8)~$(14): extra arguments.
|
|
define SingleProfile
|
|
# $(1): action name, e.g. loader, buildkernel, squashfs, etc.
|
|
define Image/Build/Profile/$(3)
|
|
$$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
|
|
endef
|
|
SINGLE_PROFILES += $(3)
|
|
endef
|
|
|
|
# $(1), name of the MultiProfile to be added.
|
|
# $(2), name of Profiles to be included in the MultiProfile.
|
|
define MultiProfile
|
|
define Image/Build/Profile/$(1)
|
|
$(foreach p,$(2),
|
|
$$(call Image/Build/Profile/$p,$$(1))
|
|
)
|
|
endef
|
|
endef
|
|
|
|
LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
|
|
|
|
VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
|
|
UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
|
|
|
|
# $(1): input file.
|
|
# $(2): output file.
|
|
# $(3): extra arguments for lzma.
|
|
define CompressLzma
|
|
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
|
|
endef
|
|
|
|
define PatchKernel
|
|
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
|
|
endef
|
|
|
|
define PatchKernel/initramfs
|
|
$(call PatchKernel,$(1),$(2),-initramfs)
|
|
cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
|
|
endef
|
|
|
|
# $(1): board name.
|
|
# $(2): kernel command line.
|
|
# $(3): extra argumetns for lzma.
|
|
# $(4): name suffix, e.g. "-initramfs".
|
|
define PatchKernelLzma
|
|
cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
|
|
$(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
|
|
endef
|
|
|
|
define PatchKernelGzip
|
|
cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
|
|
gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
|
|
endef
|
|
|
|
ifneq ($(SUBTARGET),mikrotik)
|
|
# $(1): compression method of the data.
|
|
# $(2): extra arguments.
|
|
# $(3): input data file.
|
|
# $(4): output file.
|
|
define MkuImage
|
|
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
|
|
-e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(3) $(4)
|
|
endef
|
|
|
|
# $(1): board name.
|
|
# $(2): kernel command line.
|
|
# $(3): extra arguments for lzma.
|
|
# $(4): name suffix, e.g. "-initramfs".
|
|
# $(5): extra arguments for mkimage.
|
|
define MkuImageLzma
|
|
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
|
|
$(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
|
|
endef
|
|
|
|
define MkuImageLzma/initramfs
|
|
$(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
|
|
$(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
|
|
endef
|
|
|
|
define MkuImageGzip
|
|
$(call PatchKernelGzip,$(1),$(2))
|
|
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
|
|
endef
|
|
|
|
define MkuImageGzip/initramfs
|
|
$(call PatchKernelGzip,$(1),$(2),-initramfs)
|
|
$(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
|
|
endef
|
|
|
|
define MkuImageOKLI
|
|
$(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
|
|
endef
|
|
endif
|
|
|
|
# $(1): name of the 1st file.
|
|
# $(2): size limit of the 1st file if it is greater than 262144, or
|
|
# the erase size of the flash if it is greater than zero and less
|
|
# than 262144
|
|
# $(3): name of the 2nd file.
|
|
# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
|
|
# it is the size limit of the output file
|
|
# $(5): name of the output file.
|
|
# $(6): padding size.
|
|
define CatFiles
|
|
if [ $(2) -eq 0 ]; then \
|
|
filename="$(3)"; fstype=$$$${filename##*\.}; \
|
|
case "$$$${fstype}" in \
|
|
"jffs2-64k") bs=65536;; \
|
|
"jffs2-128k") bs=131072;; \
|
|
"jffs2-256k") bs=262144;; \
|
|
*) bs=`stat -c%s $(1)`;; \
|
|
esac; \
|
|
( dd if=$(1) bs=$$$${bs} conv=sync; cat $(3) ) > $(5); \
|
|
if [ -n "$(6)" ]; then \
|
|
case "$$$${fstype}" in \
|
|
squashfs*) \
|
|
padjffs2 $(5) $(6); \
|
|
;; \
|
|
esac; \
|
|
fi; \
|
|
if [ `stat -c%s $(5)` -gt $(4) ]; then \
|
|
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
|
|
rm -f $(5); \
|
|
fi; \
|
|
else if [ $(2) -gt 262144 ]; then \
|
|
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
|
|
echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
|
|
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
|
|
echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
|
|
else \
|
|
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
|
|
fi; fi; \
|
|
else \
|
|
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
|
|
if [ `stat -c%s $(5)` -gt $(4) ]; then \
|
|
echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
|
|
rm -f $(5); \
|
|
fi; \
|
|
fi; fi
|
|
endef
|
|
|
|
# $(1): rootfs type.
|
|
# $(2): board name.
|
|
# $(3): kernel image size limit.
|
|
# $(4): rootfs image size limit.
|
|
# $(5): padding argument for padjffs2.
|
|
Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
|
|
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
|
|
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
|
|
|
|
# $(1): ubinize ini file
|
|
# $(2): working directory
|
|
# $(3): output file
|
|
# $(4): physical erase block size
|
|
# $(5): minimum I/O unit size
|
|
# $(6): custom options
|
|
define ubinize
|
|
$(CP) $(1) $(2)
|
|
( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
|
|
endef
|
|
|
|
#
|
|
# Embed lzma-compressed kernel inside lzma-loader.
|
|
#
|
|
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
|
|
# $(2), suffix of target file to build, e.g. bin, gz, elf
|
|
# $(3), kernel command line to pass from lzma-loader to kernel
|
|
# $(4), unused here
|
|
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
|
|
define Image/BuildLoader
|
|
-rm -rf $(KDIR)/lzma-loader
|
|
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
|
|
compile loader.$(2)
|
|
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
|
|
endef
|
|
|
|
#
|
|
# Embed patched lzma-compressed kernel inside lzma-loader.
|
|
#
|
|
# Specifying the command line via the lzma-loader doesn't work with some
|
|
# models (like the TP-LINK CPE series), so this version first patches the
|
|
# command line in the image and then builds the loader around it.
|
|
#
|
|
# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
|
|
# $(2), suffix of target file to build, e.g. bin, gz, elf
|
|
# $(3), kernel command line to pass from lzma-loader to kernel
|
|
# $(4), unused here
|
|
# $(5), suffix of kernel filename, e.g. -initramfs, or empty
|
|
define Image/BuildLoaderPatched
|
|
$(call PatchKernelLzma,$(1),$(3))
|
|
-rm -rf $(KDIR)/lzma-loader
|
|
$(LOADER_MAKE) LOADER=loader-$(1).$(2) \
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
LOADER_DATA="$(KDIR_TMP)/vmlinux-$(1)$(5).bin.lzma" BOARD="$(1)" \
|
|
compile loader.$(2)
|
|
-$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2)
|
|
endef
|
|
|
|
#
|
|
# Build lzma-loader alone which will search for lzma-compressed kernel identified by
|
|
# uImage header with magic "OKLI" at boot time.
|
|
#
|
|
# $(4), offset into the flash space to start searching uImage magic "OKLI".
|
|
# $(5), size of search range starting at $(4). With 0 as the value, uImage
|
|
# header is expected to be at precisely $(4)
|
|
define Image/BuildLoaderAlone
|
|
-rm -rf $(KDIR)/lzma-loader
|
|
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
|
|
LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
|
|
BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
|
|
compile loader.$(2)
|
|
endef
|
|
|
|
define Build/Clean
|
|
$(LOADER_MAKE) clean
|
|
endef
|
|
|
|
|
|
alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
|
|
alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
|
|
all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)
|
|
all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
|
|
ap81_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,5120k(rootfs),2688k(kernel),64k(art)ro,7808k@0x50000(firmware)
|
|
ap83_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,4096k(rootfs),3648k(kernel),64k(art)ro,7744k@0x60000(firmware)
|
|
ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
|
|
ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
|
|
ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
|
|
ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2448k(rootfs),1200k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
|
|
ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware)
|
|
ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
|
|
ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
|
|
ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware)
|
|
ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
|
|
bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
|
|
cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
|
|
cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
|
|
cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
|
|
cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
|
|
cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
|
|
cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
|
|
cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
|
|
cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
|
|
cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware)
|
|
cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
|
|
eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
|
|
db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
|
|
dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
|
|
dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro
|
|
dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro
|
|
cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
|
|
cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
|
|
esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
|
esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
|
epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
|
|
ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art)
|
|
ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
|
|
f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
|
|
dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
|
|
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
|
|
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
|
|
hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware)
|
|
mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
|
|
mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware)
|
|
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
|
|
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
|
|
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
|
|
uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
|
|
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
|
|
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
|
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
|
|
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
|
|
wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware)
|
|
wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
|
|
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
|
|
wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
|
|
r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
|
|
wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
|
|
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
|
|
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
|
|
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
|
|
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
|
|
qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
|
|
yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
|
|
yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware)
|
|
|
|
|
|
define Image/BuildKernel
|
|
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
|
|
cp $(KDIR)/vmlinux $(VMLINUX).bin
|
|
dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
|
|
dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync
|
|
$(call MkuImage,gzip,,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin)
|
|
$(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
|
|
cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
|
|
-mkdir -p $(KDIR_TMP)
|
|
$(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel)
|
|
endef
|
|
|
|
define Image/BuildKernel/Initramfs
|
|
cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
|
|
cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
|
|
dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
|
|
dd if=$(KDIR)/vmlinux-initramfs.bin.gz of=$(VMLINUX)-initramfs.gz bs=65536 conv=sync
|
|
$(call MkuImage,gzip,,$(KDIR)/vmlinux-initramfs.bin.gz,$(UIMAGE)-initramfs-gzip.bin)
|
|
$(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
|
|
cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
|
|
$(call Image/Build/Initramfs)
|
|
endef
|
|
|
|
Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
|
|
define Image/Build/WRT400N
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
define Image/Build/CameoAP94/buildkernel
|
|
$(call MkuImageLzma,$(2),$(3) $(4))
|
|
$(call MkuImageLzma,$(2)-fat,$(3) $(5))
|
|
endef
|
|
|
|
define Image/Build/CameoAP94
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
dd if=$(call sysupname,$(1),$(2)); \
|
|
echo -n "$(6)"; \
|
|
) > $(call imgname,$(1),$(2))-backup-loader.bin; \
|
|
if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
|
|
echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
|
|
else \
|
|
( \
|
|
dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
|
|
echo -n "$(7)"; \
|
|
) > $(call factoryname,$(1),$(2)); \
|
|
fi; \
|
|
fi
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
|
|
if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
|
|
echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
|
|
sh $(TOPDIR)/scripts/combined-image.sh \
|
|
"$(KDIR_TMP)/$(2)-fat.bin" \
|
|
"$(KDIR_TMP)/$(2)-fat.dummy" \
|
|
$(call sysupname,$(1),$(2)-fat); \
|
|
fi
|
|
endef
|
|
|
|
define Image/Build/WZRHP
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(3)-4*$(4)*1024)),$(4))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
|
|
dd if=$(call sysupname,$(1),$(2)); \
|
|
) > $(call imgname,$(1),$(2))-tftp.bin; \
|
|
buffalo-enc -p $(5) -v 1.99 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(KDIR_TMP)/$(2).enc; \
|
|
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
|
|
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
|
|
-i $(KDIR_TMP)/$(2).enc \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
|
|
|
|
Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
|
|
|
|
|
|
Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/WHRHPG300N
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
|
|
dd if=$(call sysupname,$(1),$(2)); \
|
|
) > $(call imgname,$(1),$(2))-tftp.bin; \
|
|
buffalo-enc -p $(5) -v 1.99 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(KDIR_TMP)/$(2).enc; \
|
|
buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
|
|
-w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
|
|
-i $(KDIR_TMP)/$(2).enc \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
define Image/Build/Cameo
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
factory_size=$$$$(($(fwsize) - $(6))); \
|
|
( \
|
|
dd if=$(call sysupname,$(1),$(2)) bs=$$$${factory_size} conv=sync; \
|
|
echo -n $(5); \
|
|
) > $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
|
|
Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
|
|
Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
|
|
|
|
Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
|
|
Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
|
|
Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
|
|
|
|
Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
|
|
Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
|
|
Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
|
|
|
|
Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
|
|
Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
|
|
Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
|
|
|
|
Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
|
|
Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
|
|
Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
|
|
Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
|
|
|
|
Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
|
|
Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
|
|
Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
|
|
|
|
define Image/Build/CameoHornet
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
for r in $(7); do \
|
|
[ -n "$$$$r" ] && dashr="-$$$$r" || dashr=; \
|
|
[ -z "$$$$r" ] && r="DEF"; \
|
|
mkcameofw -M HORNET -R "$$$$r" -S $(5) -V $(6) -c \
|
|
-K $(8) -I $(fwsize) \
|
|
-k "$(call sysupname,$(1),$(2))" \
|
|
-o $(call imgname,$(1),$(2))-factory$$$$dashr.bin; \
|
|
true; \
|
|
done; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
|
|
Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
|
|
Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
|
|
|
|
Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
|
|
Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
|
|
Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
|
|
|
|
define Image/Build/dLAN
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
|
|
if [ -e "$(call factoryname,$(1),$(2))" ]; then \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Ath
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
|
|
Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
|
|
|
|
Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
|
|
Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Belkin
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
|
|
-n "uImage" \
|
|
-i $(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
-o $(KDIR_TMP)/$(2)-uImage; \
|
|
edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \
|
|
-n "rootfs" \
|
|
-i $(KDIR)/root.$(1) \
|
|
-o $(KDIR_TMP)/$(2)-rootfs; \
|
|
( \
|
|
dd if=$(KDIR_TMP)/$(2)-rootfs; \
|
|
dd if=$(KDIR_TMP)/$(2)-uImage; \
|
|
) > "$(call factoryname,$(1),$(2))"; \
|
|
fi
|
|
endef
|
|
|
|
define Image/Build/EnGenius
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
|
|
$(eval kernsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
|
|
mksenaofw -e $(call sysupname,$(1),$(2)) \
|
|
-o $(call imgname,$(1),$(2))-factory.dlf \
|
|
-r 0x101 -p $(7) -t 2; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
|
|
define MkuImageHiWiFi
|
|
# Field ih_name needs to start with "tw150v1"
|
|
mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
|
|
-e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(3) $(4)
|
|
endef
|
|
|
|
define MkuImageLzmaHiWiFi
|
|
$(call PatchKernelLzma,$(1),$(2),$(3),$(4))
|
|
$(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
|
|
endef
|
|
|
|
Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4))
|
|
Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
|
|
Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
|
|
|
|
define Image/Build/PB4X
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
|
|
of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
|
|
-sh $(TOPDIR)/scripts/combined-image.sh \
|
|
"$(call imgname,kernel,$(2)).bin" \
|
|
"$(call imgname,$(1),$(2)-rootfs).bin" \
|
|
$(call sysupname,$(1),$(2))
|
|
endef
|
|
|
|
|
|
Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
|
|
Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
|
|
|
|
define Image/Build/MyLoader
|
|
$(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
|
|
$(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
|
|
if [ -e "$(fwimage)" ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
|
|
-p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
|
|
$(call imgname,$(1),$(2))-$(5)-factory.img; \
|
|
echo -n "" > $(KDIR_TMP)/empty.bin; \
|
|
sh $(TOPDIR)/scripts/combined-image.sh \
|
|
$(fwimage) $(KDIR_TMP)/empty.bin \
|
|
$(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
|
|
fi
|
|
endef
|
|
|
|
Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
|
|
Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
|
|
|
|
define Image/Build/Planex/buildkernel
|
|
[ -e "$(KDIR)/loader-$(2).gz" ]
|
|
$(call MkuImageOKLI,$(2))
|
|
( \
|
|
dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
|
|
) > $(KDIR_TMP)/kernel-$(2).bin
|
|
$(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
endef
|
|
|
|
define Image/Build/Planex
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkplanexfw \
|
|
-B $(2) \
|
|
-v 2.00.00 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/ALFA
|
|
$(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
rm -rf $(KDIR)/$(1); \
|
|
mkdir -p $(KDIR)/$(1); \
|
|
cd $(KDIR)/$(1); \
|
|
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
|
|
cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
|
|
$(TAR) zcf $(call factoryname,$(1),$(2)) -C $(KDIR)/$(1) $(7) $(8); \
|
|
( \
|
|
echo WRM7222C | dd bs=32 count=1 conv=sync; \
|
|
echo -ne '\xfe'; \
|
|
) >> $(call factoryname,$(1),$(2)); \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/Seama/loader=$(call Image/BuildLoader,$(1),bin,$(2) $(3),0x80060000)
|
|
|
|
define Image/Build/Seama
|
|
[ -e "$(KDIR)/loader-$(2).bin" ]
|
|
$(call CompressLzma,$(KDIR)/loader-$(2).bin,$(KDIR_TMP)/loader-$(2).bin.lzma)
|
|
-rm -f $(KDIR_TMP)/image-$(2).tmp
|
|
$(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp)
|
|
[ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \
|
|
head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \
|
|
$(STAGING_DIR_HOST)/bin/seama \
|
|
-i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \
|
|
-m "dev=/dev/mtdblock/1" -m "type=firmware"; \
|
|
$(STAGING_DIR_HOST)/bin/seama \
|
|
-s $(call imgname,$(1),$(2))-factory.bin \
|
|
-m "signature=$(5)" \
|
|
-i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \
|
|
tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \
|
|
}
|
|
cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp
|
|
$(STAGING_DIR_HOST)/bin/seama \
|
|
-i $(KDIR_TMP)/image-$(2)-sysupgrade.tmp \
|
|
-m "dev=/dev/mtdblock/1" -m "type=firmware"
|
|
$(call CatFiles,$(KDIR_TMP)/image-$(2)-sysupgrade.tmp.seama,$(6),$(KDIR)/root.$(1),$(7),$(call sysupname,$(1),$(2)))
|
|
endef
|
|
|
|
define Image/Build/Seama/initramfs
|
|
$(call PatchKernelLzma,$(2),$(3) $(4),,-initramfs)
|
|
$(STAGING_DIR_HOST)/bin/seama \
|
|
-i $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \
|
|
-m "dev=/dev/mtdblock/1" -m "type=firmware"
|
|
cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin
|
|
endef
|
|
|
|
Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Senao
|
|
mkdir -p $(KDIR_TMP)/$(2)/
|
|
touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
|
|
-$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
|
|
dd if=$(KDIR)/root.$(1) \
|
|
of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
|
|
( \
|
|
cd $(KDIR_TMP)/$(2)/; \
|
|
$(TAR) -cz -f $(call factoryname,$(1),$(2)) * \
|
|
)
|
|
-rm -rf $(KDIR_TMP)/$(2)/
|
|
-sh $(TOPDIR)/scripts/combined-image.sh \
|
|
$(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
$(KDIR)/root.$(1) \
|
|
$(call sysupname,$(1),$(2))
|
|
endef
|
|
|
|
Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
|
|
|
|
define Image/Build/TPLINK-SAFELOADER
|
|
[ -e "$(KDIR)/loader-$(2).elf" ]
|
|
|
|
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
|
|
-B $(5) \
|
|
-k $(KDIR)/loader-$(2).elf \
|
|
-r $(KDIR)/root.$(1) \
|
|
-V $(REVISION) \
|
|
-j \
|
|
-o $(call factoryname,$(1),$(2))
|
|
-$(STAGING_DIR_HOST)/bin/tplink-safeloader \
|
|
-B $(5) \
|
|
-k $(KDIR)/loader-$(2).elf \
|
|
-r $(KDIR)/root.$(1) \
|
|
-V $(REVISION) \
|
|
-j -S \
|
|
-o $(call sysupname,$(1),$(2))
|
|
endef
|
|
|
|
|
|
define Image/Build/CyberTAN
|
|
echo -n '' > $(KDIR_TMP)/empty.bin
|
|
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
|
|
-f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
|
|
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
|
|
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
|
|
-i $(KDIR)/image.tmp \
|
|
-o $(call sysupname,$(1),$(2))
|
|
$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
-x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1)
|
|
-$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
|
|
-i $(KDIR)/image.tmp \
|
|
-o $(call factoryname,$(1),$(2))
|
|
rm $(KDIR)/image.tmp
|
|
endef
|
|
|
|
Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
|
|
Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
|
|
|
|
Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
|
|
|
|
|
|
Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
|
|
|
|
define Image/Build/Netgear/buildkernel
|
|
$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
|
|
-rm -rf $(KDIR_TMP)/$(2)
|
|
mkdir -p $(KDIR_TMP)/$(2)/image
|
|
cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
|
|
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
|
|
$(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
|
|
-noappend -root-owned -be -b 65536
|
|
( \
|
|
cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
|
|
dd if=/dev/zero bs=1k count=1 \
|
|
) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
|
|
mkimage -A mips -O linux -T filesystem -C none -M $(5) \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
|
|
$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
|
|
endef
|
|
|
|
define Image/Build/Netgear
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
|
|
if [ -e $(call sysupname,$(1),$(2)) ]; then \
|
|
for r in $(7) ; do \
|
|
[ -n "$$$$r" ] && dashr="-$$$$r" || dashr= ; \
|
|
$(STAGING_DIR_HOST)/bin/mkdniimg \
|
|
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(call imgname,$(1),$(2))-factory$$$$dashr.img; \
|
|
done; \
|
|
fi
|
|
endef
|
|
|
|
|
|
Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
|
|
Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
|
|
|
|
define Image/Build/NetgearLzma
|
|
$(eval fwsize=$(call mtdpartsize,firmware,$(4)))
|
|
$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
|
|
endef
|
|
|
|
|
|
Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
|
|
|
|
# $(1): (empty)
|
|
# $(2): Board name (small caps)
|
|
# $(3): Kernel board specific cmdline
|
|
# $(4): Kernel mtdparts definition
|
|
# $(5): U-Boot magic
|
|
define Image/Build/NetgearNAND/buildkernel
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(call PatchKernelLzma,$(2),$(3) $(4),-d20)
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
|
|
of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
|
|
bs=$$$$(($(kernelsize)-131072-2*64-1)) \
|
|
count=1 conv=sync
|
|
$(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
|
|
# create a fake rootfs image
|
|
dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
|
|
mkimage -A mips -O linux -T filesystem -C none \
|
|
-a 0xbf070000 -e 0xbf070000 \
|
|
-n 'MIPS OpenWrt fakeroot' \
|
|
-d $(KDIR_TMP)/fakeroot-$(2) \
|
|
-M $(5) \
|
|
$(KDIR_TMP)/fakeroot-$(2).uImage
|
|
# append the fake rootfs image to the kernel, it will reside in the last
|
|
# erase block of the kernel partition
|
|
cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
|
|
endef
|
|
|
|
|
|
# $(1): rootfs image suffix
|
|
# $(2): Board name (small caps)
|
|
# $(3): Kernel board specific cmdline
|
|
# $(4): Kernel mtdparts definition
|
|
# $(5): U-Boot magic
|
|
# $(6): Board name (upper caps)
|
|
# $(7): firmware region code (not used yet)
|
|
# $(8): DNI Hardware version
|
|
# $(9): suffix of the configuration file for ubinize
|
|
define Image/Build/NetgearNAND
|
|
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
|
|
$(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
|
|
$(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
|
|
( \
|
|
dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
|
|
dd if=$(KDIR_TMP)/$(2)-root.ubi \
|
|
) > $(imageraw)
|
|
$(STAGING_DIR_HOST)/bin/mkdniimg \
|
|
-B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
|
|
-i $(imageraw) \
|
|
-o $(call imgname,ubi,$(2))-factory.img
|
|
|
|
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
|
|
endef
|
|
|
|
|
|
ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
|
|
Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
|
|
|
|
define Image/Build/ZyXEL
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
if [ ! -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin ]; then \
|
|
echo "Warning: $(IMG_PREFIX)-$(2)-u-boot.bin not found" >&2; \
|
|
else \
|
|
$(STAGING_DIR_HOST)/bin/mkzynfw \
|
|
-B $(4) \
|
|
-b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \
|
|
-r $(call sysupname,$(1),$(2)):0x10000 \
|
|
-o $(call factoryname,$(1),$(2)); \
|
|
fi; fi
|
|
endef
|
|
endif
|
|
|
|
define Device/NBG6616
|
|
BOARDNAME = NBG6616
|
|
KERNEL_SIZE = 2048k
|
|
IMAGE_SIZE = 15323k
|
|
MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
|
|
CMDLINE += mem=128M
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
|
|
IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
# We cannot currently build a factory image. It is the sysupgrade image
|
|
# prefixed with a header (which is actually written into the MTD device).
|
|
# The header is 2kiB and is filled with 0xff. The format seems to be:
|
|
# 2 bytes: 0x0000
|
|
# 2 bytes: checksum of the data partition (big endian)
|
|
# 4 bytes: length of the contained image file (big endian)
|
|
# 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
|
|
# 2 bytes: 0x0000
|
|
# 2 bytes: checksum over the header partition (big endian)
|
|
# 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
|
|
# rest: 0xff padding
|
|
#
|
|
# The checksums are calculated by adding up all bytes and if a 16bit
|
|
# overflow occurs, one is added and the sum is masked to 16 bit:
|
|
# csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff };
|
|
# Should the file have an odd number of bytes then the byte len-0x800 is
|
|
# used additionally.
|
|
# The checksum for the header is calcualted over the first 2048 bytes with
|
|
# the firmware checksum as the placeholder during calculation.
|
|
#
|
|
# The header is padded with 0xff to the erase block size of the device.
|
|
endef
|
|
|
|
TARGET_DEVICES += NBG6616
|
|
|
|
define Image/Build/ZyXELNAND/buildkernel
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
|
|
$(call MkuImageLzma,$(2),$(3) $(5) $(6))
|
|
mkdir -p $(KDIR_TMP)/$(2)/image/boot
|
|
cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
|
|
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
|
|
--pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \
|
|
-o $(KDIR_TMP)/$(2)-kernel.jffs2 \
|
|
-d $(KDIR_TMP)/$(2)/image \
|
|
2>&1 1>/dev/null | awk '/^.+$$$$/'
|
|
-rm -rf $(KDIR_TMP)/$(2)
|
|
endef
|
|
|
|
define Image/Build/ZyXELNAND
|
|
if [ "$(1)" != "squashfs" ]; then \
|
|
echo Only squashfs is supported; \
|
|
return 0; \
|
|
fi
|
|
$(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
|
|
$(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
|
|
$(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
|
|
$(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
|
|
$(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
|
|
( \
|
|
dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
|
|
dd if=$(KDIR_TMP)/$(2)-root.ubi \
|
|
) > $(imageraw)
|
|
dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
|
|
bs=128k conv=sync
|
|
$(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
|
|
endef
|
|
|
|
|
|
Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
|
|
|
|
define Image/Build/OpenMesh
|
|
-sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
|
|
"$(4)" \
|
|
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
|
|
"$(KDIR_TMP)/vmlinux-$(2).uImage" \
|
|
"$(KDIR)/root.$(1)"
|
|
-sh $(TOPDIR)/scripts/combined-ext-image.sh \
|
|
"$(4)" "$(call factoryname,$(1),$(2))" \
|
|
"$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
|
|
"$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
|
|
"$(KDIR)/root.$(1)" "rootfs"
|
|
endef
|
|
|
|
|
|
Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
|
|
Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
|
|
|
|
define Image/Build/Zcomax
|
|
$(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
$(STAGING_DIR_HOST)/bin/mkzcfw \
|
|
-B $(2) \
|
|
-k $(KDIR_TMP)/vmlinux-$(2).uImage \
|
|
-r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \
|
|
-o $(call imgname,$(1),$(2))-factory.img; \
|
|
fi
|
|
endef
|
|
|
|
|
|
# $(1): template name to be defined, etc. squashfs-only, 64k, 64kraw, etc.
|
|
# $(2): jffs2 blocksize.
|
|
define Jffs2Template
|
|
define Image/Build/Template/$(1)/jffs2-$(2)
|
|
$$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
endef
|
|
|
|
# $(1): template name to be defined.
|
|
# $(2): squashfs suffix to be used.
|
|
# $(3): jffs2 suffix to be used.
|
|
define BuildTemplate
|
|
# $(1) : name of build method.
|
|
# $(2) : board name.
|
|
# $(3) : kernel command line.
|
|
# $(4)~$(8): extra arguments.
|
|
define Image/Build/Template/$(1)/initramfs
|
|
$$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
define Image/Build/Template/$(1)/loader
|
|
$$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
define Image/Build/Template/$(1)/buildkernel
|
|
$$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
define Image/Build/Template/$(1)/squashfs
|
|
$$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
|
|
endef
|
|
$(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs)))))
|
|
endef
|
|
|
|
$(eval $(call BuildTemplate,squashfs-only))
|
|
$(eval $(call BuildTemplate,64k,-64k,64k))
|
|
$(eval $(call BuildTemplate,64kraw,-raw,64k))
|
|
$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
|
|
$(eval $(call BuildTemplate,128k,,128k))
|
|
$(eval $(call BuildTemplate,128kraw,-raw,128k))
|
|
$(eval $(call BuildTemplate,256k,,256k))
|
|
$(eval $(call BuildTemplate,all,,64k 128k 256k))
|
|
|
|
ifeq ($(SUBTARGET),generic)
|
|
$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
|
|
$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
|
|
$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
|
|
|
|
$(eval $(call SingleProfile,AthGzip,64k,AP81,ap81,AP81,ttyS0,115200,$$(ap81_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
|
|
|
|
$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,MR12,mr12,MR12,ttyS0,115200,$$(mr12_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdlayout),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
|
|
$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
|
|
$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))
|
|
|
|
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
|
|
|
|
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
|
|
$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
|
|
$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
|
|
$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
|
|
$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
|
|
$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
|
|
|
|
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
|
|
$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
|
|
$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
|
|
|
|
$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
|
|
|
|
$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
|
|
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
|
|
$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
|
|
|
|
$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
|
|
|
|
$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
|
|
|
|
$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
|
|
|
|
$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
|
|
$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
|
|
$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
|
|
|
|
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,64k))
|
|
$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,64k))
|
|
|
|
$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
|
|
$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
|
|
$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
|
|
|
|
$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage))
|
|
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
|
|
$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
|
|
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
|
|
$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,WNR2200,"" NA,))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
|
|
$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
|
|
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
|
|
$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
|
|
|
|
$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
|
|
$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
|
|
|
|
$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
|
|
$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
|
|
|
|
$(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,65536,16187392))
|
|
$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,65536,16187392))
|
|
|
|
$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,65536,16121856))
|
|
|
|
$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
|
|
|
|
$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
|
|
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
|
|
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
|
|
|
|
$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
|
|
|
|
$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
|
|
$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
|
|
|
|
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
|
|
$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
|
|
|
|
$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
|
|
|
|
$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M AP121_8M))
|
|
$(eval $(call MultiProfile,AP136,AP136_010 AP136_020))
|
|
$(eval $(call MultiProfile,AP143,AP143_8M AP143_16M))
|
|
$(eval $(call MultiProfile,AP147,AP147_010))
|
|
$(eval $(call MultiProfile,AP152,AP152_16M))
|
|
$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3))
|
|
$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M))
|
|
$(eval $(call MultiProfile,OPENMESH,OM2P OM5P MR600 MR900 MR1750))
|
|
$(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY))
|
|
$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M))
|
|
$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R))
|
|
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
|
|
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
|
|
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
|
|
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
|
|
$(eval $(call MultiProfile,WPJ531,WPJ531_16M))
|
|
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
|
|
$(eval $(call MultiProfile,Yun,YUN_16M YUN_8M))
|
|
|
|
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
|
|
$(eval $(call MultiProfile,Madwifi,EAP7660D WP543))
|
|
endif # ifeq ($(SUBTARGET),generic)
|
|
|
|
ifeq ($(SUBTARGET),nand)
|
|
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
|
|
$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
|
|
$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
|
|
|
|
$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
|
|
|
|
$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1))
|
|
endif # ifeq ($(SUBTARGET),nand)
|
|
|
|
|
|
$(eval $(call MultiProfile,Default,$(SINGLE_PROFILES)))
|
|
|
|
define Image/Build/squashfs
|
|
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
|
|
cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
|
|
$(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
|
|
cp $(KDIR)/root.squashfs-64k $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-64k
|
|
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
|
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
|
|
endef
|
|
|
|
define Image/Build/jffs2
|
|
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
|
|
endef
|
|
|
|
define Image/Build/Initramfs
|
|
$(call Image/Build/Profile/$(IMAGE_PROFILE),initramfs)
|
|
endef
|
|
|
|
define Image/Prepare
|
|
gzip -9n -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
|
|
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
gzip -9n -c $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs.bin.gz
|
|
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
|
|
$(call Image/BuildLoader,generic,elf,,,-initramfs)
|
|
endif
|
|
$(call Image/BuildLoader,generic,elf)
|
|
$(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader)
|
|
endef
|
|
|
|
# $(1): filesystem type.
|
|
define Image/Build
|
|
$(call Image/Build/$(call rootfs_type,$(1)),$(1))
|
|
$(call Image/Build/Profile/$(IMAGE_PROFILE),$(1))
|
|
endef
|
|
|
|
$(eval $(call BuildImage))
|