openwrtv4/target/linux/ramips/dts/WT3020-8M.dts
Stanislav Galabov f8b6c9d825 ramips: Change all '/include/' clauses to '#include' so preprocessing can
be done properly for the entire device trees.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
2016-05-10 10:43:17 +02:00

102 lines
1.5 KiB
Text

/dts-v1/;
#include "mt7620n.dtsi"
/ {
compatible = "wt3020", "ralink,mt7620n-soc";
model = "Nexx WT3020";
palmbus@10000000 {
gpio2: gpio@660 {
status = "okay";
};
gpio3: gpio@688 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80", "w25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
ralink,function = "gpio";
};
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "wt3020:blue:power";
gpios = <&gpio3 0 0>;
};
};
};