openwrtv4/target/linux/lantiq/dts/ARV452CQW.dts

/dts-v1/;

/include/ "danube.dtsi"

/ {
	model = "ARV452CQW - Arcor 801";

	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";

		leds {
			boot = &power_blue;
			failsafe = &power_red;
			running = &power_blue;

			internet = &dsl_blue;
			usb = &usb;
			wifi = &wifi;
		};
	};

	memory@0 {
		reg = <0x0 0x2000000>;
	};

	sram@1F000000 {
		vmmc@107000 {
			status = "okay";
			gpios = <&gpio 31 0
				&gpiomm 7 0>;
		};
	};

	fpi@10000000 {
		localbus@0 {
			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x400000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partitions {
					compatible = "fixed-partitions";
					#address-cells = <1>;
					#size-cells = <1>;

					partition@0 {
						label = "uboot";
						reg = <0x00000 0x10000>;
						read-only;
					};

					partition@10000 {
						label = "uboot_env";
						reg = <0x10000 0x10000>;
						read-only;
					};

					partition@20000 {
						label = "firmware";
						reg = <0x20000 0x3d0000>;
					};

					partition@3f0000 {
						label = "boardconfig";
						reg = <0x3f0000 0x10000>;
						read-only;
					};
				};
			};

			mac_addr {
				compatible = "lantiq,eth-mac";
				reg = <0 0x3f0016 0x6>;
				mac-increment = <2>;
			};

			ath5k_eep {
				compatible = "ath5k,eeprom";
				reg = <0 0x3f0400 0x1000>;
				ath,mac-offset = <0>;
				ath,eep-swap;
			};
			gpiomm: gpiomm@4000000 {
				compatible = "lantiq,gpio-mm";
				reg = <1 0x0 0x10>;
				#address-cells = <1>;
				#size-cells = <1>;
				#gpio-cells = <2>;
				gpio-controller;
				lantiq,shadow = <0x77f>;
			};
		};

		gpio: pinmux@E100B10 {
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			state_default: pinmux {
				ebu {
					lantiq,groups = "ebu cs1";
					lantiq,function = "ebu";
				};
				pci_in {
					lantiq,groups = "req1";
					lantiq,function = "pci";
					lantiq,open-drain = <1>;
					lantiq,pull = <2>;
					lantiq,output = <0>;
				};
				pci_out {
					lantiq,groups = "gnt1";
					lantiq,function = "pci";
					lantiq,output = <1>;
				};
				pci_rst {
					lantiq,pins = "io21";
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
				leds {
					lantiq,pins = "io3", "io5", "io6", "io7", "io9";
					lantiq,output = <1>;
				};
			};
		};

		ifxhcd@E101000 {
			status = "okay";
			gpios = <&gpio 28 0>;
		};

		etop@E180000 {
			phy-mode = "rmii";
		};

		pci@E105400 {
			status = "okay";
			lantiq,external-clock;
			gpio-reset = <&gpio 21 0>;
		};

	};

/*
#define ARV452CPW_SWITCH_RESET          110
*/
	gpio-keys-polled {
		compatible = "gpio-keys-polled1";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		wps {
			label = "wps";
			gpios = <&gpio 11 1>;
			linux,code = <0x101>;
		};
		restart {
			label = "restart";
			gpios = <&gpio 12 1>;
			linux,code = <0x110>;
		};
		reset {
			label = "reset";
			gpios = <&gpio 28 1>;
			linux,code = <0x198>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		power_blue: power0 {
			label = "arv452cqw:blue:power";
			gpios = <&gpio 3 1>;
			default-state = "keep";
		};
		dsl_blue: dsl {
			label = "arv452cqw:blue:dsl";
			gpios = <&gpio 4 1>;
		};
		isdn {
			label = "arv452cqw:blue:isdn";
			gpios = <&gpio 5 1>;
		};
		power_red: power1 {
			label = "arv452cqw:red:power";
			gpios = <&gpio 6 1>;
		};
		wps {
			label = "arv452cqw:blue:wps";
			gpios = <&gpio 7 1>;
		};
		wps1 {
			label = "arv452cqw:yellow:wps";
			gpios = <&gpio 9 1>;
		};
		fxs1 {
			label = "arv452cqw:blue:telefon1";
			gpios = <&gpiomm 0 1>;
		};
		fxs2 {
			label = "arv452cqw:blue:telefon2";
			gpios = <&gpiomm 1 1>;
		};
		wps2 {
			label = "arv452cqw:red:wps";
			gpios = <&gpiomm 2 1>;
		};
		fxo {
			label = "arv452cqw:blue:line";
			gpios = <&gpiomm 3 1>;
		};
		voice {
			label = "arv452cqw:blue:sprache";
			gpios = <&gpiomm 4  1>;
		};
		usb: usb {
			label = "arv452cqw:blue:usb";
			gpios = <&gpiomm 5 1>;
		};
		wifi: wifi {
			label = "arv452cqw:blue:wlan";
			gpios = <&gpiomm 6 1>;
		};
		/*
			internet blue and internet red are missing
			dsl2 and dsl3 are not referenced in manual
		*/
		dsl2 {
			label = "arv452cqw:yellow:dsl";
			gpios = <&gpiomm 8 1>;
		};
		dsl3 {
			label = "arv452cqw:red:dsl";
			gpios = <&gpiomm 9 1>;
		};
	};
};