Alex Maclean f683385e73 ramips: add support for TP-Link RE350 ... The TP-Link RE350 is a wall-wart AC1200 range extender/access point with a single gigabit ethernet port and two non-detachable antennas, based on the MT7621A SoC with MT7603E and MT7612E radios. Firmware wise it is very similar to the QCA based RE450. SoC: MediaTek MT7621A (880MHz) Flash: 8MiB (Winbond W25Q64) RAM: 64MiB (DDR2) Ethernet: 1x 1Gbit Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E) LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act (green) Buttons: On/off, LED, reset, WPS Serial header at J1, 57600 8n1: Pin 1 TX Pin 2 RX Pin 3 GND Pin 4 3.3V Factory image can be uploaded directly through the stock UI. Signed-off-by: Alex Maclean <monkeh@monkeh.net>		2017-07-25 21:02:53 +02:00
..
imagebuilder	imagebuilder: don't rewrite package list output	2017-06-17 01:24:43 +02:00
linux	ramips: add support for TP-Link RE350	2017-07-25 21:02:53 +02:00
sdk	build: get rid of host.mk	2017-02-26 13:31:44 +01:00
toolchain	build: get rid of host.mk	2017-02-26 13:31:44 +01:00
Config.in	kernel: allow selecting RTC drivers on targets without explicit RTC support	2017-05-02 14:33:58 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00