KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix 
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

189 lines
6.2 KiB
Diff
Raw Blame History

From 98629f09f3ceb7f2a559b48b4a70028485583f5e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
Date: Tue, 1 Nov 2016 15:15:41 +0100
Subject: [PATCH] i2c: bcm2835: Add debug support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
This adds a debug module parameter to aid in debugging transfer issues
by printing info to the kernel log. When enabled, status values are
collected in the interrupt routine and msg info in
bcm2835_i2c_start_transfer(). This is done in a way that tries to avoid
affecting timing. Having printk in the isr can mask issues.
debug values (additive):
1: Print info on error
2: Print info on all transfers
3: Print messages before transfer is started
The value can be changed at runtime:
/sys/module/i2c_bcm2835/parameters/debug
Example output, debug=3:
[ 747.114448] bcm2835_i2c_xfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1]
[ 747.114463] bcm2835_i2c_xfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1]
[ 747.117809] start_transfer: msg(1/2) write addr=0x54, len=2 flags= [i2c1]
[ 747.117825] isr: remain=2, status=0x30000055 : TA TXW TXD TXE [i2c1]
[ 747.117839] start_transfer: msg(2/2) read addr=0x54, len=32 flags= [i2c1]
[ 747.117849] isr: remain=32, status=0xd0000039 : TA RXR TXD RXD [i2c1]
[ 747.117861] isr: remain=20, status=0xd0000039 : TA RXR TXD RXD [i2c1]
[ 747.117870] isr: remain=8, status=0x32 : DONE TXD RXD [i2c1]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
---
drivers/i2c/busses/i2c-bcm2835.c | 99 +++++++++++++++++++++++++++++++++++++++-
1 file changed, 98 insertions(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -53,6 +53,18 @@
#define BCM2835_I2C_CDIV_MIN 0x0002
#define BCM2835_I2C_CDIV_MAX 0xFFFE
+static unsigned int debug;
+module_param(debug, uint, 0644);
+MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer");
+
+#define BCM2835_DEBUG_MAX 512
+struct bcm2835_debug {
+ struct i2c_msg *msg;
+ int msg_idx;
+ size_t remain;
+ u32 status;
+};
+
struct bcm2835_i2c_dev {
struct device *dev;
void __iomem *regs;
@@ -66,8 +78,78 @@ struct bcm2835_i2c_dev {
u32 msg_err;
u8 *msg_buf;
size_t msg_buf_remaining;
+ struct bcm2835_debug debug[BCM2835_DEBUG_MAX];
+ unsigned int debug_num;
+ unsigned int debug_num_msgs;
};
+static inline void bcm2835_debug_add(struct bcm2835_i2c_dev *i2c_dev, u32 s)
+{
+ if (!i2c_dev->debug_num_msgs || i2c_dev->debug_num >= BCM2835_DEBUG_MAX)
+ return;
+
+ i2c_dev->debug[i2c_dev->debug_num].msg = i2c_dev->curr_msg;
+ i2c_dev->debug[i2c_dev->debug_num].msg_idx =
+ i2c_dev->debug_num_msgs - i2c_dev->num_msgs;
+ i2c_dev->debug[i2c_dev->debug_num].remain = i2c_dev->msg_buf_remaining;
+ i2c_dev->debug[i2c_dev->debug_num].status = s;
+ i2c_dev->debug_num++;
+}
+
+static void bcm2835_debug_print_status(struct bcm2835_i2c_dev *i2c_dev,
+ struct bcm2835_debug *d)
+{
+ u32 s = d->status;
+
+ pr_info("isr: remain=%zu, status=0x%x : %s%s%s%s%s%s%s%s%s%s [i2c%d]\n",
+ d->remain, s,
+ s & BCM2835_I2C_S_TA ? "TA " : "",
+ s & BCM2835_I2C_S_DONE ? "DONE " : "",
+ s & BCM2835_I2C_S_TXW ? "TXW " : "",
+ s & BCM2835_I2C_S_RXR ? "RXR " : "",
+ s & BCM2835_I2C_S_TXD ? "TXD " : "",
+ s & BCM2835_I2C_S_RXD ? "RXD " : "",
+ s & BCM2835_I2C_S_TXE ? "TXE " : "",
+ s & BCM2835_I2C_S_RXF ? "RXF " : "",
+ s & BCM2835_I2C_S_ERR ? "ERR " : "",
+ s & BCM2835_I2C_S_CLKT ? "CLKT " : "",
+ i2c_dev->adapter.nr);
+}
+
+static void bcm2835_debug_print_msg(struct bcm2835_i2c_dev *i2c_dev,
+ struct i2c_msg *msg, int i, int total,
+ const char *fname)
+{
+ pr_info("%s: msg(%d/%d) %s addr=0x%02x, len=%u flags=%s%s%s%s%s%s%s [i2c%d]\n",
+ fname, i, total,
+ msg->flags & I2C_M_RD ? "read" : "write", msg->addr, msg->len,
+ msg->flags & I2C_M_TEN ? "TEN" : "",
+ msg->flags & I2C_M_RECV_LEN ? "RECV_LEN" : "",
+ msg->flags & I2C_M_NO_RD_ACK ? "NO_RD_ACK" : "",
+ msg->flags & I2C_M_IGNORE_NAK ? "IGNORE_NAK" : "",
+ msg->flags & I2C_M_REV_DIR_ADDR ? "REV_DIR_ADDR" : "",
+ msg->flags & I2C_M_NOSTART ? "NOSTART" : "",
+ msg->flags & I2C_M_STOP ? "STOP" : "",
+ i2c_dev->adapter.nr);
+}
+
+static void bcm2835_debug_print(struct bcm2835_i2c_dev *i2c_dev)
+{
+ struct bcm2835_debug *d;
+ unsigned int i;
+
+ for (i = 0; i < i2c_dev->debug_num; i++) {
+ d = &i2c_dev->debug[i];
+ if (d->status == ~0)
+ bcm2835_debug_print_msg(i2c_dev, d->msg, d->msg_idx,
+ i2c_dev->debug_num_msgs, "start_transfer");
+ else
+ bcm2835_debug_print_status(i2c_dev, d);
+ }
+ if (i2c_dev->debug_num >= BCM2835_DEBUG_MAX)
+ pr_info("BCM2835_DEBUG_MAX reached\n");
+}
+
static inline void bcm2835_i2c_writel(struct bcm2835_i2c_dev *i2c_dev,
u32 reg, u32 val)
{
@@ -170,6 +252,7 @@ static void bcm2835_i2c_start_transfer(s
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_A, msg->addr);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DLEN, msg->len);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, c);
+ bcm2835_debug_add(i2c_dev, ~0);
}
/*
@@ -187,6 +270,7 @@ static irqreturn_t bcm2835_i2c_isr(int t
u32 val, err;
val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
+ bcm2835_debug_add(i2c_dev, val);
err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR);
if (err) {
@@ -251,6 +335,13 @@ static int bcm2835_i2c_xfer(struct i2c_a
unsigned long time_left;
int i, ret;
+ if (debug)
+ i2c_dev->debug_num_msgs = num;
+
+ if (debug > 2)
+ for (i = 0; i < num; i++)
+ bcm2835_debug_print_msg(i2c_dev, &msgs[i], i + 1, num, __func__);
+
for (i = 0; i < (num - 1); i++)
if (msgs[i].flags & I2C_M_RD) {
dev_warn_once(i2c_dev->dev,
@@ -270,6 +361,10 @@ static int bcm2835_i2c_xfer(struct i2c_a
time_left = wait_for_completion_timeout(&i2c_dev->completion,
adap->timeout);
+ if (debug > 1 || (debug && (!time_left || i2c_dev->msg_err)))
+ bcm2835_debug_print(i2c_dev);
+ i2c_dev->debug_num_msgs = 0;
+ i2c_dev->debug_num = 0;
if (!time_left) {
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C,
BCM2835_I2C_C_CLEAR);
@@ -280,7 +375,9 @@ static int bcm2835_i2c_xfer(struct i2c_a
if (!i2c_dev->msg_err)
return num;
- dev_dbg(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
+ if (debug)
+ dev_err(i2c_dev->dev, "i2c transfer failed: %x\n",
+ i2c_dev->msg_err);
if (i2c_dev->msg_err & BCM2835_I2C_S_ERR)
return -EREMOTEIO;
Reference in a new issue View git blame Copy permalink