011f2c26f1
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
48 lines
1.8 KiB
Diff
48 lines
1.8 KiB
Diff
From 1bb11b1cfccb209ca841878ec650538e972a34ab Mon Sep 17 00:00:00 2001
|
|
From: Simon Maes <simonn.maes@gmail.com>
|
|
Date: Mon, 29 Aug 2016 21:11:01 +0200
|
|
Subject: [PATCH] Fixes i2c_bcm2708: Write to FIFO correctly - v2 (#1574)
|
|
|
|
* i2c: fix i2c_bcm2708: Clear FIFO before sending data
|
|
|
|
Make sure FIFO gets cleared before trying to send
|
|
data in case of a repeated start (COMBINED=Y).
|
|
|
|
* i2c: fix i2c_bcm2708: Only write to FIFO when not full
|
|
|
|
Check if FIFO can accept data before writing.
|
|
To avoid a peripheral read on the last iteration of a loop,
|
|
both bcm2708_bsc_fifo_fill and ~drain are changed as well.
|
|
---
|
|
drivers/i2c/busses/i2c-bcm2708.c | 8 ++++++--
|
|
1 file changed, 6 insertions(+), 2 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-bcm2708.c
|
|
+++ b/drivers/i2c/busses/i2c-bcm2708.c
|
|
@@ -115,13 +115,13 @@ static inline void bcm2708_bsc_reset(str
|
|
|
|
static inline void bcm2708_bsc_fifo_drain(struct bcm2708_i2c *bi)
|
|
{
|
|
- while ((bcm2708_rd(bi, BSC_S) & BSC_S_RXD) && (bi->pos < bi->msg->len))
|
|
+ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_RXD))
|
|
bi->msg->buf[bi->pos++] = bcm2708_rd(bi, BSC_FIFO);
|
|
}
|
|
|
|
static inline void bcm2708_bsc_fifo_fill(struct bcm2708_i2c *bi)
|
|
{
|
|
- while ((bcm2708_rd(bi, BSC_S) & BSC_S_TXD) && (bi->pos < bi->msg->len))
|
|
+ while ((bi->pos < bi->msg->len) && (bcm2708_rd(bi, BSC_S) & BSC_S_TXD))
|
|
bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
|
|
}
|
|
|
|
@@ -155,6 +155,10 @@ static inline int bcm2708_bsc_setup(stru
|
|
if ( (bi->nmsgs > 1) &&
|
|
!(bi->msg[0].flags & I2C_M_RD) && (bi->msg[1].flags & I2C_M_RD) &&
|
|
(bi->msg[0].addr == bi->msg[1].addr) && (bi->msg[0].len <= 16)) {
|
|
+
|
|
+ /* Clear FIFO */
|
|
+ bcm2708_wr(bi, BSC_C, BSC_C_CLEAR_1);
|
|
+
|
|
/* Fill FIFO with entire write message (16 byte FIFO) */
|
|
while (bi->pos < bi->msg->len) {
|
|
bcm2708_wr(bi, BSC_FIFO, bi->msg->buf[bi->pos++]);
|