openwrtv4/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-br6524n.c
John Crispin f2f9332350 adds support for Edimax BR-6524N
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
2013-01-06 11:11:42 +00:00

74 lines
1.9 KiB
C

/*
* Edimax BR6524N board support
*
* Copyright (C) 2012 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt288x.h>
#include <asm/mach-ralink/rt288x_regs.h>
#include <asm/mach-ralink/ramips_eth_platform.h>
#include "devices.h"
#define BR6524N_GPIO_STATUS_LED 12
#define BR6524N_GPIO_BUTTON_WPS 0
#define BR6524N_KEYS_POLL_INTERVAL 20
#define BR6524N_KEYS_DEBOUNCE_INTERVAL (3 * BR6524N_KEYS_POLL_INTERVAL)
static struct gpio_led br6524n_leds_gpio[] __initdata = {
{
.name = "br6524n:green:status",
.gpio = BR6524N_GPIO_STATUS_LED,
.active_low = 1,
}
};
static struct gpio_keys_button br6524n_gpio_buttons[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = BR6524N_KEYS_DEBOUNCE_INTERVAL,
.gpio = BR6524N_GPIO_BUTTON_WPS,
}
};
static void __init br6524n_fe_init(void)
{
rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
rt288x_register_flash(0);
ramips_register_gpio_leds(-1, ARRAY_SIZE(br6524n_leds_gpio),
br6524n_leds_gpio);
ramips_register_gpio_buttons(-1, BR6524N_KEYS_POLL_INTERVAL,
ARRAY_SIZE(br6524n_gpio_buttons),
br6524n_gpio_buttons);
rt288x_register_wifi();
/* Board is connected to an IC+ IP175C Fast Ethernet switch */
rt288x_eth_data.speed = SPEED_100;
rt288x_eth_data.duplex = DUPLEX_FULL;
rt288x_eth_data.tx_fc = 1;
rt288x_eth_data.rx_fc = 1;
rt288x_eth_data.phy_mask = BIT(0);
rt288x_register_ethernet();
rt288x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_BR6524N, "BR6524N", "Edimax BR6524N", br6524n_fe_init);