openwrtv4/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch
Hauke Mehrtens fa137d51f5 ar71xx: add Arduino Yun
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83

The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.

Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47451
2015-11-10 23:13:09 +00:00

42 lines
1.5 KiB
Diff

--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -76,6 +76,19 @@ config ATH79_MACH_ANTMINER_S3
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_ARDUINO_YUN
+ bool "Arduino Yun"
+ select SOC_AR933X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ help
+ Say 'Y' here if you want your kernel to support the
+ Arduino Yun.
+
config ATH79_MACH_AP113
bool "Atheros AP113 board support"
select SOC_AR724X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -23,6 +23,7 @@ enum ath79_mach_type {
ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
ATH79_MACH_ANTMINER_S1, /* Antminer S1 */
ATH79_MACH_ANTMINER_S3, /* Antminer S3 */
+ ATH79_MACH_ARDUINO_YUN, /* Yun */
ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mac
obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
+obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o