75 lines
2 KiB
Diff
75 lines
2 KiB
Diff
From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001
|
|
From: Chen-Yu Tsai <wens@csie.org>
|
|
Date: Thu, 26 Dec 2013 17:15:47 +0800
|
|
Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS
|
|
|
|
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The
|
|
Bluetooth part is a BCM20710 IC connected to UART2 in the A20
|
|
SoC. The IC also takes a 32.768 KHz low power clock input, a power
|
|
enable signal and a wake signal via GPIO.
|
|
|
|
The Bluetooth module supports out-of-band interrupt signaling via
|
|
GPIO, but this is not supported in this patch.
|
|
---
|
|
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++
|
|
1 file changed, 36 insertions(+)
|
|
|
|
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
|
|
index f9ab5d4..69d8c4c 100644
|
|
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
|
|
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
|
|
@@ -103,6 +103,20 @@
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
+
|
|
+ bt_pwr_pin: bt_pwr_pin@0 {
|
|
+ allwinner,pins = "PH18";
|
|
+ allwinner,function = "gpio_out";
|
|
+ allwinner,drive = <0>;
|
|
+ allwinner,pull = <0>;
|
|
+ };
|
|
+
|
|
+ bt_wake_pin: bt_wake_pin@0 {
|
|
+ allwinner,pins = "PH24";
|
|
+ allwinner,function = "gpio_out";
|
|
+ allwinner,drive = <0>;
|
|
+ allwinner,pull = <0>;
|
|
+ };
|
|
};
|
|
|
|
pwm: pwm@01c20e00 {
|
|
@@ -123,6 +137,12 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+ uart2: serial@01c28800 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart2_pins_a>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
i2c0: i2c@01c2ac00 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins_a>;
|
|
@@ -214,4 +234,20 @@
|
|
enable-active-high;
|
|
gpio = <&pio 7 9 0>;
|
|
};
|
|
+
|
|
+ rfkill-switches {
|
|
+ compatible = "simple-bus";
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ rfkill_bt {
|
|
+ compatible = "rfkill-gpio";
|
|
+ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>;
|
|
+ rfkill-name = "bt";
|
|
+ rfkill-type = <2>;
|
|
+ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */
|
|
+ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */
|
|
+ clocks = <&clk_out_a>;
|
|
+ clock-frequency = <32768>;
|
|
+ };
|
|
+ };
|
|
};
|