openwrtv4/target/linux/lantiq/dts/ARV452CQW.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

236 lines
4.5 KiB
Text

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "ARV452CQW - Arcor 801";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_blue;
led-failsafe = &power_red;
led-running = &power_blue;
led-internet = &dsl_blue;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH
&gpiomm 7 GPIO_ACTIVE_HIGH>;
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x400000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
ath5k_eep {
compatible = "ath5k,eeprom";
ath,eep-flash = <&boardconfig 0x400>;
ath,mac-offset = <0x0>;
ath,eep-swap;
};
gpiomm: gpiomm@4000000 {
compatible = "lantiq,gpio-mm";
reg = <1 0x0 0x10>;
#address-cells = <1>;
#size-cells = <1>;
#gpio-cells = <2>;
gpio-controller;
lantiq,shadow = <0x77f>;
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,open-drain = <1>;
lantiq,pull = <2>;
lantiq,output = <0>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
leds {
lantiq,pins = "io3", "io5", "io6", "io7", "io9";
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
};
etop@E180000 {
phy-mode = "rmii";
mtd-mac-address = <&boardconfig 0x16>;
};
pci@E105400 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
};
};
/*
#define ARV452CPW_SWITCH_RESET 110
*/
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_blue: power0 {
label = "arv452cqw:blue:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
dsl_blue: dsl {
label = "arv452cqw:blue:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
isdn {
label = "arv452cqw:blue:isdn";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
power_red: power1 {
label = "arv452cqw:red:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv452cqw:blue:wps";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wps1 {
label = "arv452cqw:yellow:wps";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv452cqw:blue:telefon1";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv452cqw:blue:telefon2";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv452cqw:red:wps";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv452cqw:blue:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
voice {
label = "arv452cqw:blue:sprache";
gpios = <&gpiomm 4 1>;
};
usb: usb {
label = "arv452cqw:blue:usb";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv452cqw:blue:wlan";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
/*
internet blue and internet red are missing
dsl2 and dsl3 are not referenced in manual
*/
dsl2 {
label = "arv452cqw:yellow:dsl";
gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>;
};
dsl3 {
label = "arv452cqw:red:dsl";
gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
};
};
};