openwrtv4/target/linux/ramips/dts/HC5861.dts
L. D. Pinney 70b192f573 ramips: update device tree source files
Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-03 19:37:40 +02:00

92 lines
1.5 KiB
Text

/dts-v1/;
#include "HC5X61.dtsi"
/ {
compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
model = "HiWiFi HC5861";
gpio-leds {
compatible = "gpio-leds";
system {
label = "hc5861:blue:system";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "hc5861:blue:wlan2g";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
internet {
label = "hc5861:blue:internet";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "hc5861:blue:wlan5g";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
turbo {
label = "hc5861:blue:turbo";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <0>;
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
};
sdpower {
gpio-export,name = "sdpower";
gpio-export,output = <0>;
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
};
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
mediatek,portmap = "wllll";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4 = "gmac";
};