Chuanhong Guo ed40173dfc ramips: Add support for Phicomm K2G ... Specification: - SoC: MediaTek MT7620A - Flash: 8 MB - RAM: 64 MB - Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5) - Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped with external PA. - UART: 1 x UART on PCB - 57600 8N1 Flash instruction: The U-boot is based on Ralink SDK so we can flash the firmware using UART: 1. Configure PC with a static IP address and setup an TFTP server. 2. Put the firmware into the tftp directory. 3. Connect the UART line as described on the PCB. 4. Power up the device and press 2, follow the instruction to set device and tftp server IP address and input the firmware file name. U-boot will then load the firmware and write it into the flash. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>		2018-06-21 22:00:02 +02:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
Makefile	ramips: Add lzma-loader targets	2018-06-21 06:54:42 +02:00
mt76x8.mk	ramips: add support for TP-Link TL-WR842N v5	2018-06-16 10:08:51 +02:00
mt7620.mk	ramips: Add support for Phicomm K2G	2018-06-21 22:00:02 +02:00
mt7621.mk	ramips: Add support for Mikrotik RouterBOARD RBM33g	2018-06-21 06:54:42 +02:00
rt288x.mk
rt305x-legacy.mk
rt305x.mk
rt3883.mk