openwrtv4/target/linux/ramips/image
Alex Maclean f683385e73 ramips: add support for TP-Link RE350
The TP-Link RE350 is a wall-wart AC1200 range extender/access point with
a single gigabit ethernet port and two non-detachable antennas, based on
the MT7621A SoC with MT7603E and MT7612E radios.

Firmware wise it is very similar to the QCA based RE450.

SoC: MediaTek MT7621A (880MHz)
Flash: 8MiB (Winbond W25Q64)
RAM:   64MiB (DDR2)
Ethernet: 1x 1Gbit
Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E)
LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act
(green)
Buttons: On/off, LED, reset, WPS

Serial header at J1, 57600 8n1:
Pin 1 TX
Pin 2 RX
Pin 3 GND
Pin 4 3.3V

Factory image can be uploaded directly through the stock UI.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2017-07-25 21:02:53 +02:00
..
lzma-loader ramips: lzma-loader: fix O32 ABI conformance 2016-03-21 13:15:29 +00:00
Makefile ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x) 2017-02-02 00:13:49 +01:00
mt7620.mk ramips: image: simplify TP-Link Archer devices definitions 2017-06-29 10:37:36 +02:00
mt7621.mk ramips: add support for TP-Link RE350 2017-07-25 21:02:53 +02:00
mt7628.mk ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13 2017-06-29 10:37:36 +02:00
mt7688.mk ramips: Added Onion Omega2 and Omega2+ 2017-01-15 17:43:14 +01:00
rt288x.mk ramips: fix AR670W partition alignment 2017-02-09 09:14:45 +01:00
rt305x-legacy.mk ramips: use new image build code for more devices 2016-12-24 10:03:38 +01:00
rt305x.mk ramips: add support for TRENDnet TEW-638APB V2 2017-06-17 15:38:19 +02:00
rt3883.mk ramips: really drop the rt-n56u factory image 2017-04-13 19:22:23 +02:00