KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux
History
Jonas Gorski ecdce239a5 brcm63xx: ensure dummy byte is set for mapped spi flash with fast read 
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46707
2015-08-23 09:35:56 +00:00
..
adm5120 adm5120: do not config something as module 2015-07-14 20:52:18 +00:00
adm8668 build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
ar7 ar7: add linux 4.1 support 2015-07-05 21:32:44 +00:00
ar71xx ar71xx: add support for TP-Link TL-WDR6500 v2 2015-08-17 06:24:04 +00:00
arm64 arm64: use common image prefix 2015-05-27 14:57:38 +00:00
at91 at91: fix usb rate backport patch tab mangle 2015-08-17 16:10:49 +00:00
ath25 build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
au1000 image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
bcm53xx kernel: move linux, part-probe dt parsing in generic code 2015-08-17 06:17:37 +00:00
brcm47xx kernel: update 4.1 to 4.1.5 2015-08-14 13:06:33 +00:00
brcm63xx brcm63xx: ensure dummy byte is set for mapped spi flash with fast read 2015-08-23 09:35:56 +00:00
brcm2708 brcm2708: override disabled device tree module status from config.txt 2015-08-17 06:04:48 +00:00
cns3xxx kernel: update 3.18 to 3.18.17 2015-06-30 23:26:09 +00:00
gemini kernel: refresh patches for 4.1 2015-07-22 12:51:11 +00:00
generic Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1). 2015-08-21 08:09:52 +00:00
imx6 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
ipq806x ipq806x: switch AP148 to using SMEM based MTD parser 2015-08-17 06:18:15 +00:00
ixp4xx kernel: update 4.1 to 4.1.5 2015-08-14 13:06:33 +00:00
kirkwood kirkwood: add wpad-mini to router profiles 2015-08-05 13:56:02 +00:00
lantiq lantiq: Support newer versions of the PEF7071 ethernet PHYs 2015-08-17 11:25:57 +00:00
malta build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
mcs814x mcs814x: use firmware partition splitter on dLAN USB Extender 2015-08-17 06:16:19 +00:00
mpc85xx mpc85xx: Enable RFKill and USB Power GPIO Control for WDR4900v1 2015-07-09 06:56:45 +00:00
mvebu This had been set in r44508 as a workaround for switch problems. 2015-08-21 08:10:48 +00:00
mxs kernel: update 4.1 to 4.1.4 2015-08-05 13:55:14 +00:00
netlogic netlogic: copy initramfs image to $(BIN_DIR) 2015-04-23 22:31:36 +00:00
octeon octeon: fix imagebuilder 2015-05-29 11:28:20 +00:00
omap omap: use common image prefix 2015-05-27 15:34:30 +00:00
omap24xx omap24xx: Add basic config for linux-4.0 2015-03-19 18:45:32 +00:00
orion orion: remove IRQF_DISABLED 2015-08-17 11:26:14 +00:00
oxnas oxnas: remove support for kernel 3.18 and 4.0 2015-08-17 11:25:46 +00:00
ppc40x ppc40x: upgrade to 3.18 2015-04-12 20:48:13 +00:00
ppc44x image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
pxa kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED 2015-03-06 07:56:34 +00:00
ramips ramips: move patches around 2015-08-17 10:13:46 +00:00
rb532 kernel: update 3.18 to 3.18.14 2015-05-21 19:32:46 +00:00
realview realview: use common image prefix 2015-05-27 15:34:38 +00:00
sunxi sunxi: bump to 4.1 2015-08-21 13:23:29 +00:00
uml uml: remove linux 3.14 support 2015-03-28 13:20:52 +00:00
x86 kernel: remove kmod-crypto-aes, AES crypto support is always built into the kernel 2015-07-24 15:36:08 +00:00
xburst image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
Makefile