openwrtv4/target/linux
John Crispin ebcce35be4 ar71xx: Use PHY fixups for Open Mesh MR900
The delays of PHY/MAC on the MR900 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.

This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.

Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49030
2016-03-16 09:27:11 +00:00
..
adm5120 adm5120: disable the openwrt commandline hack 2015-08-30 12:17:54 +00:00
adm8668 base-files: remove default /etc/config/network, generate it via board.d instead 2016-01-25 16:30:41 +00:00
ar7 all: drop old uci-defaults.sh 2015-12-11 15:26:06 +00:00
ar71xx ar71xx: Use PHY fixups for Open Mesh MR900 2016-03-16 09:27:11 +00:00
arc770 base-files: remove default /etc/config/network, generate it via board.d instead 2016-01-25 16:30:41 +00:00
archs38 archs38: remove network config override 2016-02-18 08:35:21 +00:00
arm64 kernel: disable bogus DEVTMPFS config overrides 2016-01-17 10:40:36 +00:00
at91 at91: udc driver was missing deps 2016-02-16 16:25:16 +00:00
ath25 all: drop old uci-defaults.sh 2015-12-11 15:26:06 +00:00
au1000 image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
bcm53xx bcm53xx: update bcm47xx_sprom to the latest 4.6 queued version 2016-03-08 11:05:10 +00:00
brcm47xx brcm47xx: image: create standard TRX images using new building system 2016-03-11 21:31:34 +00:00
brcm63xx brcm63xx: fix BCM3368 interrupt controller addresses 2016-03-10 19:10:58 +00:00
brcm2708 brcmfmac: Add Raspberry Pi 3 support 2016-03-16 09:26:42 +00:00
cns3xxx cns3xxx: enable CONFIG_PROC_STRIPPED to improve network performance 2016-01-31 12:35:33 +00:00
gemini kernel: refresh patches for 4.1 2015-07-22 12:51:11 +00:00
generic kernel: backport bcma 4.6 changes for flashes 2016-03-07 23:09:26 +00:00
imx6 imx6: image: Add missing kernel prefix 2016-03-04 08:33:20 +00:00
ipq806x kernel: update kernel 3.18 to 3.18.26 2016-01-25 21:43:26 +00:00
ixp4xx ixp4xx: fix initramfs builds 2016-01-31 00:54:53 +00:00
kirkwood kirkwood: refresh patches 2016-03-14 17:13:22 +00:00
lantiq lantiq: print profile name in dsl lucistat 2016-03-07 11:03:44 +00:00
malta kernel: add missing config options 2016-03-05 16:22:45 +00:00
mcs814x all: drop old uci-defaults.sh 2015-12-11 15:26:06 +00:00
mediatek base-files: remove default /etc/config/network, generate it via board.d instead 2016-01-25 16:30:41 +00:00
mpc85xx target/mpc85xx: check for 'generic' subtarget for initramfs image file 2016-03-03 20:24:41 +00:00
mvebu mvebu: add SolidRun ClearFog A1 support 2016-02-17 17:49:26 +00:00
mxs kernel: update kernel 4.4 to version 4.4.4 2016-03-05 17:51:37 +00:00
netlogic base-files: remove default /etc/config/network, generate it via board.d instead 2016-01-25 16:30:41 +00:00
octeon octeon: get rid of /lib/functions/octeon.sh hackery, use sysinfo directly 2016-01-29 23:19:41 +00:00
omap kernel: disable bogus DEVTMPFS config overrides 2016-01-17 10:40:36 +00:00
omap24xx omap24xx: Append dtb to the zImage 2015-10-09 07:46:12 +00:00
orion all: drop old uci-defaults.sh 2015-12-11 15:26:06 +00:00
oxnas oxnas: complete NAND driver clean-up 2016-03-10 21:19:58 +00:00
ppc40x ppc40x: upgrade to 3.18 2015-04-12 20:48:13 +00:00
ppc44x image: fix jffs2(_nand) image generation 2015-08-05 13:55:52 +00:00
ramips ramips: Add support for Xiaomi MiWiFi Nano 2016-03-16 09:26:48 +00:00
rb532 rb532: switch to 4.1 2015-12-23 14:43:11 +00:00
realview all: drop old uci-defaults.sh 2015-12-11 15:26:06 +00:00
sunxi kernel: update kernel 3.18 to version 3.18.27 2016-03-01 23:16:17 +00:00
uml kernel: update kernel 4.4 to version 4.4.4 2016-03-05 17:51:37 +00:00
x86 kernel: add missing config options 2016-03-05 16:22:45 +00:00
xburst kernel: update kernel 3.18 to version 3.18.23 2015-11-01 13:45:57 +00:00
zynq kernel: update kernel 4.4 to version 4.4.3 2016-02-25 21:54:39 +00:00
Makefile