Piotr Dymacz eb9ba2b91e ar71xx: add support for YunCore CPE870 ... YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341. Short specification: - 535/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm - internal 14 dBi panel antenna - 8x LED, 1x button - UART (JP1) header on PCB Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. setenv bootcmd "bootm 0x9f020000" 5. saveenv && reset Vendor firmware access (login/password): Admin/5up Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-11-21 10:05:40 +01:00
..
base-files	ar71xx: add support for YunCore CPE870	2016-11-21 10:05:40 +01:00
files	ar71xx: add support for YunCore CPE870	2016-11-21 10:05:40 +01:00
generic	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
image	ar71xx: add support for YunCore CPE870	2016-11-21 10:05:40 +01:00
mikrotik	ar71xx: add support for TP-Link WR802N v1	2016-10-26 12:37:45 +02:00
nand	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
patches-4.4	ar71xx: enable serial console on mikrotik devices	2016-11-18 09:41:14 +01:00
config-4.4	ar71xx: add support for YunCore CPE870	2016-11-21 10:05:40 +01:00
Makefile	use immediate set in target Makefiles	2016-09-10 15:30:38 +02:00
modules.mk	ar71xx: add LED driver NU801	2015-12-11 15:04:57 +00:00