openwrtv4/include/target.mk
Damir Samardzic 2534141322 mvebu: add support for MACCHIATObin (cortex-a72)
Add initial support for Marvell MACCHIATObin, cortex-a72 based Marvell
ARMADA 8040 Community board. Comes in two forms: Single Shot and Double
Shot.

Specifications:
- Quad core Cortex-A72 (up to 2GHz)
- DDR4 DIMM slot with optional ECC and single/dual chip select support
- Dual 10GbE (1/2.5/10GbE) via copper or SFP
  2.5GbE (1/2.5GbE) via SFP
  1GbE via copper
- SPI Flash
- 3 X SATA 3.0 connectors
- MicroSD connector
- eMMC
- PCI x4 3.0 slot
- USB 2.0 Headers (Internal)
- USB 3.0 connector
- Console port (UART) over microUSB connector
- 20-pin Connector for CPU JTAG debugger
- 2 X UART Headers
- 12V input via DC Jack
- ATX type power connector
- Form Factor: Mini-ITX (170 mm x 170 mm)

More details at http://macchiatobin.net

Booting from micro SD card:
 1. reset U-Boot environment:
      env default -a
      saveenv

 2. prepare U-Boot with boot script:
      setenv bootcmd "load mmc 1:1 0x4d00000 boot.scr; source 0x4d00000"
      saveenv

   or manually:
      setenv fdt_name armada-8040-mcbin.dtb
      setenv image_name Image
      setenv bootcmd 'mmc dev 1; ext4load mmc 1:1 $kernel_addr $image_name;ext4load mmc 1:1 $fdt_addr $fdt_name;setenv   bootargs $console root=/dev/mmcblk1p2 rw rootwait; booti $kernel_addr - $fdt_addr'
      saveenv

Signed-off-by: Damir Samardzic <damir.samardzic@sartura.hr>
2018-03-31 16:13:19 +02:00

325 lines
11 KiB
Makefile

#
# Copyright (C) 2007-2008 OpenWrt.org
# Copyright (C) 2016 LEDE Project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
ifneq ($(__target_inc),1)
__target_inc=1
# default device type
DEVICE_TYPE?=router
# Default packages - the really basic set
DEFAULT_PACKAGES:=base-files libc libgcc busybox dropbear mtd uci opkg netifd fstools uclient-fetch logd
# For nas targets
DEFAULT_PACKAGES.nas:=block-mount fdisk lsblk mdadm
# For router targets
DEFAULT_PACKAGES.router:=dnsmasq iptables ip6tables ppp ppp-mod-pppoe firewall odhcpd-ipv6only odhcp6c kmod-ipt-offload
DEFAULT_PACKAGES.bootloader:=
ifneq ($(DUMP),)
all: dumpinfo
endif
target_conf=$(subst .,_,$(subst -,_,$(subst /,_,$(1))))
ifeq ($(DUMP),)
PLATFORM_DIR:=$(TOPDIR)/target/linux/$(BOARD)
SUBTARGET:=$(strip $(foreach subdir,$(patsubst $(PLATFORM_DIR)/%/target.mk,%,$(wildcard $(PLATFORM_DIR)/*/target.mk)),$(if $(CONFIG_TARGET_$(call target_conf,$(BOARD)_$(subdir))),$(subdir))))
else
PLATFORM_DIR:=${CURDIR}
ifeq ($(SUBTARGETS),)
SUBTARGETS:=$(strip $(patsubst $(PLATFORM_DIR)/%/target.mk,%,$(wildcard $(PLATFORM_DIR)/*/target.mk)))
endif
endif
TARGETID:=$(BOARD)$(if $(SUBTARGET),/$(SUBTARGET))
PLATFORM_SUBDIR:=$(PLATFORM_DIR)$(if $(SUBTARGET),/$(SUBTARGET))
ifneq ($(TARGET_BUILD),1)
ifndef DUMP
include $(PLATFORM_DIR)/Makefile
ifneq ($(PLATFORM_DIR),$(PLATFORM_SUBDIR))
include $(PLATFORM_SUBDIR)/target.mk
endif
endif
else
ifneq ($(SUBTARGET),)
-include ./$(SUBTARGET)/target.mk
endif
endif
ifneq ($(filter 3.18 4.4 4.9,$(KERNEL_PATCHVER)),)
DEFAULT_PACKAGES.router:=$(filter-out kmod-ipt-offload,$(DEFAULT_PACKAGES.router))
endif
# Add device specific packages (here below to allow device type set from subtarget)
DEFAULT_PACKAGES += $(DEFAULT_PACKAGES.$(DEVICE_TYPE))
filter_packages = $(filter-out -% $(patsubst -%,%,$(filter -%,$(1))),$(1))
extra_packages = $(if $(filter wpad-mini wpad nas,$(1)),iwinfo)
define ProfileDefault
NAME:=
PRIORITY:=
PACKAGES:=
endef
ifndef Profile
define Profile
$(eval $(call ProfileDefault))
$(eval $(call Profile/$(1)))
dumpinfo : $(call shexport,Profile/$(1)/Description)
DEFAULT_PACKAGES := $(filter-out $(patsubst -%,%,$(filter -%,$(PACKAGES))),$(DEFAULT_PACKAGES))
PACKAGES := $(filter-out -%,$(PACKAGES))
DUMPINFO += \
echo "Target-Profile: $(1)"; \
$(if $(PRIORITY), echo "Target-Profile-Priority: $(PRIORITY)"; ) \
echo "Target-Profile-Name: $(NAME)"; \
echo "Target-Profile-Packages: $(PACKAGES) $(call extra_packages,$(DEFAULT_PACKAGES) $(PACKAGES))"; \
echo "Target-Profile-Description:"; \
echo "$$$$$$$$$(call shvar,Profile/$(1)/Description)"; \
echo "@@"; \
echo;
endef
endif
ifneq ($(PLATFORM_DIR),$(PLATFORM_SUBDIR))
define IncludeProfiles
-include $(sort $(wildcard $(PLATFORM_DIR)/profiles/*.mk))
-include $(sort $(wildcard $(PLATFORM_SUBDIR)/profiles/*.mk))
endef
else
define IncludeProfiles
-include $(sort $(wildcard $(PLATFORM_DIR)/profiles/*.mk))
endef
endif
PROFILE?=$(call qstrip,$(CONFIG_TARGET_PROFILE))
ifeq ($(TARGET_BUILD),1)
ifneq ($(DUMP),)
$(eval $(call IncludeProfiles))
endif
endif
ifneq ($(TARGET_BUILD)$(if $(DUMP),,1),)
include $(INCLUDE_DIR)/kernel-version.mk
endif
GENERIC_PLATFORM_DIR := $(TOPDIR)/target/linux/generic
GENERIC_BACKPORT_DIR := $(GENERIC_PLATFORM_DIR)/backport$(if $(wildcard $(GENERIC_PLATFORM_DIR)/backport-$(KERNEL_PATCHVER)),-$(KERNEL_PATCHVER))
GENERIC_PATCH_DIR := $(GENERIC_PLATFORM_DIR)/pending$(if $(wildcard $(GENERIC_PLATFORM_DIR)/pending-$(KERNEL_PATCHVER)),-$(KERNEL_PATCHVER))
GENERIC_HACK_DIR := $(GENERIC_PLATFORM_DIR)/hack$(if $(wildcard $(GENERIC_PLATFORM_DIR)/hack-$(KERNEL_PATCHVER)),-$(KERNEL_PATCHVER))
GENERIC_FILES_DIR := $(foreach dir,$(wildcard $(GENERIC_PLATFORM_DIR)/files $(GENERIC_PLATFORM_DIR)/files-$(KERNEL_PATCHVER)),"$(dir)")
__config_name_list = $(1)/config-$(KERNEL_PATCHVER) $(1)/config-default
__config_list = $(firstword $(wildcard $(call __config_name_list,$(1))))
find_kernel_config=$(if $(__config_list),$(__config_list),$(lastword $(__config_name_list)))
GENERIC_LINUX_CONFIG = $(call find_kernel_config,$(GENERIC_PLATFORM_DIR))
LINUX_TARGET_CONFIG = $(call find_kernel_config,$(PLATFORM_DIR))
ifneq ($(PLATFORM_DIR),$(PLATFORM_SUBDIR))
LINUX_SUBTARGET_CONFIG = $(call find_kernel_config,$(PLATFORM_SUBDIR))
endif
# config file list used for compiling
LINUX_KCONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_TARGET_CONFIG) $(LINUX_SUBTARGET_CONFIG) $(TOPDIR)/env/kernel-config)
# default config list for reconfiguring
# defaults to subtarget if subtarget exists and target does not
# defaults to target otherwise
USE_SUBTARGET_CONFIG = $(if $(wildcard $(LINUX_TARGET_CONFIG)),,$(if $(LINUX_SUBTARGET_CONFIG),1))
LINUX_RECONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_TARGET_CONFIG) $(if $(USE_SUBTARGET_CONFIG),$(LINUX_SUBTARGET_CONFIG)))
LINUX_RECONFIG_TARGET = $(if $(USE_SUBTARGET_CONFIG),$(LINUX_SUBTARGET_CONFIG),$(LINUX_TARGET_CONFIG))
# select the config file to be changed by kernel_menuconfig/kernel_oldconfig
ifeq ($(CONFIG_TARGET),platform)
LINUX_RECONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_TARGET_CONFIG))
LINUX_RECONFIG_TARGET = $(LINUX_TARGET_CONFIG)
endif
ifeq ($(CONFIG_TARGET),subtarget)
LINUX_RECONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_TARGET_CONFIG) $(LINUX_SUBTARGET_CONFIG))
LINUX_RECONFIG_TARGET = $(LINUX_SUBTARGET_CONFIG)
endif
ifeq ($(CONFIG_TARGET),subtarget_platform)
LINUX_RECONFIG_LIST = $(wildcard $(GENERIC_LINUX_CONFIG) $(LINUX_SUBTARGET_CONFIG) $(LINUX_TARGET_CONFIG))
LINUX_RECONFIG_TARGET = $(LINUX_TARGET_CONFIG)
endif
ifeq ($(CONFIG_TARGET),env)
LINUX_RECONFIG_LIST = $(LINUX_KCONFIG_LIST)
LINUX_RECONFIG_TARGET = $(TOPDIR)/env/kernel-config
endif
__linux_confcmd = $(SCRIPT_DIR)/kconfig.pl $(2) $(patsubst %,+,$(wordlist 2,9999,$(1))) $(1)
LINUX_CONF_CMD = $(call __linux_confcmd,$(LINUX_KCONFIG_LIST),)
LINUX_RECONF_CMD = $(call __linux_confcmd,$(LINUX_RECONFIG_LIST),)
LINUX_RECONF_DIFF = $(call __linux_confcmd,$(filter-out $(LINUX_RECONFIG_TARGET),$(LINUX_RECONFIG_LIST)),'>')
ifeq ($(DUMP),1)
BuildTarget=$(BuildTargets/DumpCurrent)
CPU_CFLAGS = -Os -pipe
ifneq ($(findstring mips,$(ARCH)),)
ifneq ($(findstring mips64,$(ARCH)),)
CPU_TYPE ?= mips64
else
CPU_TYPE ?= mips32
endif
CPU_CFLAGS += -mno-branch-likely
CPU_CFLAGS_mips32 = -mips32 -mtune=mips32
CPU_CFLAGS_mips64 = -mips64 -mtune=mips64 -mabi=64
CPU_CFLAGS_24kc = -mips32r2 -mtune=24kc
CPU_CFLAGS_74kc = -mips32r2 -mtune=74kc
CPU_CFLAGS_octeon = -march=octeon -mabi=64
endif
ifeq ($(ARCH),i386)
CPU_TYPE ?= pentium
CPU_CFLAGS_pentium = -march=pentium-mmx
CPU_CFLAGS_pentium4 = -march=pentium4
endif
ifneq ($(findstring arm,$(ARCH)),)
CPU_TYPE ?= xscale
CPU_CFLAGS_arm920t = -mcpu=arm920t
CPU_CFLAGS_arm926ej-s = -mcpu=arm926ej-s
CPU_CFLAGS_arm1136j-s = -mcpu=arm1136j-s
CPU_CFLAGS_arm1176jzf-s = -mcpu=arm1176jzf-s
CPU_CFLAGS_cortex-a5 = -mcpu=cortex-a5
CPU_CFLAGS_cortex-a7 = -mcpu=cortex-a7
CPU_CFLAGS_cortex-a8 = -mcpu=cortex-a8
CPU_CFLAGS_cortex-a9 = -mcpu=cortex-a9
CPU_CFLAGS_cortex-a15 = -mcpu=cortex-a15
CPU_CFLAGS_cortex-a53 = -mcpu=cortex-a53
CPU_CFLAGS_cortex-a72 = -mcpu=cortex-a72
CPU_CFLAGS_fa526 = -mcpu=fa526
CPU_CFLAGS_mpcore = -mcpu=mpcore
CPU_CFLAGS_xscale = -mcpu=xscale
ifeq ($(CONFIG_SOFT_FLOAT),)
CPU_CFLAGS_neon = -mfpu=neon
CPU_CFLAGS_vfp = -mfpu=vfp
CPU_CFLAGS_vfpv3 = -mfpu=vfpv3-d16
CPU_CFLAGS_neon-vfpv4 = -mfpu=neon-vfpv4
endif
endif
ifeq ($(ARCH),powerpc)
CPU_CFLAGS_603e:=-mcpu=603e
CPU_CFLAGS_8540:=-mcpu=8540
CPU_CFLAGS_405:=-mcpu=405
CPU_CFLAGS_440:=-mcpu=440
CPU_CFLAGS_464fp:=-mcpu=464fp
endif
ifeq ($(ARCH),powerpc64)
CPU_TYPE ?= powerpc64
CPU_CFLAGS_powerpc64:=-mcpu=powerpc64
endif
ifeq ($(ARCH),sparc)
CPU_TYPE = sparc
CPU_CFLAGS_ultrasparc = -mcpu=ultrasparc
endif
ifeq ($(ARCH),aarch64)
CPU_TYPE ?= generic
CPU_CFLAGS_generic = -mcpu=generic
CPU_CFLAGS_cortex-a53 = -mcpu=cortex-a53
endif
ifeq ($(ARCH),arc)
CPU_TYPE ?= arc700
CPU_CFLAGS += -matomic
CPU_CFLAGS_arc700 = -mcpu=arc700
CPU_CFLAGS_archs = -mcpu=archs
endif
ifneq ($(CPU_TYPE),)
ifndef CPU_CFLAGS_$(CPU_TYPE)
$(warning CPU_TYPE "$(CPU_TYPE)" doesn't correspond to a known type)
endif
endif
DEFAULT_CFLAGS=$(strip $(CPU_CFLAGS) $(CPU_CFLAGS_$(CPU_TYPE)) $(CPU_CFLAGS_$(CPU_SUBTYPE)))
ifneq ($(BOARD),)
TMP_CONFIG:=$(TMP_DIR)/.kconfig-$(call target_conf,$(TARGETID))
$(TMP_CONFIG): $(LINUX_KCONFIG_LIST)
$(LINUX_CONF_CMD) > $@ || rm -f $@
-include $(TMP_CONFIG)
.SILENT: $(TMP_CONFIG)
.PRECIOUS: $(TMP_CONFIG)
ifneq ($(CONFIG_OF),)
FEATURES += dt
endif
ifneq ($(CONFIG_GENERIC_GPIO)$(CONFIG_GPIOLIB),)
FEATURES += gpio
endif
ifneq ($(CONFIG_PCI),)
FEATURES += pci
endif
ifneq ($(CONFIG_PCIEPORTBUS),)
FEATURES += pcie
endif
ifneq ($(CONFIG_USB)$(CONFIG_USB_SUPPORT),)
ifneq ($(CONFIG_USB_ARCH_HAS_HCD)$(CONFIG_USB_EHCI_HCD),)
FEATURES += usb
endif
endif
ifneq ($(CONFIG_PCMCIA)$(CONFIG_PCCARD),)
FEATURES += pcmcia
endif
ifneq ($(CONFIG_VGA_CONSOLE)$(CONFIG_FB),)
FEATURES += display
endif
ifneq ($(CONFIG_RTC_CLASS),)
FEATURES += rtc
endif
ifneq ($(CONFIG_VIRTIO),)
FEATURES += virtio
endif
ifneq ($(CONFIG_CPU_MIPS32_R2),)
FEATURES += mips16
endif
FEATURES += $(foreach v,6 7,$(if $(CONFIG_CPU_V$(v)),arm_v$(v)))
# remove duplicates
FEATURES:=$(sort $(FEATURES))
endif
endif
CUR_SUBTARGET:=$(SUBTARGET)
ifeq ($(SUBTARGETS),)
CUR_SUBTARGET := default
endif
define BuildTargets/DumpCurrent
.PHONY: dumpinfo
dumpinfo : export DESCRIPTION=$$(Target/Description)
dumpinfo:
@echo 'Target: $(TARGETID)'; \
echo 'Target-Board: $(BOARD)'; \
echo 'Target-Name: $(BOARDNAME)$(if $(SUBTARGETS),$(if $(SUBTARGET),))'; \
echo 'Target-Arch: $(ARCH)'; \
echo 'Target-Arch-Packages: $(if $(ARCH_PACKAGES),$(ARCH_PACKAGES),$(ARCH)$(if $(CPU_TYPE),_$(CPU_TYPE))$(if $(CPU_SUBTYPE),_$(CPU_SUBTYPE)))'; \
echo 'Target-Features: $(FEATURES)'; \
echo 'Target-Depends: $(DEPENDS)'; \
echo 'Target-Optimization: $(if $(CFLAGS),$(CFLAGS),$(DEFAULT_CFLAGS))'; \
echo 'CPU-Type: $(CPU_TYPE)$(if $(CPU_SUBTYPE),+$(CPU_SUBTYPE))'; \
echo 'Linux-Version: $(LINUX_VERSION)'; \
echo 'Linux-Release: $(LINUX_RELEASE)'; \
echo 'Linux-Kernel-Arch: $(LINUX_KARCH)'; \
$(if $(SUBTARGET),,$(if $(DEFAULT_SUBTARGET), echo 'Default-Subtarget: $(DEFAULT_SUBTARGET)'; )) \
echo 'Target-Description:'; \
echo "$$$$DESCRIPTION"; \
echo '@@'; \
echo 'Default-Packages: $(DEFAULT_PACKAGES) $(call extra_packages,$(DEFAULT_PACKAGES))'; \
$(DUMPINFO)
$(if $(CUR_SUBTARGET),$(SUBMAKE) -r --no-print-directory -C image -s DUMP=1 SUBTARGET=$(CUR_SUBTARGET))
$(if $(SUBTARGET),,@$(foreach SUBTARGET,$(SUBTARGETS),$(SUBMAKE) -s DUMP=1 SUBTARGET=$(SUBTARGET); ))
endef
include $(INCLUDE_DIR)/kernel.mk
ifeq ($(TARGET_BUILD),1)
include $(INCLUDE_DIR)/kernel-build.mk
BuildTarget?=$(BuildKernel)
endif
endif #__target_inc