openwrtv4/target/linux/brcm63xx/patches-3.14/561-board_WAP-5813n.patch
Jonas Gorski 770ba9d40f brcm63xx: enable fallback sprom for Speedport W500 V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42211
2014-08-18 21:50:45 +00:00

136 lines
2.9 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -13,6 +13,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pci_ids.h>
+#include <linux/platform_data/b53.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
@@ -4163,6 +4164,117 @@ static struct board_info __initdata boar
.has_ohci0 = 1,
.has_ehci0 = 1,
};
+
+static struct b53_platform_data WAP5813n_b53_pdata = {
+ .alias = "eth0",
+};
+
+static struct spi_board_info WAP5813n_spi_devices[] = {
+ {
+ .modalias = "b53-switch",
+ .max_speed_hz = 781000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &WAP5813n_b53_pdata,
+ }
+};
+
+static struct sprom_fixup __initdata wap5813n_fixups[] = {
+ { .offset = 97, .value = 0xfeed },
+ { .offset = 98, .value = 0x15d1 },
+ { .offset = 99, .value = 0xfb0d },
+ { .offset = 113, .value = 0xfef7 },
+ { .offset = 114, .value = 0x15f7 },
+ { .offset = 115, .value = 0xfb1a },
+};
+
+static struct board_info __initdata board_WAP5813n = {
+ .name = "96369R-1231N",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [4] = {
+ .used = 1,
+ .phy_id = 0xff,
+ .bypass_link = 1,
+ .force_speed = 1000,
+ .force_duplex_full = 1,
+ .name = "RGMII",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "WAP-5813n:green:power",
+ .gpio = 22,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "WAP-5813n:red:power",
+ .gpio = 24,
+ },
+ {
+ .name = "WAP-5813n:green:inet",
+ .gpio = 5,
+ },
+ {
+ .name = "WAP-5813n:red:inet",
+ .gpio = 31,
+ },
+ {
+ .name = "WAP-5813n:green:wps",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "wlan",
+ .gpio = 32,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WLAN,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "reset",
+ .gpio = 34,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "wps",
+ .gpio = 35,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43222,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = wap5813n_fixups,
+ .num_board_fixups = ARRAY_SIZE(wap5813n_fixups),
+ },
+
+ .spis = WAP5813n_spi_devices,
+ .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
+};
#endif /* CONFIG_BCM63XX_CPU_6368 */
/*
@@ -4542,6 +4654,7 @@ static const struct board_info __initcon
#ifdef CONFIG_BCM63XX_CPU_6368
&board_96368mvwg,
&board_96368mvngr,
+ &board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
&board_963268bu_p300,