openwrtv4/target/linux/mvebu/patches-4.9/403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
Koen Vandeputte e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00

52 lines
1.8 KiB
Diff

From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 4 Jan 2017 21:00:51 +0000
Subject: [PATCH] net: phy: avoid setting unsupported EEE advertisments
We currently allow userspace to set any EEE advertisments it desires,
whether or not the PHY supports them. For example:
# ethtool --set-eee eth1 advertise 0xffffffff
# ethtool --show-eee eth1
EEE Settings for eth1:
EEE status: disabled
Tx LPI: disabled
Supported EEE link modes: 100baseT/Full
1000baseT/Full
10000baseT/Full
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
1000baseKX/Full
10000baseT/Full
10000baseKX4/Full
10000baseKR/Full
Clearly, this is not sane, we should only allow link modes that are
supported to be advertised (as we do elsewhere.) Ensure that we mask
the MDIO_AN_EEE_ADV value with the capabilities retrieved from the
MDIO_PCS_EEE_ABLE register.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1343,11 +1343,16 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
- int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
+ int cap, adv;
- phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val);
+ /* Get Supported EEE */
+ cap = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+ if (cap < 0)
+ return cap;
- return 0;
+ adv = ethtool_adv_to_mmd_eee_adv_t(data->advertised) & cap;
+
+ return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
}
EXPORT_SYMBOL(phy_ethtool_set_eee);