bf39d5594b
TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani <aep@exys.org>
207 lines
6 KiB
C
207 lines
6 KiB
C
/*
|
|
* Atheros ARCHER_C7 reference board support
|
|
*
|
|
* Copyright (c) 2018 Arvid E. Picciani <aep@exys.org>
|
|
* Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
|
|
* Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ath9k_platform.h>
|
|
#include <linux/ar8216_platform.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/spi/spi_gpio.h>
|
|
#include <linux/spi/74x164.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-m25p80.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-spi.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
|
|
|
|
#define ARCHER_C7_GPIO_BTN_RESET 5
|
|
#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2
|
|
|
|
#define ARCHER_C7_GPIO_LED_WLAN5 9
|
|
#define ARCHER_C7_GPIO_LED_POWER 6
|
|
#define ARCHER_C7_GPIO_LED_USB 7
|
|
#define ARCHER_C7_GPIO_LED_WPS 1
|
|
#define ARCHER_C7_GPIO_LED_LAN1 8
|
|
#define ARCHER_C7_GPIO_LED_LAN2 17
|
|
#define ARCHER_C7_GPIO_LED_LAN3 16
|
|
#define ARCHER_C7_GPIO_LED_LAN4 15
|
|
#define ARCHER_C7_GPIO_LED_WAN_GREEN 21
|
|
#define ARCHER_C7_GPIO_LED_WAN_AMBER 20
|
|
#define ARCHER_C7_GPIO_LED_WLAN2 14
|
|
#define ARCHER_C7_GPIO_USB_PWR 19
|
|
|
|
#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
|
|
|
|
#define ARCHER_C7_MAC0_OFFSET 0
|
|
#define ARCHER_C7_MAC1_OFFSET 6
|
|
#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
#define ARCHER_C7_GPIO_MDC 3
|
|
#define ARCHER_C7_GPIO_MDIO 4
|
|
|
|
static struct gpio_led archer_c7_v5_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "archer-c7-v5:green:power",
|
|
.gpio = ARCHER_C7_GPIO_LED_POWER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:wps",
|
|
.gpio = ARCHER_C7_GPIO_LED_WPS,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:wlan2g",
|
|
.gpio = ARCHER_C7_GPIO_LED_WLAN2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:wlan5g",
|
|
.gpio = ARCHER_C7_GPIO_LED_WLAN5,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:lan1",
|
|
.gpio = ARCHER_C7_GPIO_LED_LAN1,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:lan2",
|
|
.gpio = ARCHER_C7_GPIO_LED_LAN2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:lan3",
|
|
.gpio = ARCHER_C7_GPIO_LED_LAN3,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:lan4",
|
|
.gpio = ARCHER_C7_GPIO_LED_LAN4,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:wan",
|
|
.gpio = ARCHER_C7_GPIO_LED_WAN_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:amber:wan",
|
|
.gpio = ARCHER_C7_GPIO_LED_WAN_AMBER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "archer-c7-v5:green:usb",
|
|
.gpio = ARCHER_C7_GPIO_LED_USB,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_button archer_c7_v5_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "WPS and WIFI button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.desc = "Reset button",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ARCHER_C7_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
|
|
static struct ar8327_pad_cfg archer_c7_v5_ar8337_pad0_cfg = {
|
|
.mode = AR8327_PAD_MAC_SGMII,
|
|
.sgmii_delay_en = true,
|
|
};
|
|
|
|
static struct ar8327_platform_data archer_c7_v5_ar8337_data = {
|
|
.pad0_cfg = &archer_c7_v5_ar8337_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info archer_c7_v5_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 0,
|
|
.platform_data = &archer_c7_v5_ar8337_data,
|
|
},
|
|
};
|
|
|
|
|
|
static void __init archer_c7_v5_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
|
|
u8 *mac = (u8 *) KSEG1ADDR(0x1f060008);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v5_leds_gpio),
|
|
archer_c7_v5_leds_gpio);
|
|
|
|
ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(archer_c7_v5_gpio_keys),
|
|
archer_c7_v5_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
|
|
ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
|
|
ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
|
|
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(archer_c7_v5_mdio0_info,
|
|
ARRAY_SIZE(archer_c7_v5_mdio0_info));
|
|
|
|
gpio_request_one(ARCHER_C7_GPIO_USB_PWR,
|
|
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
|
"USB power");
|
|
|
|
ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
|
|
ath79_register_pci();
|
|
|
|
/* GMAC0 is connected to an AR8337 switch */
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth0_data.speed = SPEED_1000;
|
|
ath79_eth0_data.duplex = DUPLEX_FULL;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_register_eth(0);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V5, "ARCHER-C7-V5", "TP-LINK Archer C7 v5",
|
|
archer_c7_v5_setup);
|